My Vehicle:

Search Filter:
Brand
    x
  • Check All Brands
  • Dayco
  • Gates
  • Uncheck All Brand(s)
Position
    x
  • Check All Positions
  • Lower
  • Lower - Radiator To Tee
  • Lower - Tee To Engine
  • Lower - Thermostat To Tee
  • Uncheck All Position(s)

2013 Audi A4 allroad Radiator Coolant Hose

We have found 3 Radiator Coolant Hose for
2013 Audi A4 allroad 2013 Audi A4 allroad
Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72313
2013 Audi A4 allroad Radiator Coolant Hose DY 72313

Dayco Radiator Coolant Hose 72313

DY

Description:

  • Dayco Molded Radiator and ByPass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil mud salt road debris ozone coolants and temperature variations of 40F 40C to 257F 125C that are required for OEM hose replacements The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose In addition to meeting SAE J20R4 Class D1 requirements this hose is now designed to meet Type EC electrochemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges
  • CURVED RADIATOR HOSE DAYCO
  • RADIATOR HOSE

Additional Details:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 17 1/2
  • End 1 Inside Diameter (Describes Inside Diameter Of End) : 1 7/32
  • End 2 Inside Diameter (Describes Inside Diameter Of End) : 1 7/32
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color (Describes Color) : Black
  • Material (Describes Material) : EPDM
  • SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC
New
036687663290
$9.01
8
2 Years WarrantyFast ShippingFlat 15% Off
Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72010
2013 Audi A4 allroad Radiator Coolant Hose DY 72010

Dayco Radiator Coolant Hose 72010

DY

Description:

  • Dayco Molded Radiator and ByPass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil mud salt road debris ozone coolants and temperature variations of 40F 40C to 257F 125C that are required for OEM hose replacements The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose In addition to meeting SAE J20R4 Class D1 requirements this hose is now designed to meet Type EC electrochemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges
  • CURVED RADIATOR HOSE DAYCO
  • RADIATOR HOSE

Additional Details:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 6
  • End 1 Inside Diameter (Describes Inside Diameter Of End) : 1 1/4
  • End 2 Inside Diameter (Describes Inside Diameter Of End) : 1 1/4
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color (Describes Color) : Black
  • Material (Describes Material) : EPDM
  • SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC
New
036687164810
$10.08
14
2 Years WarrantyFast ShippingFlat 15% Off
Part Name: Radiator Coolant HoseBrand: GatesPart#: 23686
2013 Audi A4 allroad Radiator Coolant Hose ZO 23686
2013 Audi A4 allroad Radiator Coolant Hose ZO 23686

Gates Radiator Coolant Hose 23686

ZO

Description:

  • pGates Molded Coolant Hose is manufactured to fit specific applications Similar to OEM specifications Approved for marine applications/pulliRecommend for upper lower bypass heater and other coolant hose applications/liliHeat and ozone resistant cover/liliEngineered to resist electrochemical degradation the leading cause of hose failure/liliReengineered materials resist vacuum collapse This reduces the need for internal springs in many applications/liliMeets SAE 20R4 and 20R3 Type EC Class D1 and D2 specifications/li/ulpTemperature Rating 40 F to 275 F 40 C to 135 C in coolant hose applications/ppbNote/b Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGripR SB Clamps each time a new coolant hose is installed/ppbGates Powering Progress/b/p
  • Molded Coolant Hose
  • Hose

Additional Details:

  • Centerline Length (in) : 18.8
  • Centerline Length (mm) : 478
  • Number of Branches : 0
  • Inside Diameter 1 (in) : 1.22
  • Inside Diameter 1 (mm) : 31
  • Inside Diameter 2 (in) : 1.26
  • Inside Diameter 2 (mm) : 32
  • Contains Spring : No
1
New
770075460206
$35.11
7
2 Years WarrantyFast ShippingFlat 15% Off