2004 BMW 325i HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: CRPPart#: CHH0158R

CRP HVAC Heater Hose CHH0158R - Engine To Heater Valve Inlet

Position: Engine To Heater Valve Inlet

Description:

Rein OE Quality Heater Hose
Heater Hose

Condition: New

Fitments
This Part Fits Following 2004 BMW 325i Engines.
Engine Sub Model Notes Position
2.5L L6 Base w/Quick Connectors Engine To Heater Valve Inlet
Warranty & Easy Return
Manufacturer’s Warranty : 24 months / 24,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L L6	Base	w/Quick Connectors	Engine To Heater Valve Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88498

Dayco HVAC Heater Hose 88498 - Reservoir To Pipe

Position: Reservoir To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 20
End 1 Inside Diameter : 13/16
End 1 Outside Diameter : 1 13/32
End 2 Inside Diameter : 13/16
End 2 Outside Diameter : 1 13/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2004 BMW 325i Engines.
Engine Sub Model Notes Position
2.5L L6 Base w/Quick Connectors - Small I.D. Heater Hose Reservoir To Pipe
Part Interchange
ACDelco 22743L
BMW 11.53.1.436.410
CARQUEST 23927
Duralast E88498
Gates 23927
NAPA 16595
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L L6	Base	w/Quick Connectors - Small I.D. Heater Hose	Reservoir To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88504

Dayco HVAC Heater Hose 88504 - Valve To Engine

Position: Valve To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 20 1/2
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 1 13/32
End 2 Inside Diameter : 13/16
End 2 Outside Diameter : 1 3/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2004 BMW 325i Engines.
Engine Sub Model Notes Position
2.5L L6 Base Small I.D. Heater Hose Valve To Engine
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L L6	Base	Small I.D. Heater Hose	Valve To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 23927

Gates HVAC Heater Hose 23927 - Reservoir To Pipe

Position: Reservoir To Pipe

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 21
Inside Diameter 1 : .77
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 BMW 325i Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L6 Base Molded Coolant Hose Fuel Type: GAS Reservoir To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L6	Base	Molded Coolant Hose	Fuel Type: GAS	Reservoir To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 23923

Gates HVAC Heater Hose 23923 - Engine To Valve

Position: Engine To Valve

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 26.5
Inside Diameter 1 : .77
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 BMW 325i Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L6 Base Molded Coolant Hose Fuel Type: GAS Engine To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L6	Base	Molded Coolant Hose	Fuel Type: GAS	Engine To Valve

Part Name: HVAC Heater HoseBrand: GatesPart#: 23926

Gates HVAC Heater Hose 23926 - Heater Outlet

Position: Heater Outlet

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 35
Inside Diameter 1 : .77
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 BMW 325i Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L6 Base Molded Coolant Hose Fuel Type: GAS Heater Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2004 BMW 325i HVAC Heater Hose

CRP HVAC Heater Hose CHH0158R - Engine To Heater Valve Inlet

Description:

Dayco HVAC Heater Hose 88498 - Reservoir To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88504 - Valve To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 23927 - Reservoir To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 23923 - Engine To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 23926 - Heater Outlet

Description:

Part Specifications:

Features:

Related HVAC Parts

ACDelco	22743L
BMW	11.53.1.436.410
CARQUEST	23927
Duralast	E88498
Gates	23927
NAPA	16595

My Vehicle:

2004 BMW 325i HVAC Heater Hose

CRP HVAC Heater Hose CHH0158R - Engine To Heater Valve Inlet

Description:

Dayco HVAC Heater Hose 88498 - Reservoir To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88504 - Valve To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 23927 - Reservoir To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 23923 - Engine To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 23926 - Heater Outlet

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X