2001 BMW Z3 Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71532

Dayco Radiator Coolant Hose 71532 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 10
End 1 Inside Diameter : 1 7/16
End 2 Inside Diameter : 1 7/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments

This Part Fits Following 2001 BMW Z3 Engines.

Engine	Sub Model	Notes	Position
2.5L L6	Roadster	Cut to Fit, Reuse OEM Connector - w/o Quick Connect - Curved Radiator Hose	Lower
3.0L L6	3.0i, Coupe, Roadster	Cut to Fit, Reuse OEM Connector - w/o Quick Connect - Curved Radiator Hose	Lower

Part Interchange

ACDelco	22215M
Atlas	MC213
BMW	11.53.1.716.642
BMW	11.53.1.716.642C
CARQUEST	21623
Duralast	B71532
Ford	F27A-8B273-PA
Ford	F27A-8B273-PB
Ford	F2TZ-8286-B
Ford	F07Z-8286-A
Ford	F17A-8B273-NA
Ford	F07A-8B273-AC
Freshstart	470
Gates	21623
Goodyear	61617
Mazda	ZZL2-15-185
Motorcraft	KM2003
NAPA	8341

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71663

2001 BMW Z3 Radiator Coolant Hose DY 71663

Dayco Radiator Coolant Hose 71663 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 1 19/32
End 2 Inside Diameter : 1 19/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments

This Part Fits Following 2001 BMW Z3 Engines.

Engine	Sub Model	Notes	Position
2.5L L6	Roadster	Cut to Fit, Reuse OEM Connector - Curved Radiator Hose	Upper
3.0L L6	3.0i, Coupe, Roadster	Cut to Fit, Reuse OEM Connector - Curved Radiator Hose	Upper
3.2L L6	M Coupe, M Roadster	Curved Radiator Hose	Upper

Part Interchange

ACDelco	22361M
ACDelco	20372S
ACDelco	22725M
BMW	11 53 1 716 841B
BMW	11 53 1 720 722
BMW	11 231 1 740 832
BMW	11 53 1 716 641B
BMW	11 53 4 460 438 9
BMW	11 53 7 830 716C
BMW	11 53 1 436 357D
BMW	11 53 1 433 340
BMW	11 53 1 716 641
BMW	11 53 1 436 358D
BMW	11 53 1 705 223C
BMW	11 53 1 708 499B
BMW	11 53 1 708 499
CARQUEST	23888
CARQUEST	22638
CARQUEST	22439
Duralast	C71663
Gates	22638
Gates	23888
Gates	22439
Goodyear	62746
Goodyear	62463
NAPA	9271
NAPA	16558
NAPA	9072

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71664

2001 BMW Z3 Radiator Coolant Hose DY 71664

Dayco Radiator Coolant Hose 71664 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 1 19/32
End 2 Inside Diameter : 1 19/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2001 BMW Z3 Engines.
Engine Sub Model Notes Position
3.2L L6 M Coupe, M Roadster Curved Radiator Hose Lower
Part Interchange
ACDelco 22360M
BMW 11 53 1 436 988
BMW 1.726.344
BMW 11.53.1.436.988
BMW 11 53 1 726 344
CARQUEST 22440
Duralast B71664
Gates 22440
Goodyear 62476
NAPA 9073
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.2L L6	M Coupe, M Roadster	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22439

2001 BMW Z3 Radiator Coolant Hose ZO 22439

Gates Radiator Coolant Hose 22439 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 13.8
Inside Diameter 1 : 1.61
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2001 BMW Z3 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L6	Roadster	W/O Quick Connect Fitting; Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Upper
3.0L L6	3.0i, Coupe, Roadster	W/O Quick Connect Fitting; Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Upper
3.2L L6	M Coupe, M Roadster	W/Eng. S52 - Molded Coolant Hose	Fuel Type: GAS	Upper

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72791

2001 BMW Z3 Radiator Coolant Hose DY 72791

Dayco Radiator Coolant Hose 72791 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 11 1/2
End 1 Inside Diameter : 1 1/2
End 1 Outside Diameter : 2
End 2 Inside Diameter : 1 17/32
End 2 Outside Diameter : 1 15/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2001 BMW Z3 Engines.
Engine Sub Model Notes Position
2.5L L6 Roadster w/Quick Connect - Curved Radiator Hose Lower
3.0L L6 3.0i, Coupe, Roadster w/Quick Connect - Curved Radiator Hose Lower
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L L6	Roadster	w/Quick Connect - Curved Radiator Hose	Lower
3.0L L6	3.0i, Coupe, Roadster	w/Quick Connect - Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22440

2001 BMW Z3 Radiator Coolant Hose ZO 22440

Gates Radiator Coolant Hose 22440 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 15.3
Inside Diameter 1 : 1.61
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 BMW Z3 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L6 Roadster W/O Quick Connect Fitting - Molded Coolant Hose Fuel Type: GAS Lower
3.2L L6 M Coupe, M Roadster W/Eng. S52 - Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2001 BMW Z3 Radiator Coolant Hose

Dayco Radiator Coolant Hose 71532 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71663 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71664 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22439 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72791 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22440 - Lower

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

ACDelco	22360M
BMW	11 53 1 436 988
BMW	1.726.344
BMW	11.53.1.436.988
BMW	11 53 1 726 344
CARQUEST	22440
Duralast	B71664
Gates	22440
Goodyear	62476
NAPA	9073

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L6	Roadster	W/O Quick Connect Fitting - Molded Coolant Hose	Fuel Type: GAS	Lower
3.2L L6	M Coupe, M Roadster	W/Eng. S52 - Molded Coolant Hose	Fuel Type: GAS	Lower

My Vehicle:

2001 BMW Z3 Radiator Coolant Hose

Dayco Radiator Coolant Hose 71532 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71663 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71664 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22439 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72791 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22440 - Lower

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X