2000 Chevrolet Tracker Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 70846

Dayco Radiator Coolant Hose 70846 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet Tracker Engines.
Engine Sub Model Notes Position
2.0L L4 Base, LSi Cut to Fit - Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
2.0L L4	Base, LSi	Cut to Fit - Curved Radiator Hose	Upper

Part Interchange

ACDelco	20064S
ACDelco	20091S
Audi	06C.121.445A
CARQUEST	20774
CARQUEST	20940
Datsun/Nissan	21503-11M11
Datsun/Nissan	21503-11M02
Datsun/Nissan	21632-AR000
Duralast	B70846
Ford	D6TZ-8548-A
Ford	74EB-8260-AC
Ford	77FB-8260-AC
Gates	20940
Gates	20774
Goodyear	62661
Goodyear	60857
Kia	0K52Y-15-191C
NAPA	7537
NAPA	7665
Navistar	672242-C1
Navistar	672242-C2
Peugeot	1303.69
Suzuki	17841-65D10
Toyota	90916-01066
Toyota	16571-35040
Toyota	16571-35030
Toyota	16571-54130
Toyota	16571-54050
Toyota	16571-37010
Volvo Cars	476715

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 70988

2000 Chevrolet Tracker Radiator Coolant Hose DY 70988

Dayco Radiator Coolant Hose 70988 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12 1/4
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet Tracker Engines.
Engine Sub Model Notes Position
1.6L L4 Base, LSi Cut to Fit - Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
1.6L L4	Base, LSi	Cut to Fit - Curved Radiator Hose	Upper

Part Interchange

ACDelco	20154S
ACDelco	22134M
AutoZone	C1186
Beck/Arnley	142-6055
Beck/Arnley	142-5954
Beck/Arnley	142-5969
Beck/Arnley	142-5926
CARQUEST	21186
CARQUEST	21398
Duralast	C70988
Gates	21398
Gates	21186
General Motors	30021714
Goodyear	61166
Goodyear	62720
Lazorlite	L34-5610
Lazorlite	U34-2319
Mazda	E331-15-185A
NAPA	7896
NAPA	8095
Pirelli	41334
Suzuki	17841-66D00
Suzuki	17841-66D10
Toyota	16571-63020
Toyota	16571-64050
Toyota	16571-64070

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 20940

2000 Chevrolet Tracker Radiator Coolant Hose ZO 20940

Gates Radiator Coolant Hose 20940 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 10
Inside Diameter 1 : 1.25
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet Tracker Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 Base, Delux, Lux, LSi Cut to fit - Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	Base, Delux, Lux, LSi	Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21532

2000 Chevrolet Tracker Radiator Coolant Hose ZO 21532

Gates Radiator Coolant Hose 21532 - Lower - Pipe-1 To Pipe-2

Position: Lower - Pipe-1 To Pipe-2

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 11.6
Inside Diameter 1 : 1.25
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet Tracker Engines.
Engine Sub Model Notes Fit Notes Position
1.6L L4 Base, LSi Cut to fit - Molded Coolant Hose Fuel Type: GAS Lower - Pipe-1 To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.6L L4	Base, LSi	Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Lower - Pipe-1 To Pipe-2

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21591

2000 Chevrolet Tracker Radiator Coolant Hose ZO 21591

Gates Radiator Coolant Hose 21591 - Lower - Pipe-2 To Radiator

Position: Lower - Pipe-2 To Radiator

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 14.3
Inside Diameter 1 : 1.19
Inside Diameter 2 : 1.3
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet Tracker Engines.
Engine Sub Model Notes Fit Notes Position
1.6L L4 Base, LSi Cut to fit - Molded Coolant Hose Fuel Type: GAS Lower - Pipe-2 To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.6L L4	Base, LSi	Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Lower - Pipe-2 To Radiator

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21398

2000 Chevrolet Tracker Radiator Coolant Hose ZO 21398

Gates Radiator Coolant Hose 21398 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 13.6
Inside Diameter 1 : 1.38
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet Tracker Engines.
Engine Sub Model Notes Fit Notes Position
1.6L L4 Base, LSi Cut to fit - Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.6L L4	Base, LSi	Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71588

2000 Chevrolet Tracker Radiator Coolant Hose DY 71588

Dayco Radiator Coolant Hose 71588 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15
End 1 Inside Diameter : 1 5/16
End 2 Inside Diameter : 1 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet Tracker Engines.
Engine Sub Model Notes Position
2.0L L4 Base, LSi Curved Radiator Hose Lower

Engine	Sub Model	Notes	Position
2.0L L4	Base, LSi	Curved Radiator Hose	Lower

Part Interchange

ACDelco	24294L
ACDelco	24355L
CARQUEST	22269
CARQUEST	22046
Duralast	C71588
Freshstart	62654
Gates	22046
Gates	22269
General Motors	30020689
General Motors	22548322
General Motors	10256242
General Motors	10261148
Goodyear	62654
Goodyear	62055
NAPA	8729
NAPA	9618
Suzuki	17851-65D10
Suzuki	17851-77EA0

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22269

2000 Chevrolet Tracker Radiator Coolant Hose ZO 22269

Gates Radiator Coolant Hose 22269 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 18.2
Inside Diameter 1 : 1.3
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet Tracker Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 Base, Delux, Lux, LSi Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2000 Chevrolet Tracker Radiator Coolant Hose

Dayco Radiator Coolant Hose 70846 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 70988 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 20940 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21532 - Lower - Pipe-1 To Pipe-2

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21591 - Lower - Pipe-2 To Radiator

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21398 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71588 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22269 - Lower

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

My Vehicle:

2000 Chevrolet Tracker Radiator Coolant Hose

Dayco Radiator Coolant Hose 70846 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 70988 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 20940 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21532 - Lower - Pipe-1 To Pipe-2

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21591 - Lower - Pipe-2 To Radiator

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21398 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71588 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22269 - Lower

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X