2001 Chrysler Sebring HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 19279

Gates HVAC Heater Hose 19279 - Heater To Pipe-1, Heater To Pipe-2

Position: Heater To Pipe-1, Heater To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10.8
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Chrysler Sebring Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 LX, LXi Molded Heater Hose Fuel Type: GAS Heater To Pipe-1, Heater To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	LX, LXi	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1, Heater To Pipe-2

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87817

2001 Chrysler Sebring HVAC Heater Hose DY 87817

Dayco HVAC Heater Hose 87817 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 13 1/2
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2001 Chrysler Sebring Engines.
Engine Sub Model Notes Position
2.4L L4 LX Small I.D. Heater Hose Heater Outlet
Part Interchange
ACDelco 16232M
CARQUEST 19214
Duralast E87817
Gates 19214
Mitsubishi MR439545
NAPA 11214
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.4L L4	LX	Small I.D. Heater Hose	Heater Outlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87675

2001 Chrysler Sebring HVAC Heater Hose DY 87675

Dayco HVAC Heater Hose 87675 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2001 Chrysler Sebring Engines.
Engine Sub Model Notes Position
2.7L V6 LX, LXi, LXi Limited Small I.D. Heater Hose Heater To Pipe

Engine	Sub Model	Notes	Position
2.7L V6	LX, LXi, LXi Limited	Small I.D. Heater Hose	Heater To Pipe

Part Interchange

ACDelco	14245S
ACDelco	14122S
CARQUEST	19183
CARQUEST	18821
Chrysler	05005373AB
Chrysler	05005373AC
Chrysler	04596703AB
Duralast	C87675
Ford	F77Z-18472-KB
Ford	1R3H-18K580-C
Freshstart	4395
Gates	19183
Gates	18821
General Motors	10135306
General Motors	25525788
Goodyear	63124
NAPA	10821
NAPA	11183
Toyota	97209-0R040
Toyota	87245-42420
V&W	303675

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19214

2001 Chrysler Sebring HVAC Heater Hose ZO 19214

Gates HVAC Heater Hose 19214 - Heater Outlet

Position: Heater Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 18
Inside Diameter 1 : .61
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Chrysler Sebring Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 LX Molded Heater Hose Cylinder Head Type: SOHC - Fuel Type: GAS Heater Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	LX	Molded Heater Hose	Cylinder Head Type: SOHC - Fuel Type: GAS	Heater Outlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87810

2001 Chrysler Sebring HVAC Heater Hose DY 87810

Dayco HVAC Heater Hose 87810 - Pipe To Thermostat

Position: Pipe To Thermostat

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 10 1/2
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2001 Chrysler Sebring Engines.
Engine Sub Model Notes Position
2.4L L4 LX Small I.D. Heater Hose Pipe To Thermostat
Part Interchange
ACDelco 14460S
CARQUEST 19443
Chrysler 4596711AC
Chrysler 4596711AD
Chrysler 4596711AB
Chrysler 459611AB
Duralast C87810
Gates 19443
NAPA 11443
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.4L L4	LX	Small I.D. Heater Hose	Pipe To Thermostat

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87811

2001 Chrysler Sebring HVAC Heater Hose DY 87811

Dayco HVAC Heater Hose 87811 - Pipe To Pipe, Pipe To Water Pump

Position: Pipe To Pipe, Pipe To Water Pump

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15 1/2
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2001 Chrysler Sebring Engines.
Engine Sub Model Notes Position
2.4L L4 LX Small I.D. Heater Hose Pipe To Pipe
2.7L V6 LX, LXi, LXi Limited Cut to Fit - Small I.D. Heater Hose Pipe To Water Pump
Part Interchange
ACDelco 16549M
ACDelco 14459S
CARQUEST 18095
Chrysler 4596741AC
Chrysler 4596712AB
Duralast E87811
Gates 18095
Gates 19442
NAPA 11442
NAPA 10095
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.4L L4	LX	Small I.D. Heater Hose	Pipe To Pipe
2.7L V6	LX, LXi, LXi Limited	Cut to Fit - Small I.D. Heater Hose	Pipe To Water Pump

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87606

2001 Chrysler Sebring HVAC Heater Hose DY 87606

Dayco HVAC Heater Hose 87606 - Heater To Engine

Position: Heater To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 25
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2001 Chrysler Sebring Engines.
Engine Sub Model Notes Position
2.7L V6 LX, LXi, LXi Limited Small I.D. Heater Hose Heater To Engine

Engine	Sub Model	Notes	Position
2.7L V6	LX, LXi, LXi Limited	Small I.D. Heater Hose	Heater To Engine

Part Interchange

ACDelco	18002L
ACDelco	18251L
ACDelco	16386M
CARQUEST	18073
Chrysler	04596713AA
Chrysler	4432319
Datsun/Nissan	92410-4Z700
Duralast	E87606
Ford	98AB-18K359-KE
Gates	19393
Gates	19121
Gates	18073
General Motors	10415188
General Motors	10333865
General Motors	22704432
General Motors	10427568
General Motors	22627220
NAPA	11393
NAPA	10073
NAPA	11121
V&W	303606

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87855

2001 Chrysler Sebring HVAC Heater Hose DY 87855

Dayco HVAC Heater Hose 87855 - Reservoir To Pipe

Position: Reservoir To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 15/16
End 2 Inside Diameter : 3/4
End 2 Outside Diameter : 1 1/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2001 Chrysler Sebring Engines.
Engine Sub Model Notes Position
2.7L V6 LX, LXi, LXi Limited Cut to Fit - Small I.D. Heater Hose Reservoir To Pipe
Part Interchange
ACDelco 14458S
ACDelco 14150S
CARQUEST 19019
Chrysler 4596716AC
Duralast B87855
Gates 19441
Gates 19019
Goodyear 64325
NAPA 11441
NAPA 11019
Toyota 87245-35100
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.7L V6	LX, LXi, LXi Limited	Cut to Fit - Small I.D. Heater Hose	Reservoir To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87988

2001 Chrysler Sebring HVAC Heater Hose DY 87988

Dayco HVAC Heater Hose 87988 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 5
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 31/32
End 2 Inside Diameter : 3/4
End 2 Outside Diameter : 1 3/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2001 Chrysler Sebring Engines.
Engine Sub Model Notes Position
2.4L L4 LX Small I.D. Heater Hose Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.4L L4	LX	Small I.D. Heater Hose	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19443

2001 Chrysler Sebring HVAC Heater Hose ZO 19443

Gates HVAC Heater Hose 19443 - Pipe-1 To Engine

Position: Pipe-1 To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 16.1
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Chrysler Sebring Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 LX Molded Heater Hose Cylinder Head Type: DOHC - Fuel Type: GAS Pipe-1 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	LX	Molded Heater Hose	Cylinder Head Type: DOHC - Fuel Type: GAS	Pipe-1 To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18095

2001 Chrysler Sebring HVAC Heater Hose ZO 18095

Gates HVAC Heater Hose 18095 - Pipe-2 To Engine

Position: Pipe-2 To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 24.4
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Chrysler Sebring Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 LX Molded Heater Hose Cylinder Head Type: DOHC - Fuel Type: GAS Pipe-2 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	LX	Molded Heater Hose	Cylinder Head Type: DOHC - Fuel Type: GAS	Pipe-2 To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87816

2001 Chrysler Sebring HVAC Heater Hose DY 87816

Dayco HVAC Heater Hose 87816 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12 1/2
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2001 Chrysler Sebring Engines.
Engine Sub Model Notes Position
2.4L L4 LX Small I.D. Heater Hose Heater Inlet
Part Interchange
ACDelco 16094M
Duralast D87816
Gates 18898
Mitsubishi MR439545
NAPA 10898
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.4L L4	LX	Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87661

2001 Chrysler Sebring HVAC Heater Hose DY 87661

Dayco HVAC Heater Hose 87661 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2001 Chrysler Sebring Engines.
Engine Sub Model Notes Position
3.0L V6 LX, LXi Right - Small I.D. Heater Hose Heater To Pipe

Engine	Sub Model	Notes	Position
3.0L V6	LX, LXi	Right - Small I.D. Heater Hose	Heater To Pipe

Part Interchange

ACDelco	14316S
ACDelco	14106S
ACDelco	14368S
ACDelco	14426S
CARQUEST	18799
CARQUEST	19088
CARQUEST	19279
CARQUEST	19376
Chrysler	05005375AB
Chrysler	05005370AC
Chrysler	05505375AB
Duralast	B87661
Gates	19376
Gates	19279
Gates	18799
Gates	19088
General Motors	25668357
General Motors	25681952
General Motors	25668354
General Motors	15755548
Goodyear	64314
NAPA	10799
NAPA	11088
NAPA	11279
NAPA	11151
V&W	303661

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19441

2001 Chrysler Sebring HVAC Heater Hose ZO 19441

Gates HVAC Heater Hose 19441 - Reservoir To Pipe-2

Position: Reservoir To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6.6
Inside Diameter 1 : .63
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Chrysler Sebring Engines.
Engine Sub Model Notes Fit Notes Position
2.7L V6 LX, LXi, LXi Limited Molded Heater Hose Fuel Type: GAS Reservoir To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L V6	LX, LXi, LXi Limited	Molded Heater Hose	Fuel Type: GAS	Reservoir To Pipe-2

Part Name: HVAC Heater HoseBrand: DaycoPart#: 71231

2001 Chrysler Sebring HVAC Heater Hose DY 71231

Dayco HVAC Heater Hose 71231 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6 1/2
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2001 Chrysler Sebring Engines.
Engine Sub Model Notes Position
2.4L L4 LX Cut to Fit - Curved Radiator Hose Heater To Pipe-2

Engine	Sub Model	Notes	Position
2.4L L4	LX	Cut to Fit - Curved Radiator Hose	Heater To Pipe-2

Part Interchange

ACDelco	14267S
ACDelco	14232S
Atlas	642220
CARQUEST	19173
CARQUEST	21757
Chrysler	MD009016
Chrysler	4596703AB
Duralast	B71231
Freshstart	3026
Gates	21757
Gates	19173
General Motors	12600099
General Motors	15781525
General Motors	15839134
General Motors	25800641
Goodyear	63026
Mazda	AM15-15-261
Mazda	AM15-15-561
Mitsubishi	25472-21000
Mopar	H0063026
NAPA	11173
NAPA	8424

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18568

2001 Chrysler Sebring HVAC Heater Hose ZO 18568

Gates HVAC Heater Hose 18568 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Chrysler Sebring Engines.
Engine Sub Model Notes Fit Notes Position
2.7L V6 LX, LXi, LXi Limited Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L V6	LX, LXi, LXi Limited	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19444

2001 Chrysler Sebring HVAC Heater Hose ZO 19444

Gates HVAC Heater Hose 19444 - Heater To Pipe-1, Heater To Pipe-2

Position: Heater To Pipe-1, Heater To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.7
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Chrysler Sebring Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 LX Molded Heater Hose Cylinder Head Type: DOHC - Fuel Type: GAS Heater To Pipe-1, Heater To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	LX	Molded Heater Hose	Cylinder Head Type: DOHC - Fuel Type: GAS	Heater To Pipe-1, Heater To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 19442

2001 Chrysler Sebring HVAC Heater Hose ZO 19442

Gates HVAC Heater Hose 19442 - Pipe-2 To Engine

Position: Pipe-2 To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20.2
Inside Diameter 1 : .62
Inside Diameter 2 : .68
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Chrysler Sebring Engines.
Engine Sub Model Notes Fit Notes Position
2.7L V6 LX, LXi, LXi Limited Molded Heater Hose Fuel Type: GAS Pipe-2 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L V6	LX, LXi, LXi Limited	Molded Heater Hose	Fuel Type: GAS	Pipe-2 To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18898

2001 Chrysler Sebring HVAC Heater Hose ZO 18898

Gates HVAC Heater Hose 18898 - Heater Inlet

Position: Heater Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 22
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Chrysler Sebring Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 LX Molded Heater Hose Cylinder Head Type: SOHC - Fuel Type: GAS Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	16232M
CARQUEST	19214
Duralast	E87817
Gates	19214
Mitsubishi	MR439545
NAPA	11214

ACDelco	14460S
CARQUEST	19443
Chrysler	4596711AC
Chrysler	4596711AD
Chrysler	4596711AB
Chrysler	459611AB
Duralast	C87810
Gates	19443
NAPA	11443

ACDelco	16549M
ACDelco	14459S
CARQUEST	18095
Chrysler	4596741AC
Chrysler	4596712AB
Duralast	E87811
Gates	18095
Gates	19442
NAPA	11442
NAPA	10095

ACDelco	14458S
ACDelco	14150S
CARQUEST	19019
Chrysler	4596716AC
Duralast	B87855
Gates	19441
Gates	19019
Goodyear	64325
NAPA	11441
NAPA	11019
Toyota	87245-35100

ACDelco	16094M
Duralast	D87816
Gates	18898
Mitsubishi	MR439545
NAPA	10898

My Vehicle:

2001 Chrysler Sebring HVAC Heater Hose

Gates HVAC Heater Hose 19279 - Heater To Pipe-1, Heater To Pipe-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87817 - Heater Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87675 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19214 - Heater Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87810 - Pipe To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87811 - Pipe To Pipe, Pipe To Water Pump

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87606 - Heater To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87855 - Reservoir To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87988 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19443 - Pipe-1 To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18095 - Pipe-2 To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87816 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87661 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19441 - Reservoir To Pipe-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 71231 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18568 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19444 - Heater To Pipe-1, Heater To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19442 - Pipe-2 To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18898 - Heater Inlet

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?