2010 Dodge Journey HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87867

Dayco HVAC Heater Hose 87867 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 16 1/2
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2010 Dodge Journey Engines.
Engine Sub Model Notes Position
2.4L L4 Base, SE, SXT Cut to Fit - Top Hose - Small I.D. Heater Hose Heater Inlet
Part Interchange
ACDelco 18229L
CARQUEST 19138
Duralast E87867
Gates 19138
Goodyear 87867
Honda 79721-TK8-A00
Honda 79725-SV4-000
NAPA 11138
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.4L L4	Base, SE, SXT	Cut to Fit - Top Hose - Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 12053

2010 Dodge Journey HVAC Heater Hose ZO 12053

Gates HVAC Heater Hose 12053 - Heater Outlet

Position: Heater Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.2
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2010 Dodge Journey Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, SE, SXT W/O Rear Heater - Molded Heater Hose Fuel Type: GAS Heater Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, SE, SXT	W/O Rear Heater - Molded Heater Hose	Fuel Type: GAS	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 12052

2010 Dodge Journey HVAC Heater Hose ZO 12052

Gates HVAC Heater Hose 12052 - Heater Inlet

Position: Heater Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.1
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2010 Dodge Journey Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, SE, SXT W/O Rear Heater - Molded Heater Hose Fuel Type: GAS Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, SE, SXT	W/O Rear Heater - Molded Heater Hose	Fuel Type: GAS	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 12057

2010 Dodge Journey HVAC Heater Hose ZO 12057

Gates HVAC Heater Hose 12057 - Oil Cooler To Pipe

Position: Oil Cooler To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13
Inside Diameter 1 : .59
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2010 Dodge Journey Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Crew, R/T, SXT, SXT Premium Molded Heater Hose Fuel Type: GAS Oil Cooler To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Crew, R/T, SXT, SXT Premium	Molded Heater Hose	Fuel Type: GAS	Oil Cooler To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 12048

2010 Dodge Journey HVAC Heater Hose ZO 12048

Gates HVAC Heater Hose 12048 - Engine To Oil Cooler

Position: Engine To Oil Cooler

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 8
Inside Diameter 1 : .59
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2010 Dodge Journey Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Crew, R/T, SXT, SXT Premium Molded Heater Hose Fuel Type: GAS Engine To Oil Cooler
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2010 Dodge Journey HVAC Heater Hose

Dayco HVAC Heater Hose 87867 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12053 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12052 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12057 - Oil Cooler To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12048 - Engine To Oil Cooler

Description:

Part Specifications:

Features:

Related HVAC Parts

ACDelco	18229L
CARQUEST	19138
Duralast	E87867
Gates	19138
Goodyear	87867
Honda	79721-TK8-A00
Honda	79725-SV4-000
NAPA	11138

My Vehicle:

2010 Dodge Journey HVAC Heater Hose

Dayco HVAC Heater Hose 87867 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12053 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12052 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12057 - Oil Cooler To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12048 - Engine To Oil Cooler

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X