1991 Ford Ranger HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87682

Dayco HVAC Heater Hose 87682 - Tee To Thermostat

Position: Tee To Thermostat

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1991 Ford Ranger Engines.
Engine Sub Model Notes Position
2.3L L4 Custom, S, Sport, STX, XLT Small I.D. Heater Hose Tee To Thermostat
Part Interchange
ACDelco 16073M
CARQUEST 18838
Duralast D87682
Ford E7TZ-18472-B
Freshstart 4357
Gates 18838
Goodyear 63094
NAPA 10838
V&W 303682
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.3L L4	Custom, S, Sport, STX, XLT	Small I.D. Heater Hose	Tee To Thermostat

Part Name: HVAC Heater HoseBrand: GatesPart#: 18916

1991 Ford Ranger HVAC Heater Hose ZO 18916

Gates HVAC Heater Hose 18916 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 36.6
Inside Diameter 1 : .6
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1991 Ford Ranger Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 Custom, S, Sport, STX, XLT Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	Custom, S, Sport, STX, XLT	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87615

1991 Ford Ranger HVAC Heater Hose DY 87615

Dayco HVAC Heater Hose 87615 - Thermostat To Heater

Position: Thermostat To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 36
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1991 Ford Ranger Engines.
Engine Sub Model Notes Position
3.0L V6 Custom, S, Sport, STX, XLT Small I.D. Heater Hose Thermostat To Heater

Engine	Sub Model	Notes	Position
3.0L V6	Custom, S, Sport, STX, XLT	Small I.D. Heater Hose	Thermostat To Heater

Part Interchange

ACDelco	18009L
ACDelco	16619M
CARQUEST	18083
CARQUEST	18645
Chrysler	3848726
Duralast	E87615
Ford	F17H-18K580-AB
Freshstart	4389
Gates	18083
Gates	18645
General Motors	25880388
Goodyear	63118
Honda	79725-TA1-A00
NAPA	10645
NAPA	10083
V&W	303615

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87715

1991 Ford Ranger HVAC Heater Hose DY 87715

Dayco HVAC Heater Hose 87715 - Heater To Water Pump

Position: Heater To Water Pump

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 14 1/4
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1991 Ford Ranger Engines.
Engine Sub Model Notes Position
4.0L V6 Custom, S, Sport, STX, XLT Small I.D. Heater Hose Heater To Water Pump
Part Interchange
ACDelco 18070L
CARQUEST 18906
Duralast E87715
Ford F0TZ-18472-A
Freshstart 4447
Gates 18906
Goodyear 63174
NAPA 10906
V&W 303715
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.0L V6	Custom, S, Sport, STX, XLT	Small I.D. Heater Hose	Heater To Water Pump

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87684

1991 Ford Ranger HVAC Heater Hose DY 87684

Dayco HVAC Heater Hose 87684 - Heater To Thermostat

Position: Heater To Thermostat

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 19
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1991 Ford Ranger Engines.
Engine Sub Model Notes Position
4.0L V6 Custom, S, Sport, STX, XLT Small I.D. Heater Hose Heater To Thermostat

Engine	Sub Model	Notes	Position
4.0L V6	Custom, S, Sport, STX, XLT	Small I.D. Heater Hose	Heater To Thermostat

Part Interchange

ACDelco	18104L
ACDelco	18045L
ACDelco	18409L
CARQUEST	18840
CARQUEST	19575
CARQUEST	19045
Chrysler	55057236AC
Duralast	E87684
Freshstart	4448
Gates	19516
Gates	19575
Gates	19045
Gates	18840
Goodyear	63175
Honda	79725S84A00
Honda	79721-TA0-A01
Mazda	ZZL015184
NAPA	11045
NAPA	11575
NAPA	11516
NAPA	10840
NAPA	18390L
V&W	303684

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80405

1991 Ford Ranger HVAC Heater Hose DY 80405

Dayco HVAC Heater Hose 80405 - Heater Hose

Position: Heater Hose

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 36
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 1991 Ford Ranger Engines.
Engine Sub Model Notes Position
2.3L L4 Custom, S, Sport, STX, XLT 90? Molded Coolant Hose Heater Hose

Engine	Sub Model	Notes	Position
2.3L L4	Custom, S, Sport, STX, XLT	90? Molded Coolant Hose	Heater Hose

Part Interchange

ACDelco	16420M
ACDelco	18152L
Atlas	MH-65
CARQUEST	19459
CARQUEST	28471
Chrysler	4462406
Chrysler	5264133
Chrysler	4361127
Chrysler	55037326
Chrysler	4462087
Chrysler	1595160
Duralast	E80405
Ford	F57H-18472-CA
Freshstart	4106
Gates	19459
Gates	28471
General Motors	15545960
General Motors	55036491
Goodyear	63836
Mazda	GK3J-61-24YF
Mazda	GK3J-61-24YG
Mazda	3K3J-61-24YF
Mazda	GK3J-61-24YK
NAPA	9812
NAPA	11459
Pirelli	43836
Toyota	87245-3D490
Toyota	87209-04030

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18083

1991 Ford Ranger HVAC Heater Hose ZO 18083

Gates HVAC Heater Hose 18083 - Heater To Thermostat

Position: Heater To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 36
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1991 Ford Ranger Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Custom, S, Sport, STX, XLT Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Custom, S, Sport, STX, XLT	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Thermostat

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87776

1991 Ford Ranger HVAC Heater Hose DY 87776

Dayco HVAC Heater Hose 87776 - Heater To Water Pump

Position: Heater To Water Pump

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 39
End 1 Inside Diameter : 19/32
End 2 Inside Diameter : 1
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 1991 Ford Ranger Engines.
Engine Sub Model Notes Position
3.0L V6 Custom, S, Sport, STX, XLT Small I.D. Heater Hose Heater To Water Pump
Part Interchange
ACDelco 18081L
CARQUEST 18965
Duralast E87776
Ford F37Z-18472-A
Ford F37H-18C266-AC
Gates 18965
NAPA 10965
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L V6	Custom, S, Sport, STX, XLT	Small I.D. Heater Hose	Heater To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 18906

1991 Ford Ranger HVAC Heater Hose ZO 18906

Gates HVAC Heater Hose 18906 - Heater To Water Pump

Position: Heater To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 39.8
Inside Diameter 1 : .6
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1991 Ford Ranger Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.9L V6	Custom, S, Sport, STX, XLT	Molded Heater Hose	Fuel Type: GAS	Heater To Water Pump
4.0L V6	Custom, S, Sport, STX, XLT	Molded Heater Hose	Fuel Type: GAS	Heater To Water Pump

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18840

1991 Ford Ranger HVAC Heater Hose ZO 18840

Gates HVAC Heater Hose 18840 - Heater To Thermostat

Position: Heater To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 30.5
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1991 Ford Ranger Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 Custom, S, Sport, STX, XLT Molded Heater Hose Fuel Type: GAS Heater To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.0L V6	Custom, S, Sport, STX, XLT	Molded Heater Hose	Fuel Type: GAS	Heater To Thermostat

Part Name: HVAC Heater HoseBrand: GatesPart#: 18965

1991 Ford Ranger HVAC Heater Hose ZO 18965

Gates HVAC Heater Hose 18965 - Heater To Water Pump

Position: Heater To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 35
Inside Diameter 1 : .62
Inside Diameter 2 : 1
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1991 Ford Ranger Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Custom, S, Sport, STX, XLT Molded Heater Hose Fuel Type: GAS Heater To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Custom, S, Sport, STX, XLT	Molded Heater Hose	Fuel Type: GAS	Heater To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

1991 Ford Ranger HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Heater To Tee, Heater To Thermostat

Position: Heater To Tee, Heater To Thermostat

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1991 Ford Ranger Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	Custom, S, Sport, STX, XLT	Cut to Length, 22" - Straight Heater Hose (Standard)	Fuel Type: GAS	Heater To Tee
2.9L V6	Custom, S, Sport, STX, XLT	Cut to Length, 32" - Straight Heater Hose (Standard)	Fuel Type: GAS	Heater To Thermostat

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	16073M
CARQUEST	18838
Duralast	D87682
Ford	E7TZ-18472-B
Freshstart	4357
Gates	18838
Goodyear	63094
NAPA	10838
V&W	303682

ACDelco	18070L
CARQUEST	18906
Duralast	E87715
Ford	F0TZ-18472-A
Freshstart	4447
Gates	18906
Goodyear	63174
NAPA	10906
V&W	303715

ACDelco	18081L
CARQUEST	18965
Duralast	E87776
Ford	F37Z-18472-A
Ford	F37H-18C266-AC
Gates	18965
NAPA	10965

My Vehicle:

1991 Ford Ranger HVAC Heater Hose

Dayco HVAC Heater Hose 87682 - Tee To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18916 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87615 - Thermostat To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87715 - Heater To Water Pump

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87684 - Heater To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80405 - Heater Hose

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18083 - Heater To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87776 - Heater To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18906 - Heater To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18840 - Heater To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18965 - Heater To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Heater To Tee, Heater To Thermostat

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X