631-302-9490

8AM To 6PM (EST)
Monday to Friday

My Vehicle:

Search Filter:
Engine
    x
  • Check All Engines
  • 2.3L L4
  • 4.0L V6
  • Uncheck All Engine(s)
Brand
    x
  • Check All Brands
  • Dayco
  • Gates
  • Uncheck All Brand(s)
Position
    x
  • Check All Positions
  • Heater - Left Side
  • Heater To Pipe-2
  • Left
  • Pipe to Engine (Inlet)
  • Pipe-1 To Engine
  • Pipe-2 To Water Pump
  • Valve To Heater
  • Valve To Pipe
  • Uncheck All Position(s)

2011 Ford Ranger HVAC Heater Hose

We have found 8 HVAC Heater Hose for
2011 Ford Ranger 2011 Ford Ranger
Part Name: HVAC Heater HoseBrand: DaycoPart#: 87830
2011 Ford Ranger HVAC Heater Hose DY 87830

Dayco HVAC Heater Hose 87830 - Left

DY
Left

Description:

  • MOLDED HEATER HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 7
  • End 1 Inside Diameter : 5/8
  • End 2 Inside Diameter : 5/8
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC
  • See more

Features:

  • Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
New
$5.36
2
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
Part Name: HVAC Heater HoseBrand: DaycoPart#: 87837
2011 Ford Ranger HVAC Heater Hose DY 87837

Dayco HVAC Heater Hose 87837 - Valve To Heater

DY
Valve To Heater

Description:

  • MOLDED HEATER HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 10
  • End 1 Inside Diameter : 5/8
  • End 2 Inside Diameter : 5/8
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC
  • See more

Features:

  • Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
New
$6.37
4
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
Part Name: HVAC Heater HoseBrand: DaycoPart#: 87831
2011 Ford Ranger HVAC Heater Hose DY 87831

Dayco HVAC Heater Hose 87831 - Valve To Pipe

DY
Valve To Pipe

Description:

  • MOLDED HEATER HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 4
  • End 1 Inside Diameter : 5/8
  • End 2 Inside Diameter : 5/8
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC
  • See more

Features:

  • Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
New
$7.93
1
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
Part Name: HVAC Heater HoseBrand: GatesPart#: 19140
2011 Ford Ranger HVAC Heater Hose ZO 19140
2011 Ford Ranger HVAC Heater Hose ZO 19140

Gates HVAC Heater Hose 19140 - Heater - Left Side

ZO
Heater - Left Side

Description:

  • Molded Heater Hose

Part Specifications:

  • Centerline Length : 13.7
  • Inside Diameter 1 : .63
  • Number of Branches : 0

Features:

  • Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

    • Similar to OEM specifications.
    • Has all the quality features of Gates Molded Coolant Hose.
    • Engineered to resist electrochemical degradation - the leading cause of hose failure.
    • Inside diameters range from 1/4 to 1 .
    • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

    Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.

    Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

    Gates - Powering Progress

New
$10.31
70
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
Part Name: HVAC Heater HoseBrand: GatesPart#: 28474
2011 Ford Ranger HVAC Heater Hose ZO 28474
2011 Ford Ranger HVAC Heater Hose ZO 28474

Gates HVAC Heater Hose 28474 - Pipe-1 To Engine

ZO
Pipe-1 To Engine

Description:

  • 90 Deg Molded Heater Hose

Part Specifications:

  • Centerline Length : 10
  • Arm Length 1 : 4
  • Arm Length 1 : 101.6
  • Arm Length 2 : 6
  • Arm Length 2 : 152.4
  • Inside Diameter 1 : .75
  • Angle : 90
  • See more

Features:

  • Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.

    • Engineered to resist electrochemical degradation the leading cause of hose failure.
    • Resists water permeation.
    • Similar to heater SAE 20R3 Type EC Class D-2.
    • Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
    • Temperature Rating: -40F to 275F (-40C to 135C).

    Caution: Do not use for fuel or oil transfer applications.

    Gates Powering Progress

2
New
$10.45
263
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
Part Name: HVAC Heater HoseBrand: DaycoPart#: 87734
2011 Ford Ranger HVAC Heater Hose DY 87734

Dayco HVAC Heater Hose 87734 - Pipe to Engine (Inlet)

DY
Pipe to Engine (Inlet)

Description:

  • MOLDED HEATER HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 15
  • End 1 Inside Diameter : 19/32
  • End 2 Inside Diameter : 19/32
  • Contains Protective Sleeve : Y
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC
  • See more

Features:

  • Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.
New
$21.29
2
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
Part Name: HVAC Heater HoseBrand: GatesPart#: 19373
2011 Ford Ranger HVAC Heater Hose ZO 19373
2011 Ford Ranger HVAC Heater Hose ZO 19373

Gates HVAC Heater Hose 19373 - Pipe-2 To Water Pump

ZO
Pipe-2 To Water Pump

Description:

  • Molded Heater Hose

Part Specifications:

  • Centerline Length : 18.6
  • Inside Diameter 1 : .62
  • Number of Branches : 0

Features:

  • Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

    • Similar to OEM specifications.
    • Has all the quality features of Gates Molded Coolant Hose.
    • Engineered to resist electrochemical degradation - the leading cause of hose failure.
    • Inside diameters range from 1/4 to 1 .
    • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

    Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.

    Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

    Gates - Powering Progress

New
$28.99
34
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
Part Name: HVAC Heater HoseBrand: GatesPart#: 22949
2011 Ford Ranger HVAC Heater Hose ZO 22949
2011 Ford Ranger HVAC Heater Hose ZO 22949

Gates HVAC Heater Hose 22949 - Heater To Pipe-2

ZO
Heater To Pipe-2

Description:

  • Molded Coolant Hose

Part Specifications:

  • Centerline Length : 13.3
  • Number of Branches : 1
  • Inside Diameter 1 : .61
  • Inside Diameter 2 : .61
  • Inside Diameter 3 : .245
  • Contains Spring : No
  • See more

Features:

  • Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

    • Recommend for upper, lower, by-pass, heater and other coolant hose applications.
    • Heat and ozone resistant cover.
    • Engineered to resist electrochemical degradation - the leading cause of hose failure.
    • Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
    • Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.

    Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.

    Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

    Gates - Powering Progress

New
$64.89
55
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price