2009 Honda Accord HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18173

Gates HVAC Heater Hose 18173 - Housing To Pipe-1

Position: Housing To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7
Inside Diameter 1 : .29
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Honda Accord Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 EX, EX-L, LX, LX-P, LX-S Molded Heater Hose Fuel Type: GAS Housing To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	EX, EX-L, LX, LX-P, LX-S	Molded Heater Hose	Fuel Type: GAS	Housing To Pipe-1

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86503

2009 Honda Accord HVAC Heater Hose DY 86503

Dayco HVAC Heater Hose 86503 - Pipe To Throttle Body

Position: Pipe To Throttle Body

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 5
End 1 Inside Diameter : 9/32
End 2 Inside Diameter : 9/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2009 Honda Accord Engines.
Engine Sub Model Notes Position
3.5L V6 EX, EX-L Cut to Fit - Hose Must Be Cut On Both Ends - Small I.D. Heater Hose Pipe To Throttle Body

Engine	Sub Model	Notes	Position
3.5L V6	EX, EX-L	Cut to Fit - Hose Must Be Cut On Both Ends - Small I.D. Heater Hose	Pipe To Throttle Body

Part Interchange

ACDelco	14621S
ACDelco	14019S
ACDelco	14636S
CARQUEST	18191
CARQUEST	18201
CARQUEST	18176
Datsun/Nissan	14055-D4205
Datsun/Nissan	14055-12G02
Datsun/Nissan	14056-30R19
Duralast	B86503
Freshstart	4413
Gates	18191
Gates	18201
Gates	18176
General Motors	12595603
Goodyear	63142
Honda	19528-P8A-A00
Honda	19528-P07-A00
Honda	19522-P8A-A00
Honda	19522-R70-A00
NAPA	10191
NAPA	10201
NAPA	10176
V&W	302503

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87615

2009 Honda Accord HVAC Heater Hose DY 87615

Dayco HVAC Heater Hose 87615 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 36
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2009 Honda Accord Engines.
Engine Sub Model Notes Position
2.4L L4 EX, EX-L, LX, LX-P, LX-S Small I.D. Heater Hose Heater Outlet
3.5L V6 EX, EX-L Small I.D. Heater Hose Heater Outlet

Engine	Sub Model	Notes	Position
2.4L L4	EX, EX-L, LX, LX-P, LX-S	Small I.D. Heater Hose	Heater Outlet
3.5L V6	EX, EX-L	Small I.D. Heater Hose	Heater Outlet

Part Interchange

ACDelco	18009L
ACDelco	16619M
CARQUEST	18083
CARQUEST	18645
Chrysler	3848726
Duralast	E87615
Ford	F17H-18K580-AB
Freshstart	4389
Gates	18083
Gates	18645
General Motors	25880388
Goodyear	63118
Honda	79725-TA1-A00
NAPA	10645
NAPA	10083
V&W	303615

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

2009 Honda Accord HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Water Housing To Pipe-1

Position: Water Housing To Pipe-1

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2009 Honda Accord Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 EX, EX-L Cut to fit - Straight Heater Hose (Standard) Fuel Type: GAS Water Housing To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2009 Honda Accord HVAC Heater Hose

Gates HVAC Heater Hose 18173 - Housing To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86503 - Pipe To Throttle Body

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87615 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Water Housing To Pipe-1

Description:

Part Specifications:

Features:

Related HVAC Parts

My Vehicle:

2009 Honda Accord HVAC Heater Hose

Gates HVAC Heater Hose 18173 - Housing To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86503 - Pipe To Throttle Body

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87615 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Water Housing To Pipe-1

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X