2006 Honda Civic HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18147

Gates HVAC Heater Hose 18147 - Filler Pipe To Radiator

Position: Filler Pipe To Radiator

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 4.2
Inside Diameter 1 : .92
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Honda Civic Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 DX, EX, EXS, GX, LX, LXS Molded Heater Hose Fuel Type: CNG, GAS Filler Pipe To Radiator
2.0L L4 Si Molded Heater Hose Fuel Type: GAS Filler Pipe To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	DX, EX, EXS, GX, LX, LXS	Molded Heater Hose	Fuel Type: CNG, GAS	Filler Pipe To Radiator
2.0L L4	Si	Molded Heater Hose	Fuel Type: GAS	Filler Pipe To Radiator

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87923

2006 Honda Civic HVAC Heater Hose DY 87923

Dayco HVAC Heater Hose 87923 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15 3/4
End 1 Inside Diameter : 21/32
End 1 Outside Diameter : 1 1/32
End 2 Inside Diameter : 21/32
End 2 Outside Diameter : 1 1/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Honda Civic Engines.
Engine Sub Model Notes Position
1.8L L4 DX, EX, EXS, GX, LX, LXS Bottom Hose - Small I.D. Heater Hose Heater Inlet
Part Interchange
ACDelco 16484M
ACDelco 16341M
CARQUEST 19552
CARQUEST 19311
Duralast E87923
Gates 19311
Gates 19552
Honda 79721-SNA-A00
Hyundai 97311-2C200
NAPA 11552
NAPA 11311
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
1.8L L4	DX, EX, EXS, GX, LX, LXS	Bottom Hose - Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19552

2006 Honda Civic HVAC Heater Hose ZO 19552

Gates HVAC Heater Hose 19552 - Heater Inlet

Position: Heater Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 19.4
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Honda Civic Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 DX, EX, EXS, GX, LX, LXS Molded Heater Hose Fuel Type: CNG, GAS Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	DX, EX, EXS, GX, LX, LXS	Molded Heater Hose	Fuel Type: CNG, GAS	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19550

2006 Honda Civic HVAC Heater Hose ZO 19550

Gates HVAC Heater Hose 19550 - Heater Outlet

Position: Heater Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 27.2
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Honda Civic Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 DX, EX, EXS, GX, LX, LXS Molded Heater Hose Fuel Type: CNG, GAS Heater Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	DX, EX, EXS, GX, LX, LXS	Molded Heater Hose	Fuel Type: CNG, GAS	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2006 Honda Civic HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Heater To Restrictor, Valve To Heater

Position: Heater To Restrictor, Valve To Heater

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2006 Honda Civic Engines.

Engine	Sub Model	Notes	Fit Notes	Position
1.3L L4	Hybrid	Cut to Length, 3 1/4" - Straight Heater Hose (Standard)	Fuel Type: ELECTRIC/GAS	Valve To Heater
2.0L L4	Si	Cut to Length, 3 1/4" - Straight Heater Hose (Standard)	Fuel Type: GAS	Heater To Restrictor

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2006 Honda Civic HVAC Heater Hose

Gates HVAC Heater Hose 18147 - Filler Pipe To Radiator

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87923 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19552 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19550 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Heater To Restrictor, Valve To Heater

Description:

Part Specifications:

Features:

Related HVAC Parts

ACDelco	16484M
ACDelco	16341M
CARQUEST	19552
CARQUEST	19311
Duralast	E87923
Gates	19311
Gates	19552
Honda	79721-SNA-A00
Hyundai	97311-2C200
NAPA	11552
NAPA	11311

My Vehicle:

2006 Honda Civic HVAC Heater Hose

Gates HVAC Heater Hose 18147 - Filler Pipe To Radiator

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87923 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19552 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19550 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Heater To Restrictor, Valve To Heater

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X