631-302-9490

8AM To 6PM (EST)
Monday to Friday

My Vehicle:

Search Filter:
Brand
    x
  • Check All Brands
  • Dayco
  • Gates
  • Uncheck All Brand(s)
Position
    x
  • Check All Positions
  • Auxiliary Heater Inlet
  • Auxiliary Heater Outlet
  • Heater To Tee
  • Pipe To Tee
  • Valve To Engine
  • Valve To Tee
  • Uncheck All Position(s)

2008 Honda Pilot HVAC Heater Hose

We have found 6 HVAC Heater Hose for
2008 Honda Pilot 2008 Honda Pilot
Part Name: HVAC Heater HoseBrand: DaycoPart#: 87746
2008 Honda Pilot HVAC Heater Hose DY 87746

Dayco HVAC Heater Hose 87746 - Valve To Engine

DY
Valve To Engine

Description:

  • MOLDED HEATER HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 6
  • End 1 Inside Diameter : 5/8
  • End 2 Inside Diameter : 5/8
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC
  • See more

Features:

  • Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
New
$4.44
6
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
Part Name: HVAC Heater HoseBrand: DaycoPart#: 87769
2008 Honda Pilot HVAC Heater Hose DY 87769

Dayco HVAC Heater Hose 87769 - Heater To Tee

DY
Heater To Tee

Description:

  • MOLDED HEATER HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 8
  • End 1 Inside Diameter : 5/8
  • End 2 Inside Diameter : 5/8
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC
  • See more

Features:

  • Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
New
$5.03
4
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
Part Name: HVAC Heater HoseBrand: DaycoPart#: 86104
2008 Honda Pilot HVAC Heater Hose DY 86104

Dayco HVAC Heater Hose 86104 - Valve To Tee

DY
Valve To Tee

Description:

  • MOLDED HEATER HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 9
  • End 1 Inside Diameter : 19/32
  • End 2 Inside Diameter : 19/32
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC
  • See more

Features:

  • Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
New
$10.55
1
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
Part Name: HVAC Heater HoseBrand: GatesPart#: 28466
2008 Honda Pilot HVAC Heater Hose ZO 28466
2008 Honda Pilot HVAC Heater Hose ZO 28466

Gates HVAC Heater Hose 28466 - Auxiliary Heater Outlet

ZO
Auxiliary Heater Outlet

Description:

  • 90 Deg Molded Heater Hose

Part Specifications:

  • Centerline Length : 10
  • Arm Length 1 : 4
  • Arm Length 1 : 101.6
  • Arm Length 2 : 6
  • Arm Length 2 : 152.4
  • Inside Diameter 1 : .625
  • Angle : 90
  • See more

Features:

  • Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.

    • Engineered to resist electrochemical degradation the leading cause of hose failure.
    • Resists water permeation.
    • Similar to heater SAE 20R3 Type EC Class D-2.
    • Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
    • Temperature Rating: -40F to 275F (-40C to 135C).

    Caution: Do not use for fuel or oil transfer applications.

    Gates Powering Progress

2
New
$13.48
242
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
Part Name: HVAC Heater HoseBrand: DaycoPart#: 88392
2008 Honda Pilot HVAC Heater Hose DY 88392

Dayco HVAC Heater Hose 88392 - Pipe To Tee

DY
Pipe To Tee

Description:

  • MOLDED HEATER HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 9 1/4
  • End 1 Inside Diameter : 3/4
  • End 2 Inside Diameter : 3/4
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC
  • See more

Features:

  • Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
New
$14.43
4
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
Part Name: HVAC Heater HoseBrand: GatesPart#: 21742
2008 Honda Pilot HVAC Heater Hose ZO 21742
2008 Honda Pilot HVAC Heater Hose ZO 21742

Gates HVAC Heater Hose 21742 - Auxiliary Heater Inlet

ZO
Auxiliary Heater Inlet

Description:

  • Molded Coolant Hose

Part Specifications:

  • Centerline Length : 4.8
  • Inside Diameter 1 : .62
  • Number of Branches : 0
  • Contains Spring : No

Features:

  • Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

    • Recommend for upper, lower, by-pass, heater and other coolant hose applications.
    • Heat and ozone resistant cover.
    • Engineered to resist electrochemical degradation - the leading cause of hose failure.
    • Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
    • Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.

    Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.

    Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

    Gates - Powering Progress

New
$14.55
30
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price