My Vehicle:

Search Filter:
Brand
    x
  • Check All
  • KYB
  • Monroe
  • Rancho
Position
    x
  • Check All
  • Front
  • Rear

2010 Jeep Wrangler Shock Absorber & Strut Assembly

We have found 21 Shock Absorber & Strut Assembly for
2010 Jeep Wrangler 2010 Jeep Wrangler
Part Name: Shock AbsorberBrand: MonroePart#: 911536
2010 Jeep Wrangler Shock Absorber & Strut Assembly TENNECO MONROE 911536

Monroe Shock Absorber 911536

TS

Description:

  • Monroe® Reflex® monotube shocks are specifically engineered to provide better handling, control and performance for light trucks and SUV's. These shocks feature a high-pressure gas charge that separates the unit internal oil and nitrogen to provide additional spring rate, helping to maximize damping efficiency and control. To further enhance ride control characteristics, Monroe® Reflex® monotube shocks include a hydraulic lockout to cushion the impact as the vehicle suspension is fully extended.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • High Pressure Nitrogen Gas Charged: High-pressure charge (240-260 PSI) provides a quicker response for excellent vehicle control
  • Hydraulic Lockout: Patented unique hydraulic lock-out isolates impact at the limits of suspension travel
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Free Floating Dividing Piston: Separates shock fluid from high-pressure gas charge.
  • Shock Housing: High strength to resist damage and provide longer service life.
  • Nitrocarburized Rod: For long service life
  • Monroe Reflex Monotube Shock Absorber

Additional Details:

  • Upper Mounting Code: Stem Mount - 2.3/8 Stem Length X 3/8-16 Thread Pitch
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 12MM Sleeve ID X 1.1/2 Sleeve OAL
  • Compressed Length: 14.020
  • Extended Length: 21.930
  • Travel Length: 7.910
  • Dust Shield: Yes
  • Parts Pack(s): P1136
  • Extended Hydraulic Lockout: No
  • Extended Bumper Stop: No
  • Compressed Bumper Stop: No
  • Dust Shield Material: Rubber
Front
2
New
048598098771
$43.60
$37.06
$6.54 (15%)
43
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
3.8L V6Sport- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty
3.8L V6Unlimited Sahara- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty
3.8L V6Unlimited Sport- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty
3.8L V6Sahara- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty
3.8L V6Unlimited Rubicon- Premium - Limited Lifetime Warranty
3.8L V6Rubicon- Premium - Limited Lifetime Warranty
Part Name: Shock AbsorberBrand: MonroePart#: 37286
2010 Jeep Wrangler Shock Absorber & Strut Assembly TENNECO MONROE 37286

Monroe Shock Absorber 37286

TS

Description:

  • The Monroe® Sensa-Trac® truck shock absorber with PSD (position sensitive damping) and the Safe Tech™ system combines our exclusive precision tapered grooves in the pressure tube with application engineered valving and Fluon banded piston to improve the ride, handling, and safety characteristics of the vehicle. These features allow the Monroe® Sensa-Trac® truck shock absorber to adjust more rapidly to changing road and weight conditions than any other available shock absorber.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
  • Unique Groove Tube - PSD: Precision tapered grooves in the pressure tube perform like an additional stage of valving for optimum ride tuning.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/8 inch Bore: Lower operating pressure than standard 1 inch bore units
  • Monroe Sensa-Trac Light Truck Shock Absorber

Additional Details:

  • Upper Mounting Code: Special Mount
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 12MM Sleeve ID X 1.1/2 Sleeve OAL
  • Compressed Length: 13.740
  • Extended Length: 21.850
  • Travel Length: 8.110
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
  • Dust Shield Material: Metal
Rear
2
New
048598003799
$44.74
$38.03
$6.71 (15%)
12
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
3.8L V6Unlimited Sahara- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
3.8L V6Unlimited X- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
3.8L V6Unlimited Sport- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: MonroePart#: 37287
2010 Jeep Wrangler Shock Absorber & Strut Assembly TENNECO MONROE 37287

Monroe Shock Absorber 37287

TS

Description:

  • The Monroe® Sensa-Trac® truck shock absorber with PSD (position sensitive damping) and the Safe Tech™ system combines our exclusive precision tapered grooves in the pressure tube with application engineered valving and Fluon banded piston to improve the ride, handling, and safety characteristics of the vehicle. These features allow the Monroe® Sensa-Trac® truck shock absorber to adjust more rapidly to changing road and weight conditions than any other available shock absorber.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
  • Unique Groove Tube - PSD: Precision tapered grooves in the pressure tube perform like an additional stage of valving for optimum ride tuning.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/8 inch Bore: Lower operating pressure than standard 1 inch bore units
  • Monroe Sensa-Trac Light Truck Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Open Ended, 5/16 Hole ID (Both Ends) X 2.3/4 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.1/2 Sleeve OAL
  • Compressed Length: 14.550
  • Extended Length: 23.000
  • Travel Length: 8.450
  • Dust Shield: Yes
  • Parts Pack(s): P1517
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
  • Dust Shield Material: Metal
Rear
2
New
048598006097
$45.35
$38.55
$6.80 (15%)
124
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
3.8L V6Sport- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
3.8L V6X- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
3.8L V6Unlimited Sahara- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
3.8L V6Unlimited X- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
3.8L V6Unlimited Sport- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
3.8L V6Mountain- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
3.8L V6Unlimited Islander- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
3.8L V6Unlimited Mountain- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
3.8L V6Islander- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
3.8L V6Sahara- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: KYBPart#: 349069
2010 Jeep Wrangler Shock Absorber & Strut Assembly KYB SHOCKS 349069

KYB Shock Absorber 349069

KY

Description:

  • Gas Shock

Additional Details:

  • Extended Length (in): 22.83
  • Compressed Length (in): 13.85
  • Stroke (in): 8.98
  • Cover: Yes
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: E3(68.5x95x0)
  • Lower Mount: E2(12.8x40)
Rear
2
New
781552585732
$46.19
$39.26
$6.93 (15%)
142
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
3.8L V6Islander- Recommended OE Replacement DRIVE TYPE: 4WD
3.8L V6Mountain- Recommended OE Replacement DRIVE TYPE: 4WD
3.8L V6Rubicon- Recommended OE Replacement DRIVE TYPE: 4WD
3.8L V6Sahara- Recommended OE Replacement DRIVE TYPE: 4WD
3.8L V6Sport- Recommended OE Replacement DRIVE TYPE: 4WD
3.8L V6Unlimited Islander- Recommended OE Replacement DRIVE TYPE: 4WD
3.8L V6Unlimited Mountain- Recommended OE Replacement DRIVE TYPE: 4WD
3.8L V6Unlimited Rubicon- Recommended OE Replacement DRIVE TYPE: 4WD
3.8L V6Unlimited Sahara- Recommended OE Replacement DRIVE TYPE: 4WD
3.8L V6Unlimited Sport- Recommended OE Replacement DRIVE TYPE: 4WD
3.8L V6Unlimited X- Recommended OE Replacement DRIVE TYPE: 4WD
3.8L V6X- Recommended OE Replacement DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: KYBPart#: 349071
2010 Jeep Wrangler Shock Absorber & Strut Assembly KYB SHOCKS 349071

KYB Shock Absorber 349071

KY

Description:

  • Gas Shock

Additional Details:

  • Extended Length (in): 21.81
  • Compressed Length (in): 13.22
  • Stroke (in): 8.59
  • Cover: Yes
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: S1
  • Lower Mount: E2(12.8x40)
Front
2
New
781552585770
$47.26
$40.17
$7.09 (15%)
130
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
3.8L V6Islander- Recommended OE Replacement DRIVE TYPE: RWD
3.8L V6Mountain- Recommended OE Replacement DRIVE TYPE: RWD
3.8L V6Rubicon- Recommended OE Replacement DRIVE TYPE: RWD
3.8L V6Sahara- Recommended OE Replacement DRIVE TYPE: RWD
3.8L V6Sport- Recommended OE Replacement DRIVE TYPE: RWD
3.8L V6Unlimited Islander- Recommended OE Replacement DRIVE TYPE: RWD
3.8L V6Unlimited Mountain- Recommended OE Replacement DRIVE TYPE: RWD
3.8L V6Unlimited Rubicon- Recommended OE Replacement DRIVE TYPE: RWD
3.8L V6Unlimited Sahara- Recommended OE Replacement DRIVE TYPE: RWD
3.8L V6Unlimited Sport- Recommended OE Replacement DRIVE TYPE: RWD
3.8L V6Unlimited X- Recommended OE Replacement DRIVE TYPE: RWD
3.8L V6X- Recommended OE Replacement DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: MonroePart#: 37285
2010 Jeep Wrangler Shock Absorber & Strut Assembly TENNECO MONROE 37285

Monroe Shock Absorber 37285

TS

Description:

  • The Monroe® Sensa-Trac® truck shock absorber with PSD (position sensitive damping) and the Safe Tech™ system combines our exclusive precision tapered grooves in the pressure tube with application engineered valving and Fluon banded piston to improve the ride, handling, and safety characteristics of the vehicle. These features allow the Monroe® Sensa-Trac® truck shock absorber to adjust more rapidly to changing road and weight conditions than any other available shock absorber.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
  • Unique Groove Tube - PSD: Precision tapered grooves in the pressure tube perform like an additional stage of valving for optimum ride tuning.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/8 inch Bore: Lower operating pressure than standard 1 inch bore units
  • Monroe Sensa-Trac Light Truck Shock Absorber

Additional Details:

  • Upper Mounting Code: Stem Mount - Stem Length X M10 Thread Pitch
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 12MM Sleeve ID X 1.1/2 Sleeve OAL
  • Compressed Length: 13.740
  • Extended Length: 21.850
  • Travel Length: 8.110
  • Dust Shield: Yes
  • Parts Pack(s): P1136
  • Cylinder Included: No
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
  • Dust Shield Material: Metal
Front
2
New
048598003782
$48.48
$41.21
$7.27 (15%)
105
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
3.8L V6Sport- Premium - Limited Lifetime Warranty
3.8L V6X- Premium - Limited Lifetime Warranty
3.8L V6Unlimited Sahara- Premium - Limited Lifetime Warranty
3.8L V6Unlimited X- Premium - Limited Lifetime Warranty
3.8L V6Unlimited Sport- Premium - Limited Lifetime Warranty
3.8L V6Mountain- Premium - Limited Lifetime Warranty
3.8L V6Unlimited Islander- Premium - Limited Lifetime Warranty
3.8L V6Unlimited Mountain- Premium - Limited Lifetime Warranty
3.8L V6Islander- Premium - Limited Lifetime Warranty
3.8L V6Sahara- Premium - Limited Lifetime Warranty
Part Name: Shock AbsorberBrand: MonroePart#: 911537
2010 Jeep Wrangler Shock Absorber & Strut Assembly TENNECO MONROE 911537

Monroe Shock Absorber 911537

TS

Description:

  • Monroe® Reflex® monotube shocks are specifically engineered to provide better handling, control and performance for light trucks and SUV's. These shocks feature a high-pressure gas charge that separates the unit internal oil and nitrogen to provide additional spring rate, helping to maximize damping efficiency and control. To further enhance ride control characteristics, Monroe® Reflex® monotube shocks include a hydraulic lockout to cushion the impact as the vehicle suspension is fully extended.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • High Pressure Nitrogen Gas Charged: High-pressure charge (240-260 PSI) provides a quicker response for excellent vehicle control
  • Hydraulic Lockout: Patented unique hydraulic lock-out isolates impact at the limits of suspension travel
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Free Floating Dividing Piston: Separates shock fluid from high-pressure gas charge.
  • Shock Housing: High strength to resist damage and provide longer service life.
  • Nitrocarburized Rod: For long service life
  • Monroe Reflex Monotube Shock Absorber

Additional Details:

  • Upper Mounting Code: Special Mount
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 12MM Sleeve ID X 1.1/2 Sleeve OAL
  • Compressed Length: 14.690
  • Extended Length: 21.340
  • Travel Length: 6.650
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Extended Hydraulic Lockout: No
  • Extended Bumper Stop: No
  • Compressed Bumper Stop: No
  • Dust Shield Material: Rubber
Rear
2
New
048598098788
$50.95
$43.31
$7.64 (15%)
1
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
3.8L V6Unlimited Sahara- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
3.8L V6Unlimited X- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
3.8L V6Unlimited Sport- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: MonroePart#: 911538
2010 Jeep Wrangler Shock Absorber & Strut Assembly TENNECO MONROE 911538

Monroe Shock Absorber 911538

TS

Description:

  • Monroe® Reflex® monotube shocks are specifically engineered to provide better handling, control and performance for light trucks and SUV's. These shocks feature a high-pressure gas charge that separates the unit internal oil and nitrogen to provide additional spring rate, helping to maximize damping efficiency and control. To further enhance ride control characteristics, Monroe® Reflex® monotube shocks include a hydraulic lockout to cushion the impact as the vehicle suspension is fully extended.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • High Pressure Nitrogen Gas Charged: High-pressure charge (240-260 PSI) provides a quicker response for excellent vehicle control
  • Hydraulic Lockout: Patented unique hydraulic lock-out isolates impact at the limits of suspension travel
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Free Floating Dividing Piston: Separates shock fluid from high-pressure gas charge.
  • Shock Housing: High strength to resist damage and provide longer service life.
  • Nitrocarburized Rod: For long service life
  • Monroe Reflex Monotube Shock Absorber

Additional Details:

  • Upper Mounting Code: Special Mount
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 12MM Sleeve ID X 1.1/2 Sleeve OAL
  • Compressed Length: 14.690
  • Extended Length: 22.560
  • Travel Length: 7.870
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Extended Hydraulic Lockout: No
  • Extended Bumper Stop: No
  • Compressed Bumper Stop: No
  • Dust Shield Material: Rubber
Rear
2
New
048598098795
$52.33
$44.48
$7.85 (15%)
22
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
3.8L V6Sport- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
3.8L V6X- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
3.8L V6Unlimited Sahara- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
3.8L V6Unlimited X- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
3.8L V6Unlimited Sport- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
3.8L V6Mountain- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
3.8L V6Unlimited Islander- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
3.8L V6Unlimited Mountain- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
3.8L V6Islander- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
3.8L V6Sahara- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: KYBPart#: 554364
2010 Jeep Wrangler Shock Absorber & Strut Assembly KYB SHOCKS 554364

KYB Shock Absorber 554364

KY

Description:

  • High Pressure Monotube Gas Shock

Additional Details:

  • Extended Length (in): 21.57
  • Compressed Length (in): 13.7
  • Stroke (in): 7.87
  • Cover: Yes
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: S1
  • Lower Mount: E2(12.8x40)
Front
2
New
781552585992
$52.66
$44.76
$7.90 (15%)
69
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
3.8L V6IslanderDRIVE TYPE: RWD
3.8L V6MountainDRIVE TYPE: RWD
3.8L V6RubiconDRIVE TYPE: RWD
3.8L V6SaharaDRIVE TYPE: RWD
3.8L V6SportDRIVE TYPE: RWD
3.8L V6Unlimited IslanderDRIVE TYPE: RWD
3.8L V6Unlimited MountainDRIVE TYPE: RWD
3.8L V6Unlimited RubiconDRIVE TYPE: RWD
3.8L V6Unlimited SaharaDRIVE TYPE: RWD
3.8L V6Unlimited SportDRIVE TYPE: RWD
3.8L V6Unlimited XDRIVE TYPE: RWD
3.8L V6XDRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: KYBPart#: 554365
2010 Jeep Wrangler Shock Absorber & Strut Assembly KYB SHOCKS 554365

KYB Shock Absorber 554365

KY

Description:

  • High Pressure Monotube Gas Shock

Additional Details:

  • Extended Length (in): 22.83
  • Compressed Length (in): 14.56
  • Stroke (in): 8.27
  • Cover: Yes
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: E3(68.5x95x0)
  • Lower Mount: E2(12.8x40)
Rear
2
New
781552585978
$52.67
$44.77
$7.90 (15%)
81
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
3.8L V6IslanderDRIVE TYPE: 4WD
3.8L V6MountainDRIVE TYPE: 4WD
3.8L V6RubiconDRIVE TYPE: 4WD
3.8L V6SaharaDRIVE TYPE: 4WD
3.8L V6SportDRIVE TYPE: 4WD
3.8L V6Unlimited IslanderDRIVE TYPE: 4WD
3.8L V6Unlimited MountainDRIVE TYPE: 4WD
3.8L V6Unlimited RubiconDRIVE TYPE: 4WD
3.8L V6Unlimited SaharaDRIVE TYPE: 4WD
3.8L V6Unlimited SportDRIVE TYPE: 4WD
3.8L V6Unlimited XDRIVE TYPE: 4WD
3.8L V6XDRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: MonroePart#: 911539
2010 Jeep Wrangler Shock Absorber & Strut Assembly TENNECO MONROE 911539

Monroe Shock Absorber 911539

TS

Description:

  • Monroe® Reflex® monotube shocks are specifically engineered to provide better handling, control and performance for light trucks and SUV's. These shocks feature a high-pressure gas charge that separates the unit internal oil and nitrogen to provide additional spring rate, helping to maximize damping efficiency and control. To further enhance ride control characteristics, Monroe® Reflex® monotube shocks include a hydraulic lockout to cushion the impact as the vehicle suspension is fully extended.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • High Pressure Nitrogen Gas Charged: High-pressure charge (240-260 PSI) provides a quicker response for excellent vehicle control
  • Hydraulic Lockout: Patented unique hydraulic lock-out isolates impact at the limits of suspension travel
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Free Floating Dividing Piston: Separates shock fluid from high-pressure gas charge.
  • Shock Housing: High strength to resist damage and provide longer service life.
  • Nitrocarburized Rod: For long service life
  • Monroe Reflex Monotube Shock Absorber

Additional Details:

  • Upper Mounting Code: Special Mount
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 12MM Sleeve ID X 1.9/16 Sleeve OAL
  • Compressed Length: 14.760
  • Extended Length: 23.150
  • Travel Length: 8.390
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Extended Hydraulic Lockout: No
  • Extended Bumper Stop: No
  • Compressed Bumper Stop: No
  • Dust Shield Material: Rubber
Rear
2
New
048598098801
$54.24
$46.10
$8.14 (15%)
21
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
3.8L V6Unlimited Rubicon- Premium - Limited Lifetime Warranty
3.8L V6Rubicon- Premium - Limited Lifetime Warranty
Part Name: Shock AbsorberBrand: RanchoPart#: RS5327
2010 Jeep Wrangler Shock Absorber & Strut Assembly TENNECO MONROE RS5327

Rancho Shock Absorber RS5327

TS

Description:

  • The shock that started it all! Rancho® RS5000™ series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000™ is ideal for on and off-road use, at an affordable price. Covered by Rancho®'s limited lifetime warranty.
  • 1 3/8-in. (35mm) diameter piston (select applications) - Ensures performance in any environment
  • 5/8-in. (16mm) diameter piston rod (select applications) - Adds strength and durability
  • Ten-stage velocity sensitive valving - Provides tuning specific for each vehicle
  • Protective boot included - Protects the shock rod and oil seal
  • Limited Lifetime Warranty - Guarantees your investment
  • Rancho RS5000 Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Open Ended, 3/8 Hole ID (Both Ends) X 3.3/16 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.1/2 Sleeve OAL
  • Compressed Length: 14.000
  • Extended Length: 21.313
  • Travel Length: 7.313
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Reserve Tube Diameter: 2.188
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Rear
2
New
039703532709
$50.99
What Is MAP Price?
4
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
3.8L V6Islander- w/ 0 - 2 Rear Raised Height DRIVE TYPE: RWD
3.8L V6Mountain- w/ 0 - 2 Rear Raised Height DRIVE TYPE: RWD
3.8L V6Rubicon- w/ 0 - 2 Rear Raised Height DRIVE TYPE: RWD
3.8L V6Sahara- w/ 0 - 2 Rear Raised Height DRIVE TYPE: RWD
3.8L V6Sport- w/ 0 - 2 Rear Raised Height DRIVE TYPE: RWD
3.8L V6Unlimited Islander- w/ 0 - 2 Rear Raised Height DRIVE TYPE: RWD
3.8L V6Unlimited Mountain- w/ 0 - 2 Rear Raised Height DRIVE TYPE: RWD
3.8L V6Unlimited Rubicon- w/ 0 - 2 Rear Raised Height DRIVE TYPE: RWD
3.8L V6Unlimited Sahara- w/ 0 - 2 Rear Raised Height DRIVE TYPE: RWD
3.8L V6Unlimited Sport- w/ 0 - 2 Rear Raised Height DRIVE TYPE: RWD
3.8L V6Unlimited X- w/ 0 - 2 Rear Raised Height DRIVE TYPE: RWD
3.8L V6X- w/ 0 - 2 Rear Raised Height DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: RanchoPart#: RS5328
2010 Jeep Wrangler Shock Absorber & Strut Assembly TENNECO MONROE RS5328

Rancho Shock Absorber RS5328

TS

Description:

  • The shock that started it all! Rancho® RS5000™ series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000™ is ideal for on and off-road use, at an affordable price. Covered by Rancho®'s limited lifetime warranty.
  • 1 3/8-in. (35mm) diameter piston (select applications) - Ensures performance in any environment
  • 5/8-in. (16mm) diameter piston rod (select applications) - Adds strength and durability
  • Ten-stage velocity sensitive valving - Provides tuning specific for each vehicle
  • Protective boot included - Protects the shock rod and oil seal
  • Limited Lifetime Warranty - Guarantees your investment
  • Rancho RS5000 Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Open Ended, 3/8 Hole ID (Both Ends) X 3.3/16 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.1/2 Sleeve OAL
  • Compressed Length: 14.563
  • Extended Length: 22.563
  • Travel Length: 8.000
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Reserve Tube Diameter: 2.188
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Rear
2
New
039703532808
$50.99
What Is MAP Price?
14
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
3.8L V6Islander- w/ 0 - 2 Rear Raised Height DRIVE TYPE: 4WD
3.8L V6Mountain- w/ 0 - 2 Rear Raised Height DRIVE TYPE: 4WD
3.8L V6Rubicon- w/ 0 - 2 Rear Raised Height DRIVE TYPE: 4WD
3.8L V6Sahara- w/ 0 - 2 Rear Raised Height DRIVE TYPE: 4WD
3.8L V6Sport- w/ 0 - 2 Rear Raised Height DRIVE TYPE: 4WD
3.8L V6Unlimited Islander- w/ 0 - 2 Rear Raised Height DRIVE TYPE: 4WD
3.8L V6Unlimited Mountain- w/ 0 - 2 Rear Raised Height DRIVE TYPE: 4WD
3.8L V6Unlimited Rubicon- w/ 0 - 2 Rear Raised Height DRIVE TYPE: 4WD
3.8L V6Unlimited Sahara- w/ 0 - 2 Rear Raised Height DRIVE TYPE: 4WD
3.8L V6Unlimited Sport- w/ 0 - 2 Rear Raised Height DRIVE TYPE: 4WD
3.8L V6Unlimited X- w/ 0 - 2 Rear Raised Height DRIVE TYPE: 4WD
3.8L V6X- w/ 0 - 2 Rear Raised Height DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: RanchoPart#: RS5329
2010 Jeep Wrangler Shock Absorber & Strut Assembly TENNECO MONROE RS5329

Rancho Shock Absorber RS5329

TS

Description:

  • The shock that started it all! Rancho® RS5000™ series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000™ is ideal for on and off-road use, at an affordable price. Covered by Rancho®'s limited lifetime warranty.
  • 1 3/8-in. (35mm) diameter piston (select applications) - Ensures performance in any environment
  • 5/8-in. (16mm) diameter piston rod (select applications) - Adds strength and durability
  • Ten-stage velocity sensitive valving - Provides tuning specific for each vehicle
  • Protective boot included - Protects the shock rod and oil seal
  • Limited Lifetime Warranty - Guarantees your investment
  • Rancho RS5000 Shock Absorber

Additional Details:

  • Upper Mounting Code: Stem Mount - 2.5/8 Stem Length X 1/2-13 Thread Pitch
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.1/2 Sleeve OAL
  • Compressed Length: 15.520
  • Extended Length: 25.050
  • Travel Length: 9.530
  • Dust Shield: Yes
  • Parts Pack(s): P1167
  • Reserve Tube Diameter: 2.180
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front
2
New
039703532907
$50.99
What Is MAP Price?
4
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
3.8L V6Islander- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Mountain- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Rubicon- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Sahara- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Sport- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Unlimited Islander- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Unlimited Mountain- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Unlimited Rubicon- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Unlimited Sahara- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Unlimited Sport- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Unlimited X- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6X- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
Part Name: Shock AbsorberBrand: RanchoPart#: RS5326
2010 Jeep Wrangler Shock Absorber & Strut Assembly TENNECO MONROE RS5326

Rancho Shock Absorber RS5326

TS

Description:

  • The shock that started it all! Rancho® RS5000™ series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000™ is ideal for on and off-road use, at an affordable price. Covered by Rancho®'s limited lifetime warranty.
  • 1 3/8-in. (35mm) diameter piston (select applications) - Ensures performance in any environment
  • 5/8-in. (16mm) diameter piston rod (select applications) - Adds strength and durability
  • Ten-stage velocity sensitive valving - Provides tuning specific for each vehicle
  • Protective boot included - Protects the shock rod and oil seal
  • Limited Lifetime Warranty - Guarantees your investment
  • Rancho RS5000 Shock Absorber

Additional Details:

  • Upper Mounting Code: Stem Mount - 2.5/8 Stem Length X 1/2-13 Thread Pitch
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.1/2 Sleeve OAL
  • Compressed Length: 14.030
  • Extended Length: 21.850
  • Travel Length: 7.820
  • Dust Shield: Yes
  • Parts Pack(s): P1167
  • Reserve Tube Diameter: 2.180
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front
2
New
039703532600
$50.99
What Is MAP Price?
10
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
3.8L V6Islander- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Mountain- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Rubicon- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Sahara- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Sport- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Unlimited Islander- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Unlimited Mountain- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Unlimited Rubicon- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Unlimited Sahara- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Unlimited Sport- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Unlimited X- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6X- w/ 2 Front Raised Height BODY NUM DOORS: 2
Part Name: Shock AbsorberBrand: RanchoPart#: RS7326
2010 Jeep Wrangler Shock Absorber & Strut Assembly TENNECO MONROE RS7326

Rancho Shock Absorber RS7326

TS

Description:

  • Specifically engineered for high center of gravity light trucks and SUV’s to provide the handling, control and performance expected from Rancho® RS7000MT shock absorbers. These shocks provide enhanced stability over stock twin tubes by reducing body roll in evasive maneuvers and tight turns. These shocks feature a high-pressure gas charge that separates the unit’s internal oil and nitrogen to provide additional spring rate. This helps to maximize damping response that dissipates heat for better control. To further enhance ride control characteristics, Rancho® RS7000MT™ Monotube Shocks include a hydraulic lockout to cushion the impact as the vehicle suspension is fully extended.
  • Off-road inspired Fluon banded piston, provides a consistent seal between piston and pressure tube
  • Ten-stage velocity sensitive valving - Provides tuning specific for each vehicle
  • 46mm bore monotube construction, ideal for larger light trucks, SUVs and more
  • Black natural rubber bushings enhance durability and reduce road harshness
  • Monotube design with high pressure nitrogen gas charge
  • Added protection for the shock rod and oil seal
  • Delivers both performance and appearance
  • Rancho RS7000MT Monotube Shock Absorber
  • Quicker damping response time
  • 1.97-in. (50mm) body diameter
  • Premium long lasting finish

Additional Details:

  • Upper Mounting Code: Stem Mount - 2.5/8 Stem Length X 1/2-13 Thread Pitch
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.1/2 Sleeve OAL
  • Compressed Length: 14.730
  • Extended Length: 23.580
  • Travel Length: 8.850
  • Dust Shield: Yes
  • Parts Pack(s): P1167
  • Extended Hydraulic Lockout: No
  • Extended Bumper Stop: No
  • Compressed Bumper Stop: No
Front
2
New
039703003155
$79.99
What Is MAP Price?
3
or
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
3.8L V6Islander- w/ 0 - 2 Front Raised Height
3.8L V6Mountain- w/ 0 - 2 Front Raised Height
3.8L V6Rubicon- w/ 0 - 2 Front Raised Height
3.8L V6Sahara- w/ 0 - 2 Front Raised Height
3.8L V6Sport- w/ 0 - 2 Front Raised Height
3.8L V6Unlimited Islander- w/ 0 - 2 Front Raised Height
3.8L V6Unlimited Mountain- w/ 0 - 2 Front Raised Height
3.8L V6Unlimited Rubicon- w/ 0 - 2 Front Raised Height
3.8L V6Unlimited Sahara- w/ 0 - 2 Front Raised Height
3.8L V6Unlimited Sport- w/ 0 - 2 Front Raised Height
3.8L V6Unlimited X- w/ 0 - 2 Front Raised Height
3.8L V6X- w/ 0 - 2 Front Raised Height
Part Name: Shock AbsorberBrand: RanchoPart#: RS7328
2010 Jeep Wrangler Shock Absorber & Strut Assembly TENNECO MONROE RS7328

Rancho Shock Absorber RS7328

TS

Description:

  • Specifically engineered for high center of gravity light trucks and SUV’s to provide the handling, control and performance expected from Rancho® RS7000MT shock absorbers. These shocks provide enhanced stability over stock twin tubes by reducing body roll in evasive maneuvers and tight turns. These shocks feature a high-pressure gas charge that separates the unit’s internal oil and nitrogen to provide additional spring rate. This helps to maximize damping response that dissipates heat for better control. To further enhance ride control characteristics, Rancho® RS7000MT™ Monotube Shocks include a hydraulic lockout to cushion the impact as the vehicle suspension is fully extended.
  • Off-road inspired Fluon banded piston, provides a consistent seal between piston and pressure tube
  • Ten-stage velocity sensitive valving - Provides tuning specific for each vehicle
  • 46mm bore monotube construction, ideal for larger light trucks, SUVs and more
  • Black natural rubber bushings enhance durability and reduce road harshness
  • Monotube design with high pressure nitrogen gas charge
  • Added protection for the shock rod and oil seal
  • Delivers both performance and appearance
  • Rancho RS7000MT Monotube Shock Absorber
  • Quicker damping response time
  • 1.97-in. (50mm) body diameter
  • Premium long lasting finish

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Open Ended, 3/8 Hole ID (Both Ends) X 3.3/16 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 15.160
  • Extended Length: 24.010
  • Travel Length: 8.850
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Extended Hydraulic Lockout: No
  • Extended Bumper Stop: No
  • Compressed Bumper Stop: No
Rear
2
New
039703003162
$79.99
What Is MAP Price?
2
or
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
3.8L V6Islander- w/ 0 - 2 Rear Raised Height
3.8L V6Mountain- w/ 0 - 2 Rear Raised Height
3.8L V6Rubicon- w/ 0 - 2 Rear Raised Height
3.8L V6Sahara- w/ 0 - 2 Rear Raised Height
3.8L V6Sport- w/ 0 - 2 Rear Raised Height
3.8L V6Unlimited Islander- w/ 0 - 2 Rear Raised Height
3.8L V6Unlimited Mountain- w/ 0 - 2 Rear Raised Height
3.8L V6Unlimited Rubicon- w/ 0 - 2 Rear Raised Height
3.8L V6Unlimited Sahara- w/ 0 - 2 Rear Raised Height
3.8L V6Unlimited Sport- w/ 0 - 2 Rear Raised Height
3.8L V6Unlimited X- w/ 0 - 2 Rear Raised Height
3.8L V6X- w/ 0 - 2 Rear Raised Height
Part Name: Shock AbsorberBrand: RanchoPart#: RS999326
2010 Jeep Wrangler Shock Absorber & Strut Assembly TENNECO MONROE RS999326

Rancho Shock Absorber RS999326

TS

Description:

  • Rancho's® new RS9000XL shock absorbers feature adjustable damping with either a 2.75- or 2.38-in. diameter reserve tube. This massive shock body allows the RS9000XL to run cooler and more consistent even under the most demanding towing conditions, enhancing performance and durability, and is constructed with a larger than typical 18-mm diameter chromed piston rod. Rancho® RS9000XL™ shock series are engineered with nine position tuning technology that provides nine different levels of shock performance. These premium shocks also have polyurethane bushings that enhance shock performance and durability along with a boot that protects the shock rod and oil seal.
  • 2.75-in. (70mm) body diameter (select applications) - Delivers both performance and appearance
  • 9-position tuning technology - Provides 9 different levels of shock performance
  • Protective boot included - Added protection for the shock rod and oil seal
  • Polyurethane bushings - Enhance shock performance and durability
  • Limited Lifetime Warranty and 90-day free ride offer
  • Liquid metallic finish - Premium long lasting finish
  • Nitrogen gas charged - Optimizes shock performance
  • Large 18mm Nitro Carb rod - strong and durable
  • Rancho RS9000XL Shock Absorber

Additional Details:

  • Upper Mounting Code: Stem Mount - 2.5/8 Stem Length X 1/2-13 Thread Pitch
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.1/2 Sleeve OAL
  • Compressed Length: 13.938
  • Extended Length: 21.813
  • Travel Length: 7.875
  • Dust Shield: Yes
  • Parts Pack(s): P1356
  • Reserve Tube Diameter: 2.188
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front
2
New
039703093262
$110.99
What Is MAP Price?
7
or
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
3.8L V6Islander- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Mountain- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Rubicon- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Sahara- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Sport- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Unlimited Islander- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Unlimited Mountain- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Unlimited Rubicon- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Unlimited Sahara- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Unlimited Sport- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6Unlimited X- w/ 2 Front Raised Height BODY NUM DOORS: 2
3.8L V6X- w/ 2 Front Raised Height BODY NUM DOORS: 2
Part Name: Shock AbsorberBrand: RanchoPart#: RS999330
2010 Jeep Wrangler Shock Absorber & Strut Assembly TENNECO MONROE RS999330

Rancho Shock Absorber RS999330

TS

Description:

  • Rancho's® new RS9000XL shock absorbers feature adjustable damping with either a 2.75- or 2.38-in. diameter reserve tube. This massive shock body allows the RS9000XL to run cooler and more consistent even under the most demanding towing conditions, enhancing performance and durability, and is constructed with a larger than typical 18-mm diameter chromed piston rod. Rancho® RS9000XL™ shock series are engineered with nine position tuning technology that provides nine different levels of shock performance. These premium shocks also have polyurethane bushings that enhance shock performance and durability along with a boot that protects the shock rod and oil seal.
  • 2.75-in. (70mm) body diameter (select applications) - Delivers both performance and appearance
  • 9-position tuning technology - Provides 9 different levels of shock performance
  • Protective boot included - Added protection for the shock rod and oil seal
  • Polyurethane bushings - Enhance shock performance and durability
  • Limited Lifetime Warranty and 90-day free ride offer
  • Liquid metallic finish - Premium long lasting finish
  • Nitrogen gas charged - Optimizes shock performance
  • Large 18mm Nitro Carb rod - strong and durable
  • Rancho RS9000XL Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Open Ended, 3/8 Hole ID (Both Ends) X 3.3/16 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.1/2 Sleeve OAL
  • Compressed Length: 16.110
  • Extended Length: 26.010
  • Travel Length: 9.900
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Reserve Tube Diameter: 2.180
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Rear
2
New
039703093309
$110.99
What Is MAP Price?
3
or
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
3.8L V6Islander- w/ 2 1/2 Rear Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Mountain- w/ 2 1/2 Rear Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Rubicon- w/ 2 1/2 Rear Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Sahara- w/ 2 1/2 Rear Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Sport- w/ 2 1/2 Rear Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Unlimited Islander- w/ 2 1/2 Rear Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Unlimited Mountain- w/ 2 1/2 Rear Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Unlimited Rubicon- w/ 2 1/2 Rear Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Unlimited Sahara- w/ 2 1/2 Rear Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Unlimited Sport- w/ 2 1/2 Rear Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Unlimited X- w/ 2 1/2 Rear Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6X- w/ 2 1/2 Rear Raised Height; w/ Progressive Rate Coils; w/ Sport System
Part Name: Shock AbsorberBrand: RanchoPart#: RS999329
2010 Jeep Wrangler Shock Absorber & Strut Assembly TENNECO MONROE RS999329

Rancho Shock Absorber RS999329

TS

Description:

  • Rancho's® new RS9000XL shock absorbers feature adjustable damping with either a 2.75- or 2.38-in. diameter reserve tube. This massive shock body allows the RS9000XL to run cooler and more consistent even under the most demanding towing conditions, enhancing performance and durability, and is constructed with a larger than typical 18-mm diameter chromed piston rod. Rancho® RS9000XL™ shock series are engineered with nine position tuning technology that provides nine different levels of shock performance. These premium shocks also have polyurethane bushings that enhance shock performance and durability along with a boot that protects the shock rod and oil seal.
  • 2.75-in. (70mm) body diameter (select applications) - Delivers both performance and appearance
  • 9-position tuning technology - Provides 9 different levels of shock performance
  • Protective boot included - Added protection for the shock rod and oil seal
  • Polyurethane bushings - Enhance shock performance and durability
  • Limited Lifetime Warranty and 90-day free ride offer
  • Liquid metallic finish - Premium long lasting finish
  • Nitrogen gas charged - Optimizes shock performance
  • Large 18mm Nitro Carb rod - strong and durable
  • Rancho RS9000XL Shock Absorber

Additional Details:

  • Upper Mounting Code: Stem Mount - 2.5/8 Stem Length X 1/2-13 Thread Pitch
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.1/2 Sleeve OAL
  • Compressed Length: 15.660
  • Extended Length: 25.280
  • Travel Length: 9.620
  • Dust Shield: Yes
  • Parts Pack(s): P1356
  • Reserve Tube Diameter: 2.180
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front
2
New
039703093293
$110.99
What Is MAP Price?
2
or
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
3.8L V6Islander- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Mountain- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Rubicon- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Sahara- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Sport- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Unlimited Islander- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Unlimited Mountain- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Unlimited Rubicon- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Unlimited Sahara- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Unlimited Sport- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6Unlimited X- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
3.8L V6X- w/ 3 - 3 1/2 Front Raised Height; w/ Progressive Rate Coils; w/ Sport System
Part Name: Shock AbsorberBrand: RanchoPart#: RS999332
2010 Jeep Wrangler Shock Absorber & Strut Assembly TENNECO MONROE RS999332

Rancho Shock Absorber RS999332

TS

Description:

  • Rancho's® new RS9000XL shock absorbers feature adjustable damping with either a 2.75- or 2.38-in. diameter reserve tube. This massive shock body allows the RS9000XL to run cooler and more consistent even under the most demanding towing conditions, enhancing performance and durability, and is constructed with a larger than typical 18-mm diameter chromed piston rod. Rancho® RS9000XL™ shock series are engineered with nine position tuning technology that provides nine different levels of shock performance. These premium shocks also have polyurethane bushings that enhance shock performance and durability along with a boot that protects the shock rod and oil seal.
  • 2.75-in. (70mm) body diameter (select applications) - Delivers both performance and appearance
  • 9-position tuning technology - Provides 9 different levels of shock performance
  • Protective boot included - Added protection for the shock rod and oil seal
  • Polyurethane bushings - Enhance shock performance and durability
  • Limited Lifetime Warranty and 90-day free ride offer
  • Liquid metallic finish - Premium long lasting finish
  • Nitrogen gas charged - Optimizes shock performance
  • Large 18mm Nitro Carb rod - strong and durable
  • Rancho RS9000XL Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Open Ended, 3/8 Hole ID (Both Ends) X 3.3/16 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.1/2 Sleeve OAL
  • Compressed Length: 16.813
  • Extended Length: 27.250
  • Travel Length: 10.437
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Reserve Tube Diameter: 2.188
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Rear
2
New
039703093323
$110.99
What Is MAP Price?
6
or
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
3.8L V6Sport- w/ 3 1/2 Rear Raised Height; w/ Rancho RS66105 or RS66105B System
3.8L V6X- w/ 3 1/2 Rear Raised Height; w/ Rancho RS66105 or RS66105B System
3.8L V6Unlimited Sahara- w/ 3 1/2 Rear Raised Height; w/ Rancho RS66105 or RS66105B System
3.8L V6Unlimited X- w/ 3 1/2 Rear Raised Height; w/ Rancho RS66105 or RS66105B System
3.8L V6Unlimited Sport- w/ 3 1/2 Rear Raised Height; w/ Rancho RS66105 or RS66105B System
3.8L V6Mountain- w/ 3 1/2 Rear Raised Height; w/ Rancho RS66105 or RS66105B System
3.8L V6Unlimited Islander- w/ 3 1/2 Rear Raised Height; w/ Rancho RS66105 or RS66105B System
3.8L V6Unlimited Mountain- w/ 3 1/2 Rear Raised Height; w/ Rancho RS66105 or RS66105B System
3.8L V6Islander- w/ 3 1/2 Rear Raised Height; w/ Rancho RS66105 or RS66105B System
3.8L V6Sahara- w/ 3 1/2 Rear Raised Height; w/ Rancho RS66105 or RS66105B System
3.8L V6Unlimited Rubicon- w/ 3 1/2 Rear Raised Height; w/ Rancho RS66105 or RS66105B System
3.8L V6Rubicon- w/ 3 1/2 Rear Raised Height; w/ Rancho RS66105 or RS66105B System