Home

1997 Lincoln Mark VIII

My Vehicle:

1997 Lincoln Mark VIII HVAC Heater Hose

We have found 4 HVAC Heater Hose for

1997 Lincoln Mark VIII

Part Name: HVAC Heater HoseBrand: GatesPart#: 19676

Gates HVAC Heater Hose 19676 - Reservoir To Tee

Position: Reservoir To Tee

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 16.7
Inside Diameter 1 : .73
Inside Diameter 2 : .98
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1997 Lincoln Mark VIII Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 Base, LSC Molded Heater Hose Fuel Type: GAS Reservoir To Tee
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	Base, LSC	Molded Heater Hose	Fuel Type: GAS	Reservoir To Tee

Part Name: HVAC Heater HoseBrand: GatesPart#: 19689

1997 Lincoln Mark VIII HVAC Heater Hose ZO 19689

Gates HVAC Heater Hose 19689 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.4
Inside Diameter 1 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1997 Lincoln Mark VIII Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 Base, LSC Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	Base, LSC	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19688

1997 Lincoln Mark VIII HVAC Heater Hose ZO 19688

Gates HVAC Heater Hose 19688 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.5
Inside Diameter 1 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1997 Lincoln Mark VIII Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 Base, LSC Molded Heater Hose Fuel Type: GAS Heater To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	Base, LSC	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

1997 Lincoln Mark VIII HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Pipe-3 To Engine

Position: Pipe-3 To Engine

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1997 Lincoln Mark VIII Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 Base, LSC Cut to Length, 8" - Straight Heater Hose (Standard) Fuel Type: GAS Pipe-3 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

1997 Lincoln Mark VIII HVAC Heater Hose

Gates HVAC Heater Hose 19676 - Reservoir To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19689 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19688 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Pipe-3 To Engine

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X