1996 Mazda B2300 HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 28467

Gates HVAC Heater Hose 28467 - Valve To Thermostat

Position: Valve To Thermostat

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 16
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 12
Arm Length 2 : 304.8
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Mazda B2300 Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 Base, SE W/A.C.; Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Valve To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	Base, SE	W/A.C.; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Valve To Thermostat

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80403

1996 Mazda B2300 HVAC Heater Hose DY 80403

Dayco HVAC Heater Hose 80403 - Heater Outlet

Position: Heater Outlet

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 1996 Mazda B2300 Engines.
Engine Sub Model Notes Position
2.3L L4 Base, SE 90? Molded Coolant Hose Heater Outlet

Engine	Sub Model	Notes	Position
2.3L L4	Base, SE	90? Molded Coolant Hose	Heater Outlet

Part Interchange

ACDelco	18150L
ACDelco	26667X
CARQUEST	28469
Duralast	E80403
Ford	F57H-18D334-CA
Freshstart	4107
Gates	23570
Gates	28469
General Motors	14076098
General Motors	10387758
General Motors	15032160
Goodyear	63819
Honda	79721-S02-A00
Honda	19504-PPA-A00
Kia	0K30E-61-211D
Kia	0K30E-61-211C
NAPA	9810
NAPA	16285
Pirelli	43819
Toyota	87245-42190

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28469

1996 Mazda B2300 HVAC Heater Hose ZO 28469

Gates HVAC Heater Hose 28469 - Valve To Water Pump

Position: Valve To Water Pump

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 26
Arm Length 1 : 8
Arm Length 1 : 203.2
Arm Length 2 : 18
Arm Length 2 : 457.2
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1996 Mazda B2300 Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 Base, SE W/A.C.; Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Valve To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	Base, SE	W/A.C.; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Valve To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 28471

1996 Mazda B2300 HVAC Heater Hose ZO 28471

Gates HVAC Heater Hose 28471 - Heater To Sensor, Heater To Water Pump

Position: Heater To Sensor, Heater To Water Pump

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 40
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 36
Arm Length 2 : 914.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1996 Mazda B2300 Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 Base, SE W/O A.C.; Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Heater To Sensor, Heater To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	Base, SE	W/O A.C.; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Sensor, Heater To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

1996 Mazda B2300 HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Heater To Valve, Sensor To Pipe-1

Position: Heater To Valve, Sensor To Pipe-1

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1996 Mazda B2300 Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 Base, SE W/O A.C.; Cut to Length, 4" - Straight Heater Hose (Standard) Fuel Type: GAS Heater To Valve, Sensor To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

1996 Mazda B2300 HVAC Heater Hose

Gates HVAC Heater Hose 28467 - Valve To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80403 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28469 - Valve To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28471 - Heater To Sensor, Heater To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Heater To Valve, Sensor To Pipe-1

Description:

Part Specifications:

Features:

Related HVAC Parts

My Vehicle:

1996 Mazda B2300 HVAC Heater Hose

Gates HVAC Heater Hose 28467 - Valve To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80403 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28469 - Valve To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28471 - Heater To Sensor, Heater To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Heater To Valve, Sensor To Pipe-1

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X