1990 Oldsmobile Cutlass Calais Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71416

Dayco Radiator Coolant Hose 71416 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 14
End 1 Inside Diameter : 1 5/16
End 2 Inside Diameter : 1 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1990 Oldsmobile Cutlass Calais Engines.
Engine Sub Model Notes Position
2.5L L4 Base, GT, S Curved Radiator Hose Upper
Part Interchange
ACDelco 22231M
CARQUEST 21756
Duralast C71416
Freshstart 477
Gates 21756
General Motors 22538778
Goodyear 61669
NAPA 8447
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L L4	Base, GT, S	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 81041

1990 Oldsmobile Cutlass Calais Radiator Coolant Hose DY 81041

Dayco Radiator Coolant Hose 81041 - Upper

Position: Upper

Description:

FLEX RADIATOR HOSE STANDARD DAYCO

Features:

Precision molded in standard lengths, Dayco’s Flex Radiator Hose is designed to replace straight or molded radiator hoses. The knitted reinforcement and synthetic EPDM construction meets SAE J20R4, Class D-2 requirements. This hose is designed to prevent splitting, ballooning, and elongation; and, resists ozone and other detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). The corrugations provide excellent hose flexibility without flattening or collapse. This Flex Radiator Hose is another Dayco® product proudly made in the USA. Note: This hose is NOT suitable for fuel or oil transfer.

Condition: New

Fitments
This Part Fits Following 1990 Oldsmobile Cutlass Calais Engines.
Engine Sub Model Notes Position
2.5L L4 Base, GT, S Flex Radiator Hose Upper

Engine	Sub Model	Notes	Position
2.5L L4	Base, GT, S	Flex Radiator Hose	Upper

Part Interchange

ACDelco	31610
ACDelco	31611
Atlas	501
AutoZone	C6405
Autopar	RH14
Bowes	1114
CARQUEST	25251
CARQUEST	25252
Chief	C6405
Conoco	FH51
Datsun/Nissan	21503-16900
Duralast	81041
Ford	3E33-8B502-AC
Ford	3W33-8B502-AC
Ford	B1AA-8260-A
Ford	C9PZ-8260-J
Ford	C2RZ-8260-W
Freshstart	1115
Frigiking	71-01204
Gates	25252
Gates	26405
Gates	25251
General Motors	22533816
Goodyear	52015
Gulf	5015
Lazorlite	L34-5679
Mobil	5M14
Mopar	BH604
Motorcraft	KA150
NAPA	FF200
NAPA	FM02
NAPA	FF212
Pirelli	514
Rover	PEH101630
Texaco	109
Texaco	1115
Thermo-King	1082A64H04
Toyota	90916-01083
Uniroyal	5015
Uniroyal	FC501
V&W	1115
White	972F2-18
White	972F2-38
White	N91204X
White	1705044

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71366

1990 Oldsmobile Cutlass Calais Radiator Coolant Hose DY 71366

Dayco Radiator Coolant Hose 71366 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18 3/8
End 1 Inside Diameter : 1 5/16
End 2 Inside Diameter : 1 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1990 Oldsmobile Cutlass Calais Engines.
Engine Sub Model Notes Position
2.3L L4 International, S, SL w/A.C. - Curved Radiator Hose Upper
Part Interchange
ACDelco 24217L
Atlas MC186
CARQUEST 21672
Duralast E71366
Freshstart 507
Gates 21672
General Motors 10146903
General Motors 22569167
General Motors 22532011
Goodyear 61451
NAPA 8386
Pirelli 41451
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.3L L4	International, S, SL	w/A.C. - Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 25252

1990 Oldsmobile Cutlass Calais Radiator Coolant Hose ZO 25252

Gates Radiator Coolant Hose 25252 - Upper

Position: Upper

Description:

Flexible Coolant Hose Standard

Part Specifications:

Centerline Length : 15
Inside Diameter 1 : 1.25

Features:

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
- Improved sealing surface for greater leak resistance and increased flexibility for easier installation.
- Heat and ozone resistant cover.
- Rated for SAE 20R5 Class D-2 performance.
- High temperature rating up to +257 Deg. F (+125 Deg. C).
Note: Gates recommends replacing clamps each time a new coolant hose is installed.
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progess

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1990 Oldsmobile Cutlass Calais Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Base, GT, S Flexible Coolant Hose (Standard) Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Base, GT, S	Flexible Coolant Hose (Standard)	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 81061

1990 Oldsmobile Cutlass Calais Radiator Coolant Hose DY 81061

Dayco Radiator Coolant Hose 81061 - Upper

Position: Upper

Description:

FLEX RADIATOR HOSE STANDARD DAYCO

Features:

Precision molded in standard lengths, Dayco’s Flex Radiator Hose is designed to replace straight or molded radiator hoses. The knitted reinforcement and synthetic EPDM construction meets SAE J20R4, Class D-2 requirements. This hose is designed to prevent splitting, ballooning, and elongation; and, resists ozone and other detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). The corrugations provide excellent hose flexibility without flattening or collapse. This Flex Radiator Hose is another Dayco® product proudly made in the USA. Note: This hose is NOT suitable for fuel or oil transfer.

Condition: New

Fitments
This Part Fits Following 1990 Oldsmobile Cutlass Calais Engines.
Engine Sub Model Notes Position
2.3L L4 International, S, SL w/A.C. - Flex Radiator Hose Upper
3.3L V6 SL Flex Radiator Hose Upper

Engine	Sub Model	Notes	Position
2.3L L4	International, S, SL	w/A.C. - Flex Radiator Hose	Upper
3.3L V6	SL	Flex Radiator Hose	Upper

Part Interchange

ACDelco	31613
ACDelco	31614
Atlas	552
AutoZone	C6407
CARQUEST	25255
CARQUEST	25254
Chief	C6407
Duralast	81061
Freshstart	1120
Gates	25254
Gates	25255
Gates	26407
Goodyear	52021
Lazorlite	L34-5822
NAPA	FF239
NAPA	FM71
NAPA	FF251
Texaco	119
Uniroyal	5020
V&W	1120

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71203

1990 Oldsmobile Cutlass Calais Radiator Coolant Hose DY 71203

Dayco Radiator Coolant Hose 71203 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 20
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1990 Oldsmobile Cutlass Calais Engines.
Engine Sub Model Notes Position
3.3L V6 SL Cut to Fit - Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
3.3L V6	SL	Cut to Fit - Curved Radiator Hose	Upper

Part Interchange

ACDelco	24159L
Atlas	MC224
AutoZone	C1438
CARQUEST	21438
Duralast	E71203
Gates	21438
General Motors	25516661
General Motors	25524330
General Motors	25522875
General Motors	25517352
General Motors	22538632
General Motors	10082862
General Motors	14076062
General Motors	10170192
General Motors	14093570
General Motors	1638394
General Motors	10120056
Mitsubishi	MR450959
Mitsubishi	MR312256
NAPA	8150
Toyota	16572-02010
Toyota	16572-01030

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 25257

1990 Oldsmobile Cutlass Calais Radiator Coolant Hose ZO 25257

Gates Radiator Coolant Hose 25257 - Upper

Position: Upper

Description:

Flexible Coolant Hose Standard

Part Specifications:

Centerline Length : 23
Inside Diameter 1 : 1.25

Features:

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
- Improved sealing surface for greater leak resistance and increased flexibility for easier installation.
- Heat and ozone resistant cover.
- Rated for SAE 20R5 Class D-2 performance.
- High temperature rating up to +257 Deg. F (+125 Deg. C).
Note: Gates recommends replacing clamps each time a new coolant hose is installed.
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progess

Condition: New

Fitments
This Part Fits Following 1990 Oldsmobile Cutlass Calais Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 International, S, SL Flexible Coolant Hose (Standard) Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	International, S, SL	Flexible Coolant Hose (Standard)	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21672

1990 Oldsmobile Cutlass Calais Radiator Coolant Hose ZO 21672

Gates Radiator Coolant Hose 21672 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 23.1
Inside Diameter 1 : 1.31
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1990 Oldsmobile Cutlass Calais Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 International, S, SL Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	International, S, SL	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 25255

1990 Oldsmobile Cutlass Calais Radiator Coolant Hose ZO 25255

Gates Radiator Coolant Hose 25255 - Upper

Position: Upper

Description:

Flexible Coolant Hose Standard

Part Specifications:

Centerline Length : 20
Inside Diameter 1 : 1.25

Features:

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
- Improved sealing surface for greater leak resistance and increased flexibility for easier installation.
- Heat and ozone resistant cover.
- Rated for SAE 20R5 Class D-2 performance.
- High temperature rating up to +257 Deg. F (+125 Deg. C).
Note: Gates recommends replacing clamps each time a new coolant hose is installed.
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progess

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1990 Oldsmobile Cutlass Calais Engines.
Engine Sub Model Notes Fit Notes Position
3.3L V6 SL Flexible Coolant Hose (Standard) Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.3L V6	SL	Flexible Coolant Hose (Standard)	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 20795

1990 Oldsmobile Cutlass Calais Radiator Coolant Hose ZO 20795

Gates Radiator Coolant Hose 20795 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 20.2
Inside Diameter 1 : 1.25
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1990 Oldsmobile Cutlass Calais Engines.
Engine Sub Model Notes Fit Notes Position
3.3L V6 SL Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.3L V6	SL	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71454

1990 Oldsmobile Cutlass Calais Radiator Coolant Hose DY 71454

Dayco Radiator Coolant Hose 71454 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Branched Hose
Trunk Height : 13 1/2
End 1 Inside Diameter : 1 5/16
End 1 Outside Diameter : 1 21/32
End 2 Inside Diameter : 1 5/16
End 2 Outside Diameter : 1 21/32
End 3 Inside Diameter : 3/4
End 3 Outside Diameter : 1 1/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1990 Oldsmobile Cutlass Calais Engines.
Engine Sub Model Notes Position
2.5L L4 Base, GT, S Curved Radiator Hose Lower
Part Interchange
ACDelco 24261L
Atlas MC199
CARQUEST 21904
Duralast C71454
Freshstart 432
Gates 21904
Gates 21786
General Motors 22551441
Goodyear 61511
NAPA 8476
NAPA 8594
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L L4	Base, GT, S	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21795

1990 Oldsmobile Cutlass Calais Radiator Coolant Hose ZO 21795

Gates Radiator Coolant Hose 21795 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 17.5
Number of Branches : 1
Inside Diameter 1 : 1.31
Inside Diameter 2 : 1.56
Inside Diameter 3 : .69
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1990 Oldsmobile Cutlass Calais Engines.
Engine Sub Model Notes Fit Notes Position
3.3L V6 SL Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	22231M
CARQUEST	21756
Duralast	C71416
Freshstart	477
Gates	21756
General Motors	22538778
Goodyear	61669
NAPA	8447

ACDelco	24217L
Atlas	MC186
CARQUEST	21672
Duralast	E71366
Freshstart	507
Gates	21672
General Motors	10146903
General Motors	22569167
General Motors	22532011
Goodyear	61451
NAPA	8386
Pirelli	41451

ACDelco	24261L
Atlas	MC199
CARQUEST	21904
Duralast	C71454
Freshstart	432
Gates	21904
Gates	21786
General Motors	22551441
Goodyear	61511
NAPA	8476
NAPA	8594

My Vehicle:

1990 Oldsmobile Cutlass Calais Radiator Coolant Hose

Dayco Radiator Coolant Hose 71416 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 81041 - Upper

Description:

Features:

Dayco Radiator Coolant Hose 71366 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 25252 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 81061 - Upper

Description:

Features:

Dayco Radiator Coolant Hose 71203 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 25257 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21672 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 25255 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 20795 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71454 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21795 - Lower

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X