Home

1993 Oldsmobile Cutlass Supreme

My Vehicle:

1993 Oldsmobile Cutlass Supreme Radiator Coolant Hose

We have found 11 Radiator Coolant Hose for

1993 Oldsmobile Cutlass Supreme

Part Name: Radiator Coolant HoseBrand: GatesPart#: 25253

Gates Radiator Coolant Hose 25253 - Upper

Position: Upper

Description:

Flexible Coolant Hose Standard

Part Specifications:

Centerline Length : 17
Inside Diameter 1 : 1.25

Features:

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
- Improved sealing surface for greater leak resistance and increased flexibility for easier installation.
- Heat and ozone resistant cover.
- Rated for SAE 20R5 Class D-2 performance.
- High temperature rating up to +257 Deg. F (+125 Deg. C).
Note: Gates recommends replacing clamps each time a new coolant hose is installed.
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progess

Condition: New

Fitments
This Part Fits Following 1993 Oldsmobile Cutlass Supreme Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base, International, S Flexible Coolant Hose (Standard) Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base, International, S	Flexible Coolant Hose (Standard)	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71417

1993 Oldsmobile Cutlass Supreme Radiator Coolant Hose DY 71417

Dayco Radiator Coolant Hose 71417 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 17 3/4
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1993 Oldsmobile Cutlass Supreme Engines.
Engine Sub Model Notes Position
3.1L V6 Base, International, S Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
3.1L V6	Base, International, S	Curved Radiator Hose	Upper

Part Interchange

ACDelco	24194L
Atlas	MC169
CARQUEST	21588
Duralast	E71417
Freshstart	406
Gates	21588
General Motors	10176068
General Motors	10080241
General Motors	10060786
General Motors	10159504
General Motors	10080385
General Motors	10171068
General Motors	10176069
General Motors	10060774
Goodyear	61488
NAPA	8307
Pirelli	41488

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71586

1993 Oldsmobile Cutlass Supreme Radiator Coolant Hose DY 71586

Dayco Radiator Coolant Hose 71586 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1993 Oldsmobile Cutlass Supreme Engines.
Engine Sub Model Notes Position
3.1L V6 Base, International, S Curved Radiator Hose Lower
Part Interchange
ACDelco 22278M
Atlas MC208
CARQUEST 21991
Duralast B71586
Freshstart 606
Gates 21991
General Motors 10175935
General Motors 10284401
General Motors 10175934
Goodyear 61724
MasterPro 21991
NAPA 8681
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.1L V6	Base, International, S	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21957

1993 Oldsmobile Cutlass Supreme Radiator Coolant Hose ZO 21957

Gates Radiator Coolant Hose 21957 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 11.9
Inside Diameter 1 : 1.27
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Oldsmobile Cutlass Supreme Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base, International, S Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base, International, S	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21958

1993 Oldsmobile Cutlass Supreme Radiator Coolant Hose ZO 21958

Gates Radiator Coolant Hose 21958 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 17.2
Inside Diameter 1 : 1.27
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Oldsmobile Cutlass Supreme Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base, International, S Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base, International, S	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71850

1993 Oldsmobile Cutlass Supreme Radiator Coolant Hose DY 71850

Dayco Radiator Coolant Hose 71850 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 17
End 1 Inside Diameter : 1 5/16
End 2 Inside Diameter : 1 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1993 Oldsmobile Cutlass Supreme Engines.
Engine Sub Model Notes Position
3.1L V6 Base, International, S Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
3.1L V6	Base, International, S	Curved Radiator Hose	Upper

Part Interchange

ACDelco	22556M
ACDelco	24297L
ACDelco	24520L
ACDelco	22482M
ACDelco	26346X
CARQUEST	22905
CARQUEST	22814
Duralast	C71850
Freshstart	1038
Gates	22814
Gates	22905
Gates	22344
Gates	22052
Gates	23078
General Motors	89023411
General Motors	10401999
General Motors	10260988
General Motors	10233201
General Motors	52498620
General Motors	10262986
General Motors	10421339
General Motors	15125777
General Motors	151927944
General Motors	15275203
General Motors	10190660
General Motors	10332900
General Motors	10285951
Goodyear	62775
Goodyear	62088
Goodyear	62500
Mitsubishi	MB605486
NAPA	9743
NAPA	9449
NAPA	8977
NAPA	8735
NAPA	9540

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71641

1993 Oldsmobile Cutlass Supreme Radiator Coolant Hose DY 71641

Dayco Radiator Coolant Hose 71641 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1993 Oldsmobile Cutlass Supreme Engines.
Engine Sub Model Notes Position
3.4L V6 Base, International, S Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
3.4L V6	Base, International, S	Curved Radiator Hose	Upper

Part Interchange

ACDelco	22391M
ACDelco	22269M
CARQUEST	21958
CARQUEST	22499
Duralast	B71641
Freshstart	608
Freshstart	62618
Gates	22499
Gates	21958
General Motors	10170744
Goodyear	62618
Goodyear	62011
Kia	0K2N5-15-186B
Kia	K2A5-15-186
Kia	0K2NS-15-186B
Kia	0K2N5-15-18-186B
NAPA	8648
NAPA	9132

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21588

1993 Oldsmobile Cutlass Supreme Radiator Coolant Hose ZO 21588

Gates Radiator Coolant Hose 21588 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 22.1
Inside Diameter 1 : 1.25
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Oldsmobile Cutlass Supreme Engines.
Engine Sub Model Notes Fit Notes Position
3.1L V6 Base, International, S Cut to fit - Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.1L V6	Base, International, S	Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 25255

1993 Oldsmobile Cutlass Supreme Radiator Coolant Hose ZO 25255

Gates Radiator Coolant Hose 25255 - Upper

Position: Upper

Description:

Flexible Coolant Hose Standard

Part Specifications:

Centerline Length : 20
Inside Diameter 1 : 1.25

Features:

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
- Improved sealing surface for greater leak resistance and increased flexibility for easier installation.
- Heat and ozone resistant cover.
- Rated for SAE 20R5 Class D-2 performance.
- High temperature rating up to +257 Deg. F (+125 Deg. C).
Note: Gates recommends replacing clamps each time a new coolant hose is installed.
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progess

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1993 Oldsmobile Cutlass Supreme Engines.
Engine Sub Model Notes Fit Notes Position
3.1L V6 Base, International, S Flexible Coolant Hose (Standard) Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.1L V6	Base, International, S	Flexible Coolant Hose (Standard)	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23228

1993 Oldsmobile Cutlass Supreme Radiator Coolant Hose ZO 23228

Gates Radiator Coolant Hose 23228 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 17.2
Inside Diameter 1 : 1.27
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Oldsmobile Cutlass Supreme Engines.
Engine Sub Model Notes Fit Notes Position
3.1L V6 Base, International, S Mar. & Newer - Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.1L V6	Base, International, S	Mar. & Newer - Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21991

1993 Oldsmobile Cutlass Supreme Radiator Coolant Hose ZO 21991

Gates Radiator Coolant Hose 21991 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 16.4
Inside Diameter 1 : 1.27
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Oldsmobile Cutlass Supreme Engines.
Engine Sub Model Notes Fit Notes Position
3.1L V6 Base, International, S Feb. & Older - Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	22278M
Atlas	MC208
CARQUEST	21991
Duralast	B71586
Freshstart	606
Gates	21991
General Motors	10175935
General Motors	10284401
General Motors	10175934
Goodyear	61724
MasterPro	21991
NAPA	8681

My Vehicle:

1993 Oldsmobile Cutlass Supreme Radiator Coolant Hose

Gates Radiator Coolant Hose 25253 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71417 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71586 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21957 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21958 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71850 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71641 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21588 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 25255 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23228 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21991 - Lower

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X