My Vehicle:

Search Filter:
Engine
    x
  • Check All
  • 5.7L V8
  • 6.5L V8
Brand
    x
  • Check All
  • Bilstein
  • KYB
  • Monroe
  • Rancho
  • Sachs
Position
    x
  • Check All
  • Front
  • Rear

1995 GMC Yukon Shock Absorber & Strut Assembly

We have found 69 Shock Absorber & Strut Assembly for
1995 GMC Yukon 1995 GMC Yukon
Part Name: Shock AbsorberBrand: KYBPart#: 344266
1995 GMC Yukon Shock Absorber & Strut Assembly KYB SHOCKS 344266

KYB Shock Absorber 344266

KY

Description:

  • Gas Shock

Additional Details:

  • Extended Length (in): 16.34
  • Compressed Length (in): 10.63
  • Stroke (in): 5.71
  • Cover: Yes
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: E2(12.8x62)
  • Lower Mount: E2(12.8x41.3)
Front
2
New
781552000310
$25.22
$21.44
$3.78 (15%)
231
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
5.7L V8BaseDRIVE TYPE: 4WD
6.5L V8BaseDRIVE TYPE: 4WD
5.7L V8SLEDRIVE TYPE: 4WD
6.5L V8SLEDRIVE TYPE: 4WD
5.7L V8SLTDRIVE TYPE: 4WD
6.5L V8SLTDRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: MonroePart#: 32266
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 32266

Monroe Shock Absorber 32266

TS

Description:

  • Monro-Matic Plus® shock absorbers are nitrogen gas charged and feature velocity sensitive valving and all weather fluid, which offers passenger cars improved comfort at an economical price.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/16 inch Bore: Larger bore than most shocks to provide more efficient and consistent control
  • Monroe Monro-Matic Plus Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.7/8 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 14MM Sleeve ID X 1.11/16 Sleeve OAL
  • Compressed Length: 15.500
  • Extended Length: 25.375
  • Travel Length: 9.875
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Cylinder Included: No
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: Yes
  • Extended Hydraulic Lockout: No
  • Dust Shield Material: Metal
Rear
2
New
048598025494
$26.20
$22.27
$3.93 (15%)
11
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
5.7L V8BaseBODY NUM DOORS: 2
6.5L V8BaseBODY NUM DOORS: 2
5.7L V8SLEBODY NUM DOORS: 2
6.5L V8SLEBODY NUM DOORS: 2
5.7L V8SLTBODY NUM DOORS: 2
6.5L V8SLTBODY NUM DOORS: 2
Part Name: Shock AbsorberBrand: MonroePart#: 32263
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 32263

Monroe Shock Absorber 32263

TS

Description:

  • Monro-Matic Plus® shock absorbers are nitrogen gas charged and feature velocity sensitive valving and all weather fluid, which offers passenger cars improved comfort at an economical price.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/16 inch Bore: Larger bore than most shocks to provide more efficient and consistent control
  • Monroe Monro-Matic Plus Shock Absorber

Additional Details:

  • Upper Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 2.7/16 Sleeve OAL
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 12MM Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 11.340
  • Extended Length: 16.440
  • Travel Length: 5.100
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Cylinder Included: No
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: Yes
  • Extended Hydraulic Lockout: No
  • Dust Shield Material: Metal
Front
2
New
048598025463
$27.28
$23.19
$4.09 (15%)
78
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
5.7L V8BaseDRIVE TYPE: 4WD
6.5L V8BaseDRIVE TYPE: 4WD
5.7L V8SLEDRIVE TYPE: 4WD
6.5L V8SLEDRIVE TYPE: 4WD
5.7L V8SLTDRIVE TYPE: 4WD
6.5L V8SLTDRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: MonroePart#: 32224
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 32224

Monroe Shock Absorber 32224

TS

Description:

  • Monro-Matic Plus® shock absorbers are nitrogen gas charged and feature velocity sensitive valving and all weather fluid, which offers passenger cars improved comfort at an economical price.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/16 inch Bore: Larger bore than most shocks to provide more efficient and consistent control
  • Monroe Monro-Matic Plus Shock Absorber

Additional Details:

  • Upper Mounting Code: Stem Mount - 2.3/8 Stem Length X 3/8-16 Thread Pitch
  • Lower Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.7/8 Pin Length (Hole Center to Center)
  • Compressed Length: 9.500
  • Extended Length: 14.000
  • Travel Length: 4.500
  • Dust Shield: No
  • Parts Pack(s): P1134
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front
2
New
048598024916
$27.28
$23.19
$4.09 (15%)
85
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
5.7L V8BaseDRIVE TYPE: RWD
6.5L V8BaseDRIVE TYPE: RWD
5.7L V8SLEDRIVE TYPE: RWD
6.5L V8SLEDRIVE TYPE: RWD
5.7L V8SLTDRIVE TYPE: RWD
6.5L V8SLTDRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: MonroePart#: 32264
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 32264

Monroe Shock Absorber 32264

TS

Description:

  • Monro-Matic Plus® shock absorbers are nitrogen gas charged and feature velocity sensitive valving and all weather fluid, which offers passenger cars improved comfort at an economical price.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/16 inch Bore: Larger bore than most shocks to provide more efficient and consistent control
  • Monroe Monro-Matic Plus Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.7/8 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 14MM Sleeve ID X 1.11/16 Sleeve OAL
  • Compressed Length: 14.000
  • Extended Length: 22.625
  • Travel Length: 8.625
  • Dust Shield: Yes
  • Parts Pack(s): P941
  • Cylinder Included: No
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: Yes
  • Extended Hydraulic Lockout: No
  • Dust Shield Material: Metal
Rear
2
New
048598025470
$27.28
$23.19
$4.09 (15%)
36
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
5.7L V8BaseBODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8BaseBODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLEBODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLEBODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLTBODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLTBODY NUM DOORS: 4, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: MonroePart#: 32265
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 32265

Monroe Shock Absorber 32265

TS

Description:

  • Monro-Matic Plus® shock absorbers are nitrogen gas charged and feature velocity sensitive valving and all weather fluid, which offers passenger cars improved comfort at an economical price.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/16 inch Bore: Larger bore than most shocks to provide more efficient and consistent control
  • Monroe Monro-Matic Plus Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.7/8 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 14MM Sleeve ID X 1.11/16 Sleeve OAL
  • Compressed Length: 14.875
  • Extended Length: 24.000
  • Travel Length: 9.125
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Cylinder Included: No
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: Yes
  • Extended Hydraulic Lockout: No
  • Dust Shield Material: Metal
Rear
2
New
048598025487
$27.28
$23.19
$4.09 (15%)
83
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
5.7L V8BaseBODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8BaseBODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLEBODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLEBODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLTBODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLTBODY NUM DOORS: 4, DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: KYBPart#: 344273
1995 GMC Yukon Shock Absorber & Strut Assembly KYB SHOCKS 344273

KYB Shock Absorber 344273

KY

Description:

  • Gas Shock

Additional Details:

  • Extended Length (in): 23.19
  • Compressed Length (in): 13.94
  • Stroke (in): 9.25
  • Cover: Yes
  • Rebound Stop: No
  • Bump Stop: No
  • Upper Mount: E3(61.6x87x0)
  • Lower Mount: E2(14.6x42)
Rear
2
New
781552000389
$28.42
$24.16
$4.26 (15%)
83
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Recommended OE Replacement BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8Base- Recommended OE Replacement BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLE- Recommended OE Replacement BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLE- Recommended OE Replacement BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLT- Recommended OE Replacement BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLT- Recommended OE Replacement BODY NUM DOORS: 4, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: KYBPart#: 344262
1995 GMC Yukon Shock Absorber & Strut Assembly KYB SHOCKS 344262

KYB Shock Absorber 344262

KY

Description:

  • Gas Shock

Additional Details:

  • Extended Length (in): 24.37
  • Compressed Length (in): 14.52
  • Stroke (in): 9.85
  • Cover: Yes
  • Rebound Stop: No
  • Bump Stop: No
  • Upper Mount: E3(61.6x87x0)
  • Lower Mount: E2(14.6x42)
Rear
2
New
781552000273
$28.47
$24.20
$4.27 (15%)
177
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
5.7L V8BaseBODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8BaseBODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLEBODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLEBODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLTBODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLTBODY NUM DOORS: 4, DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: SachsPart#: 610 046
1995 GMC Yukon Shock Absorber & Strut Assembly SACHS CLUTCHES 610 046

Sachs Shock Absorber 610 046

S2

Description:

  • Shock Absorber & Strut Assembly Sachs 610 046
Front
2
New
$29.46
$25.04
$4.42 (15%)
5
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- OE Alternative; Value Line BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8Base- OE Alternative; Value Line BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLE- OE Alternative; Value Line BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLE- OE Alternative; Value Line BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLT- OE Alternative; Value Line BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLT- OE Alternative; Value Line BODY NUM DOORS: 4, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: KYBPart#: 344265
1995 GMC Yukon Shock Absorber & Strut Assembly KYB SHOCKS 344265

KYB Shock Absorber 344265

KY

Description:

  • Gas Shock

Additional Details:

  • Extended Length (in): 13.86
  • Compressed Length (in): 9.13
  • Stroke (in): 4.72
  • Cover: No
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: S1
  • Lower Mount: E3(55x77x10)
Front
2
New
781552000303
$30.29
$25.75
$4.54 (15%)
231
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Recommended OE Replacement DRIVE TYPE: RWD
6.5L V8Base- Recommended OE Replacement DRIVE TYPE: RWD
5.7L V8SLE- Recommended OE Replacement DRIVE TYPE: RWD
6.5L V8SLE- Recommended OE Replacement DRIVE TYPE: RWD
5.7L V8SLT- Recommended OE Replacement DRIVE TYPE: RWD
6.5L V8SLT- Recommended OE Replacement DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: KYBPart#: 344263
1995 GMC Yukon Shock Absorber & Strut Assembly KYB SHOCKS 344263

KYB Shock Absorber 344263

KY

Description:

  • Gas Shock

Additional Details:

  • Extended Length (in): 26.73
  • Compressed Length (in): 15.71
  • Stroke (in): 11.02
  • Cover: Yes
  • Rebound Stop: No
  • Bump Stop: No
  • Upper Mount: E3(61.6x87x0)
  • Lower Mount: E2(14.6x42)
Rear
2
New
781552000280
$31.42
$26.71
$4.71 (15%)
204
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Recommended OE Replacement BODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8Base- Recommended OE Replacement BODY NUM DOORS: 2, DRIVE TYPE: RWD
5.7L V8SLE- Recommended OE Replacement BODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8SLE- Recommended OE Replacement BODY NUM DOORS: 2, DRIVE TYPE: RWD
5.7L V8SLT- Recommended OE Replacement BODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8SLT- Recommended OE Replacement BODY NUM DOORS: 2, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: SachsPart#: 030 780
1995 GMC Yukon Shock Absorber & Strut Assembly SACHS CLUTCHES 030 780

Sachs Shock Absorber 030 780

S2

Description:

  • Shock Absorber & Strut Assembly Sachs 030 780
Rear
2
New
$34.46
$29.29
$5.17 (15%)
1
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- OE Replacement; Super Touring BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8Base- OE Replacement; Super Touring BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLE- OE Replacement; Super Touring BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLE- OE Replacement; Super Touring BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLT- OE Replacement; Super Touring BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLT- OE Replacement; Super Touring BODY NUM DOORS: 4, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: SachsPart#: 310 284
1995 GMC Yukon Shock Absorber & Strut Assembly SACHS CLUTCHES 310 284

Sachs Shock Absorber 310 284

S2

Description:

  • Shock Absorber & Strut Assembly Sachs 310 284
Front
2
New
$36.42
$30.96
$5.46 (15%)
4
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- OE Alternative; Advantage; Advantage Performance Upgrade BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8Base- OE Alternative; Advantage; Advantage Performance Upgrade BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLE- OE Alternative; Advantage; Advantage Performance Upgrade BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLE- OE Alternative; Advantage; Advantage Performance Upgrade BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLT- OE Alternative; Advantage; Advantage Performance Upgrade BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLT- OE Alternative; Advantage; Advantage Performance Upgrade BODY NUM DOORS: 4, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: MonroePart#: 34762
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 34762

Monroe Shock Absorber 34762

TS

Description:

  • The Monroe® Gas-Magnum® truck shock absorber is designed for mid to full size, hard working pick-up trucks and vans. These units provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1 inch bore shocks, Monroe® Gas-Magnum® truck shocks work more efficiently with less effort.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • Full Displaced Valving: Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/8 inch Bore: Lower operating pressure than standard 1 inch bore units
  • 2 inch Reserve Tube: More fluid for more consistent performance.
  • Monroe Gas-Magnum Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.7/8 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 13.875
  • Extended Length: 22.500
  • Travel Length: 8.625
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Cylinder Included: No
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: Yes
  • Extended Hydraulic Lockout: No
  • Dust Shield Material: Metal
Rear
2
New
048598050021
$37.89
$32.21
$5.68 (15%)
118
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8Base- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLE- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLE- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLT- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLT- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: MonroePart#: 34798
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 34798

Monroe Shock Absorber 34798

TS

Description:

  • The Monroe® Gas-Magnum® truck shock absorber is designed for mid to full size, hard working pick-up trucks and vans. These units provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1 inch bore shocks, Monroe® Gas-Magnum® truck shocks work more efficiently with less effort.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • Full Displaced Valving: Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/8 inch Bore: Lower operating pressure than standard 1 inch bore units
  • 2 inch Reserve Tube: More fluid for more consistent performance.
  • Monroe Gas-Magnum Shock Absorber

Additional Details:

  • Upper Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 2.7/16 Sleeve OAL
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 11.375
  • Extended Length: 16.500
  • Travel Length: 5.125
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: Yes
  • Extended Hydraulic Lockout: No
  • Dust Shield Material: Metal
Front
2
New
048598050472
$37.91
$32.22
$5.69 (15%)
237
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
6.5L V8Base- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
5.7L V8SLE- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
6.5L V8SLE- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
5.7L V8SLT- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
6.5L V8SLT- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: MonroePart#: 34767
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 34767

Monroe Shock Absorber 34767

TS

Description:

  • The Monroe® Gas-Magnum® truck shock absorber is designed for mid to full size, hard working pick-up trucks and vans. These units provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1 inch bore shocks, Monroe® Gas-Magnum® truck shocks work more efficiently with less effort.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • Full Displaced Valving: Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/8 inch Bore: Lower operating pressure than standard 1 inch bore units
  • 2 inch Reserve Tube: More fluid for more consistent performance.
  • Monroe Gas-Magnum Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.7/8 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 15.250
  • Extended Length: 25.250
  • Travel Length: 10.000
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Cylinder Included: No
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: Yes
  • Extended Hydraulic Lockout: No
  • Dust Shield Material: Metal
Rear
2
New
048598050076
$38.69
$32.89
$5.80 (15%)
41
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Premium - Limited Lifetime Warranty BODY NUM DOORS: 2
6.5L V8Base- Premium - Limited Lifetime Warranty BODY NUM DOORS: 2
5.7L V8SLE- Premium - Limited Lifetime Warranty BODY NUM DOORS: 2
6.5L V8SLE- Premium - Limited Lifetime Warranty BODY NUM DOORS: 2
5.7L V8SLT- Premium - Limited Lifetime Warranty BODY NUM DOORS: 2
6.5L V8SLT- Premium - Limited Lifetime Warranty BODY NUM DOORS: 2
Part Name: Shock AbsorberBrand: MonroePart#: 34763
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 34763

Monroe Shock Absorber 34763

TS

Description:

  • The Monroe® Gas-Magnum® truck shock absorber is designed for mid to full size, hard working pick-up trucks and vans. These units provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1 inch bore shocks, Monroe® Gas-Magnum® truck shocks work more efficiently with less effort.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • Full Displaced Valving: Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/8 inch Bore: Lower operating pressure than standard 1 inch bore units
  • 2 inch Reserve Tube: More fluid for more consistent performance.
  • Monroe Gas-Magnum Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.7/8 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 14.625
  • Extended Length: 23.875
  • Travel Length: 9.250
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Cylinder Included: No
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: Yes
  • Extended Hydraulic Lockout: No
  • Dust Shield Material: Metal
Rear
2
New
048598050038
$38.81
$32.99
$5.82 (15%)
281
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8Base- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLE- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLE- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLT- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLT- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: MonroePart#: 37085
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 37085

Monroe Shock Absorber 37085

TS

Description:

  • The Monroe® Sensa-Trac® truck shock absorber with PSD (position sensitive damping) and the Safe Tech™ system combines our exclusive precision tapered grooves in the pressure tube with application engineered valving and Fluon banded piston to improve the ride, handling, and safety characteristics of the vehicle. These features allow the Monroe® Sensa-Trac® truck shock absorber to adjust more rapidly to changing road and weight conditions than any other available shock absorber.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
  • Unique Groove Tube - PSD: Precision tapered grooves in the pressure tube perform like an additional stage of valving for optimum ride tuning.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/8 inch Bore: Lower operating pressure than standard 1 inch bore units
  • Monroe Sensa-Trac Light Truck Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.7/8 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 14.000
  • Extended Length: 22.375
  • Travel Length: 8.375
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: Yes
  • Extended Hydraulic Lockout: No
  • Dust Shield Material: Metal
Rear
2
New
048598155757
$38.94
$33.10
$5.84 (15%)
30
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8Base- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLE- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLE- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLT- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLT- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: SachsPart#: 310 287
1995 GMC Yukon Shock Absorber & Strut Assembly SACHS CLUTCHES 310 287

Sachs Shock Absorber 310 287

S2

Description:

  • Shock Absorber & Strut Assembly Sachs 310 287
Rear
2
New
$39.39
$33.48
$5.91 (15%)
6
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- OE Alternative; Advantage; Advantage Performance Upgrade BODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8Base- OE Alternative; Advantage; Advantage Performance Upgrade BODY NUM DOORS: 2, DRIVE TYPE: RWD
5.7L V8SLE- OE Alternative; Advantage; Advantage Performance Upgrade BODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8SLE- OE Alternative; Advantage; Advantage Performance Upgrade BODY NUM DOORS: 2, DRIVE TYPE: RWD
5.7L V8SLT- OE Alternative; Advantage; Advantage Performance Upgrade BODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8SLT- OE Alternative; Advantage; Advantage Performance Upgrade BODY NUM DOORS: 2, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: KYBPart#: KG54100
1995 GMC Yukon Shock Absorber & Strut Assembly KYB SHOCKS KG54100

KYB Shock Absorber KG54100

KY

Description:

  • High Pressure Monotube Gas Shock

Additional Details:

  • Extended Length (in): 22.95
  • Compressed Length (in): 14.21
  • Stroke (in): 8.74
  • Cover: Yes
  • Rebound Stop: No
  • Bump Stop: No
  • Upper Mount: E3(61.6x87x0)
  • Lower Mount: E2(14.6x41)
Rear
2
New
781552541004
$39.67
$33.72
$5.95 (15%)
108
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
5.7L V8BaseBODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8BaseBODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLEBODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLEBODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLTBODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLTBODY NUM DOORS: 4, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: KYBPart#: KG5480
1995 GMC Yukon Shock Absorber & Strut Assembly KYB SHOCKS KG5480

KYB Shock Absorber KG5480

KY

Description:

  • High Pressure Monotube Gas Shock

Additional Details:

  • Extended Length (in): 16.18
  • Compressed Length (in): 10.87
  • Stroke (in): 5.31
  • Cover: Yes
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: E2(12.8x62)
  • Lower Mount: E2(12.8x41.3)
Front
2
New
781552054801
$40.09
$34.08
$6.01 (15%)
252
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Recommended OE Replacement DRIVE TYPE: 4WD
6.5L V8Base- Recommended OE Replacement DRIVE TYPE: 4WD
5.7L V8SLE- Recommended OE Replacement DRIVE TYPE: 4WD
6.5L V8SLE- Recommended OE Replacement DRIVE TYPE: 4WD
5.7L V8SLT- Recommended OE Replacement DRIVE TYPE: 4WD
6.5L V8SLT- Recommended OE Replacement DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: KYBPart#: KG5478
1995 GMC Yukon Shock Absorber & Strut Assembly KYB SHOCKS KG5478

KYB Shock Absorber KG5478

KY

Description:

  • High Pressure Monotube Gas Shock

Additional Details:

  • Extended Length (in): 14.09
  • Compressed Length (in): 9.57
  • Stroke (in): 4.53
  • Cover: No
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: S1
  • Lower Mount: E3(55x77x10)
Front
2
New
781552054788
$40.11
$34.09
$6.02 (15%)
228
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
5.7L V8BaseDRIVE TYPE: RWD
6.5L V8BaseDRIVE TYPE: RWD
5.7L V8SLEDRIVE TYPE: RWD
6.5L V8SLEDRIVE TYPE: RWD
5.7L V8SLTDRIVE TYPE: RWD
6.5L V8SLTDRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: MonroePart#: 37086
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 37086

Monroe Shock Absorber 37086

TS

Description:

  • The Monroe® Sensa-Trac® truck shock absorber with PSD (position sensitive damping) and the Safe Tech™ system combines our exclusive precision tapered grooves in the pressure tube with application engineered valving and Fluon banded piston to improve the ride, handling, and safety characteristics of the vehicle. These features allow the Monroe® Sensa-Trac® truck shock absorber to adjust more rapidly to changing road and weight conditions than any other available shock absorber.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
  • Unique Groove Tube - PSD: Precision tapered grooves in the pressure tube perform like an additional stage of valving for optimum ride tuning.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/8 inch Bore: Lower operating pressure than standard 1 inch bore units
  • Monroe Sensa-Trac Light Truck Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.7/8 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 14.625
  • Extended Length: 23.750
  • Travel Length: 9.125
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: Yes
  • Extended Hydraulic Lockout: No
  • Dust Shield Material: Metal
Rear
2
New
048598155764
$40.21
$34.18
$6.03 (15%)
130
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8Base- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLE- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLE- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLT- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLT- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: MonroePart#: 37130
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 37130

Monroe Shock Absorber 37130

TS

Description:

  • The Monroe® Sensa-Trac® truck shock absorber with PSD (position sensitive damping) and the Safe Tech™ system combines our exclusive precision tapered grooves in the pressure tube with application engineered valving and Fluon banded piston to improve the ride, handling, and safety characteristics of the vehicle. These features allow the Monroe® Sensa-Trac® truck shock absorber to adjust more rapidly to changing road and weight conditions than any other available shock absorber.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
  • Unique Groove Tube - PSD: Precision tapered grooves in the pressure tube perform like an additional stage of valving for optimum ride tuning.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/8 inch Bore: Lower operating pressure than standard 1 inch bore units
  • Monroe Sensa-Trac Light Truck Shock Absorber

Additional Details:

  • Upper Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 2.7/16 Sleeve OAL
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 11.750
  • Extended Length: 16.000
  • Travel Length: 4.250
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: Yes
  • Extended Hydraulic Lockout: No
  • Dust Shield Material: Metal
Front
2
New
048598156204
$40.82
$34.70
$6.12 (15%)
141
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
6.5L V8Base- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
5.7L V8SLE- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
6.5L V8SLE- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
5.7L V8SLT- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
6.5L V8SLT- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: MonroePart#: 911086
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 911086

Monroe Shock Absorber 911086

TS

Description:

  • The Monroe Reflex® truck shock absorber with the patented ASD Technology combines specially tuned valving with a Fluon banded piston. The ASD valve has the ability to sense acceleration to improve the handling, safety, and overall ride characteristics of sport-utility vehicles, mini-vans and light trucks. The ASD base valve will sense a bump in the road and automatically adjust the shock to absorb the impact, leaving the shock with greater control when it is needed. The features of the Monroe® Reflex® truck shock absorber make it the superior shock for improved handling, safety, and comfort in all road conditions.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • 2-1/4 inch or 2 inch Diameter Reserve Tube: Allows more fluid carrying capacity for a cooler running unit.
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • ASD Technology: Innovative valving provides greater control for handling, while improving ride comfort.
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/8 inch Bore: Lower operating pressure than standard 1 inch bore units
  • Monroe Reflex Light Truck Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.7/8 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 14.750
  • Extended Length: 23.750
  • Travel Length: 9.000
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: Yes
  • Extended Hydraulic Lockout: No
  • Dust Shield Material: Metal
Rear
2
New
048598840028
$43.39
$36.88
$6.51 (15%)
204
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8Base- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLE- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLE- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLT- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLT- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: MonroePart#: 37087
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 37087

Monroe Shock Absorber 37087

TS

Description:

  • The Monroe® Sensa-Trac® truck shock absorber with PSD (position sensitive damping) and the Safe Tech™ system combines our exclusive precision tapered grooves in the pressure tube with application engineered valving and Fluon banded piston to improve the ride, handling, and safety characteristics of the vehicle. These features allow the Monroe® Sensa-Trac® truck shock absorber to adjust more rapidly to changing road and weight conditions than any other available shock absorber.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
  • Unique Groove Tube - PSD: Precision tapered grooves in the pressure tube perform like an additional stage of valving for optimum ride tuning.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/8 inch Bore: Lower operating pressure than standard 1 inch bore units
  • Monroe Sensa-Trac Light Truck Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.7/8 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 15.375
  • Extended Length: 25.250
  • Travel Length: 9.875
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: Yes
  • Extended Hydraulic Lockout: No
  • Dust Shield Material: Metal
Rear
2
New
048598155771
$43.73
$37.17
$6.56 (15%)
27
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Premium - Limited Lifetime Warranty BODY NUM DOORS: 2
6.5L V8Base- Premium - Limited Lifetime Warranty BODY NUM DOORS: 2
5.7L V8SLE- Premium - Limited Lifetime Warranty BODY NUM DOORS: 2
6.5L V8SLE- Premium - Limited Lifetime Warranty BODY NUM DOORS: 2
5.7L V8SLT- Premium - Limited Lifetime Warranty BODY NUM DOORS: 2
6.5L V8SLT- Premium - Limited Lifetime Warranty BODY NUM DOORS: 2
Part Name: Shock AbsorberBrand: MonroePart#: 911043
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 911043

Monroe Shock Absorber 911043

TS

Description:

  • The Monroe Reflex® truck shock absorber with the patented ASD Technology combines specially tuned valving with a Fluon banded piston. The ASD valve has the ability to sense acceleration to improve the handling, safety, and overall ride characteristics of sport-utility vehicles, mini-vans and light trucks. The ASD base valve will sense a bump in the road and automatically adjust the shock to absorb the impact, leaving the shock with greater control when it is needed. The features of the Monroe® Reflex® truck shock absorber make it the superior shock for improved handling, safety, and comfort in all road conditions.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • 2-1/4 inch or 2 inch Diameter Reserve Tube: Allows more fluid carrying capacity for a cooler running unit.
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • ASD Technology: Innovative valving provides greater control for handling, while improving ride comfort.
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/8 inch Bore: Lower operating pressure than standard 1 inch bore units
  • Monroe Reflex Light Truck Shock Absorber

Additional Details:

  • Upper Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 2.7/16 Sleeve OAL
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 11.250
  • Extended Length: 16.500
  • Travel Length: 5.250
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: Yes
  • Extended Hydraulic Lockout: No
  • Dust Shield Material: Metal
Front
2
New
048598840011
$43.95
$37.36
$6.59 (15%)
65
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
6.5L V8Base- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
5.7L V8SLE- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
6.5L V8SLE- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
5.7L V8SLT- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
6.5L V8SLT- Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: KYBPart#: KG54101
1995 GMC Yukon Shock Absorber & Strut Assembly KYB SHOCKS KG54101

KYB Shock Absorber KG54101

KY

Description:

  • High Pressure Monotube Gas Shock

Additional Details:

  • Extended Length (in): 24.49
  • Compressed Length (in): 14.96
  • Stroke (in): 9.53
  • Cover: Yes
  • Rebound Stop: No
  • Bump Stop: No
  • Upper Mount: E3(61.6x87x0)
  • Lower Mount: E2(14.6x41)
Rear
2
New
781552541011
$44.69
$37.99
$6.70 (15%)
102
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Recommended OE Replacement BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8Base- Recommended OE Replacement BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLE- Recommended OE Replacement BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLE- Recommended OE Replacement BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLT- Recommended OE Replacement BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLT- Recommended OE Replacement BODY NUM DOORS: 4, DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: MonroePart#: 34983
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 34983

Monroe Shock Absorber 34983

TS

Description:

  • The Monroe® Gas-Magnum® truck shock absorber is designed for mid to full size, hard working pick-up trucks and vans. These units provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1 inch bore shocks, Monroe® Gas-Magnum® truck shocks work more efficiently with less effort.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • Full Displaced Valving: Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/8 inch Bore: Lower operating pressure than standard 1 inch bore units
  • 2 inch Reserve Tube: More fluid for more consistent performance.
  • Monroe Gas-Magnum Shock Absorber

Additional Details:

  • Upper Mounting Code: Stem Mount - 2.3/8 Stem Length X 3/8-16 Thread Pitch
  • Lower Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.1/2 Pin Length (Hole Center to Center)
  • Compressed Length: 9.500
  • Extended Length: 13.750
  • Travel Length: 4.250
  • Dust Shield: No
  • Parts Pack(s): P1134
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: Yes
  • Extended Hydraulic Lockout: No
Front
2
New
048598049612
$44.72
$38.01
$6.71 (15%)
206
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
6.5L V8Base- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
5.7L V8SLE- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
6.5L V8SLE- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
5.7L V8SLT- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
6.5L V8SLT- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: KYBPart#: KG5479
1995 GMC Yukon Shock Absorber & Strut Assembly KYB SHOCKS KG5479

KYB Shock Absorber KG5479

KY

Description:

  • High Pressure Monotube Gas Shock

Additional Details:

  • Extended Length (in): 26.5
  • Compressed Length (in): 16.06
  • Stroke (in): 10.43
  • Cover: Yes
  • Rebound Stop: No
  • Bump Stop: No
  • Upper Mount: E3(61.6x87x0)
  • Lower Mount: E2(14.6x42)
Rear
2
New
781552054795
$46.68
$39.68
$7.00 (15%)
134
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
5.7L V8BaseBODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8BaseBODY NUM DOORS: 2, DRIVE TYPE: RWD
5.7L V8SLEBODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8SLEBODY NUM DOORS: 2, DRIVE TYPE: RWD
5.7L V8SLTBODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8SLTBODY NUM DOORS: 2, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: MonroePart#: 37050
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 37050

Monroe Shock Absorber 37050

TS

Description:

  • The Monroe® Sensa-Trac® truck shock absorber with PSD (position sensitive damping) and the Safe Tech™ system combines our exclusive precision tapered grooves in the pressure tube with application engineered valving and Fluon banded piston to improve the ride, handling, and safety characteristics of the vehicle. These features allow the Monroe® Sensa-Trac® truck shock absorber to adjust more rapidly to changing road and weight conditions than any other available shock absorber.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
  • Unique Groove Tube - PSD: Precision tapered grooves in the pressure tube perform like an additional stage of valving for optimum ride tuning.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/8 inch Bore: Lower operating pressure than standard 1 inch bore units
  • Monroe Sensa-Trac Light Truck Shock Absorber

Additional Details:

  • Upper Mounting Code: Stem Mount - 2.3/8 Stem Length X 3/8-16 Thread Pitch
  • Lower Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.1/2 Pin Length (Hole Center to Center)
  • Compressed Length: 9.500
  • Extended Length: 13.750
  • Travel Length: 4.250
  • Dust Shield: No
  • Parts Pack(s): P1134
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: Yes
  • Extended Hydraulic Lockout: No
Front
2
New
048598155405
$46.75
$39.74
$7.01 (15%)
35
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
6.5L V8Base- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
5.7L V8SLE- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
6.5L V8SLE- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
5.7L V8SLT- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
6.5L V8SLT- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: MonroePart#: 911050
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 911050

Monroe Shock Absorber 911050

TS

Description:

  • The Monroe Reflex® truck shock absorber with the patented ASD Technology combines specially tuned valving with a Fluon banded piston. The ASD valve has the ability to sense acceleration to improve the handling, safety, and overall ride characteristics of sport-utility vehicles, mini-vans and light trucks. The ASD base valve will sense a bump in the road and automatically adjust the shock to absorb the impact, leaving the shock with greater control when it is needed. The features of the Monroe® Reflex® truck shock absorber make it the superior shock for improved handling, safety, and comfort in all road conditions.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • 2-1/4 inch or 2 inch Diameter Reserve Tube: Allows more fluid carrying capacity for a cooler running unit.
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • ASD Technology: Innovative valving provides greater control for handling, while improving ride comfort.
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/8 inch Bore: Lower operating pressure than standard 1 inch bore units
  • Monroe Reflex Light Truck Shock Absorber

Additional Details:

  • Upper Mounting Code: Stem Mount - 2.3/8 Stem Length X 3/8-16 Thread Pitch
  • Lower Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.1/2 Pin Length (Hole Center to Center)
  • Compressed Length: 9.500
  • Extended Length: 13.750
  • Travel Length: 4.250
  • Dust Shield: No
  • Parts Pack(s): P1134
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: Yes
  • Extended Hydraulic Lockout: No
Front
2
New
048598840103
$50.31
$42.76
$7.55 (15%)
35
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
6.5L V8Base- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
5.7L V8SLE- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
6.5L V8SLE- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
5.7L V8SLT- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
6.5L V8SLT- Premium - Limited Lifetime Warranty DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: MonroePart#: 911085
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 911085

Monroe Shock Absorber 911085

TS

Description:

  • The Monroe Reflex® truck shock absorber with the patented ASD Technology combines specially tuned valving with a Fluon banded piston. The ASD valve has the ability to sense acceleration to improve the handling, safety, and overall ride characteristics of sport-utility vehicles, mini-vans and light trucks. The ASD base valve will sense a bump in the road and automatically adjust the shock to absorb the impact, leaving the shock with greater control when it is needed. The features of the Monroe® Reflex® truck shock absorber make it the superior shock for improved handling, safety, and comfort in all road conditions.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • 2-1/4 inch or 2 inch Diameter Reserve Tube: Allows more fluid carrying capacity for a cooler running unit.
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • ASD Technology: Innovative valving provides greater control for handling, while improving ride comfort.
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 1-3/8 inch Bore: Lower operating pressure than standard 1 inch bore units
  • Monroe Reflex Light Truck Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.7/8 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 14.000
  • Extended Length: 22.375
  • Travel Length: 8.375
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: Yes
  • Extended Hydraulic Lockout: No
  • Dust Shield Material: Metal
Rear
2
New
048598840134
$51.39
$43.68
$7.71 (15%)
148
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8Base- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLE- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLE- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLT- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLT- Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: MonroePart#: 911526
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 911526

Monroe Shock Absorber 911526

TS

Description:

  • Monroe® Reflex® monotube shocks are specifically engineered to provide better handling, control and performance for light trucks and SUV's. These shocks feature a high-pressure gas charge that separates the unit internal oil and nitrogen to provide additional spring rate, helping to maximize damping efficiency and control. To further enhance ride control characteristics, Monroe® Reflex® monotube shocks include a hydraulic lockout to cushion the impact as the vehicle suspension is fully extended.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • High Pressure Nitrogen Gas Charged: High-pressure charge (240-260 PSI) provides a quicker response for excellent vehicle control
  • Hydraulic Lockout: Patented unique hydraulic lock-out isolates impact at the limits of suspension travel
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Free Floating Dividing Piston: Separates shock fluid from high-pressure gas charge.
  • Shock Housing: High strength to resist damage and provide longer service life.
  • Nitrocarburized Rod: For long service life
  • Monroe Reflex Monotube Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.7/8 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 14.750
  • Extended Length: 23.750
  • Travel Length: 9.000
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Extended Hydraulic Lockout: No
  • Extended Bumper Stop: No
  • Compressed Bumper Stop: No
  • Dust Shield Material: Rubber
Rear
2
New
048598034762
$57.29
$48.70
$8.59 (15%)
6
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8Base- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLE- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLE- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLT- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLT- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty BODY NUM DOORS: 4, DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: KYBPart#: 565087
1995 GMC Yukon Shock Absorber & Strut Assembly KYB SHOCKS 565087

KYB Shock Absorber 565087

KY

Description:

  • High Pressure Monotube Gas Shock

Additional Details:

  • Extended Length (in): 26.22
  • Compressed Length (in): 16.57
  • Stroke (in): 9.65
  • Cover: Yes
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: E3(61.6x87x0)
  • Lower Mount: E2(14.6x41)
Rear
2
New
781552007364
$58.79
$49.97
$8.82 (15%)
64
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Lift Replacement Shocks - LIFTED - For Rancho # RSX17315 - Lift = 4-6 DRIVE TYPE: 4WD
6.5L V8Base- Lift Replacement Shocks - LIFTED - For Rancho # RSX17315 - Lift = 4-6 DRIVE TYPE: 4WD
5.7L V8SLE- Lift Replacement Shocks - LIFTED - For Rancho # RSX17315 - Lift = 4-6 DRIVE TYPE: 4WD
6.5L V8SLE- Lift Replacement Shocks - LIFTED - For Rancho # RSX17315 - Lift = 4-6 DRIVE TYPE: 4WD
5.7L V8SLT- Lift Replacement Shocks - LIFTED - For Rancho # RSX17315 - Lift = 4-6 DRIVE TYPE: 4WD
6.5L V8SLT- Lift Replacement Shocks - LIFTED - For Rancho # RSX17315 - Lift = 4-6 DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: KYBPart#: 565092
1995 GMC Yukon Shock Absorber & Strut Assembly KYB SHOCKS 565092

KYB Shock Absorber 565092

KY

Description:

  • High Pressure Monotube Gas Shock

Additional Details:

  • Extended Length (in): 20.62
  • Compressed Length (in): 13.54
  • Stroke (in): 7.08
  • Cover: Yes
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: E2(12.8x62)
  • Lower Mount: E2(12.8x41.3)
Front
2
New
781552007425
$58.79
$49.97
$8.82 (15%)
56
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Lift Replacement Shocks - LIFTED - For Rancho # RS9244 - Lift = 4-6 DRIVE TYPE: 4WD
6.5L V8Base- Lift Replacement Shocks - LIFTED - For Rancho # RS9244 - Lift = 4-6 DRIVE TYPE: 4WD
5.7L V8SLE- Lift Replacement Shocks - LIFTED - For Rancho # RS9244 - Lift = 4-6 DRIVE TYPE: 4WD
6.5L V8SLE- Lift Replacement Shocks - LIFTED - For Rancho # RS9244 - Lift = 4-6 DRIVE TYPE: 4WD
5.7L V8SLT- Lift Replacement Shocks - LIFTED - For Rancho # RS9244 - Lift = 4-6 DRIVE TYPE: 4WD
6.5L V8SLT- Lift Replacement Shocks - LIFTED - For Rancho # RS9244 - Lift = 4-6 DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: KYBPart#: 565061
1995 GMC Yukon Shock Absorber & Strut Assembly KYB SHOCKS 565061

KYB Shock Absorber 565061

KY

Description:

  • High Pressure Monotube Gas Shock

Additional Details:

  • Extended Length (in): 25.91
  • Compressed Length (in): 16.3
  • Stroke (in): 9.61
  • Cover: Yes
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: E3(61.6x87x0)
  • Lower Mount: E2(14.6x41)
Rear
2
New
781552002802
$58.79
$49.97
$8.82 (15%)
101
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
5.7L V8BaseBODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8BaseBODY NUM DOORS: 2, DRIVE TYPE: RWD
5.7L V8SLEBODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8SLEBODY NUM DOORS: 2, DRIVE TYPE: RWD
5.7L V8SLTBODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8SLTBODY NUM DOORS: 2, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: KYBPart#: 565062
1995 GMC Yukon Shock Absorber & Strut Assembly KYB SHOCKS 565062

KYB Shock Absorber 565062

KY

Description:

  • High Pressure Monotube Gas Shock

Additional Details:

  • Extended Length (in): 15.59
  • Compressed Length (in): 10.87
  • Stroke (in): 4.72
  • Cover: Yes
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: E2(12.8x62)
  • Lower Mount: E2(12.8x41.3)
Front
2
New
781552003113
$58.79
$49.97
$8.82 (15%)
154
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Standard Non-Lifted Suspensions DRIVE TYPE: 4WD
6.5L V8Base- Standard Non-Lifted Suspensions DRIVE TYPE: 4WD
5.7L V8SLE- Standard Non-Lifted Suspensions DRIVE TYPE: 4WD
6.5L V8SLE- Standard Non-Lifted Suspensions DRIVE TYPE: 4WD
5.7L V8SLT- Standard Non-Lifted Suspensions DRIVE TYPE: 4WD
6.5L V8SLT- Standard Non-Lifted Suspensions DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: KYBPart#: 565073
1995 GMC Yukon Shock Absorber & Strut Assembly KYB SHOCKS 565073

KYB Shock Absorber 565073

KY

Description:

  • High Pressure Monotube Gas Shock

Additional Details:

  • Extended Length (in): 18.58
  • Compressed Length (in): 12.8
  • Stroke (in): 5.79
  • Cover: Yes
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: E2(12.8x62)
  • Lower Mount: E2(12.8x41.3)
Front
2
New
781552003984
$58.79
$49.97
$8.82 (15%)
70
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Lift Replacement Shocks - LIFTED - Lift = 0-3 BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8Base- Lift Replacement Shocks - LIFTED - Lift = 0-3 BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLE- Lift Replacement Shocks - LIFTED - Lift = 0-3 BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLE- Lift Replacement Shocks - LIFTED - Lift = 0-3 BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLT- Lift Replacement Shocks - LIFTED - Lift = 0-3 BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLT- Lift Replacement Shocks - LIFTED - Lift = 0-3 BODY NUM DOORS: 4, DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: KYBPart#: 565060
1995 GMC Yukon Shock Absorber & Strut Assembly KYB SHOCKS 565060

KYB Shock Absorber 565060

KY

Description:

  • High Pressure Monotube Gas Shock

Additional Details:

  • Extended Length (in): 14.13
  • Compressed Length (in): 9.69
  • Stroke (in): 4.45
  • Cover: No
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: S1
  • Lower Mount: E3(55x77x10)
Front
2
New
781552003007
$58.79
$49.97
$8.82 (15%)
148
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- (Lowered Suspensions) - Lowered 2 Inches BODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8Base- (Lowered Suspensions) - Lowered 2 Inches BODY NUM DOORS: 2, DRIVE TYPE: RWD
5.7L V8SLE- (Lowered Suspensions) - Lowered 2 Inches BODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8SLE- (Lowered Suspensions) - Lowered 2 Inches BODY NUM DOORS: 2, DRIVE TYPE: RWD
5.7L V8SLT- (Lowered Suspensions) - Lowered 2 Inches BODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8SLT- (Lowered Suspensions) - Lowered 2 Inches BODY NUM DOORS: 2, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: KYBPart#: 565086
1995 GMC Yukon Shock Absorber & Strut Assembly KYB SHOCKS 565086

KYB Shock Absorber 565086

KY

Description:

  • High Pressure Monotube Gas Shock

Additional Details:

  • Extended Length (in): 21.49
  • Compressed Length (in): 14.01
  • Stroke (in): 7.48
  • Cover: Yes
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: E2(12.8x62)
  • Lower Mount: E2(12.8x41.3)
Front
2
New
781552007357
$58.79
$49.97
$8.82 (15%)
54
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Lift Replacement Shocks - LIFTED - For Rancho # RSX17316 - Lift = 4-6 DRIVE TYPE: 4WD
6.5L V8Base- Lift Replacement Shocks - LIFTED - For Rancho # RSX17316 - Lift = 4-6 DRIVE TYPE: 4WD
5.7L V8SLE- Lift Replacement Shocks - LIFTED - For Rancho # RSX17316 - Lift = 4-6 DRIVE TYPE: 4WD
6.5L V8SLE- Lift Replacement Shocks - LIFTED - For Rancho # RSX17316 - Lift = 4-6 DRIVE TYPE: 4WD
5.7L V8SLT- Lift Replacement Shocks - LIFTED - For Rancho # RSX17316 - Lift = 4-6 DRIVE TYPE: 4WD
6.5L V8SLT- Lift Replacement Shocks - LIFTED - For Rancho # RSX17316 - Lift = 4-6 DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: KYBPart#: 565033
1995 GMC Yukon Shock Absorber & Strut Assembly KYB SHOCKS 565033

KYB Shock Absorber 565033

KY

Description:

  • High Pressure Monotube Gas Shock

Additional Details:

  • Extended Length (in): 22.36
  • Compressed Length (in): 14.41
  • Stroke (in): 7.95
  • Cover: Yes
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: E3(61.6x87x0)
  • Lower Mount: E2(14.6x41)
Rear
2
New
781552002857
$58.79
$49.97
$8.82 (15%)
164
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
5.7L V8BaseBODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8BaseBODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLEBODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLEBODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLTBODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLTBODY NUM DOORS: 4, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: MonroePart#: 911511
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 911511

Monroe Shock Absorber 911511

TS

Description:

  • Monroe® Reflex® monotube shocks are specifically engineered to provide better handling, control and performance for light trucks and SUV's. These shocks feature a high-pressure gas charge that separates the unit internal oil and nitrogen to provide additional spring rate, helping to maximize damping efficiency and control. To further enhance ride control characteristics, Monroe® Reflex® monotube shocks include a hydraulic lockout to cushion the impact as the vehicle suspension is fully extended.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • High Pressure Nitrogen Gas Charged: High-pressure charge (240-260 PSI) provides a quicker response for excellent vehicle control
  • Hydraulic Lockout: Patented unique hydraulic lock-out isolates impact at the limits of suspension travel
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Free Floating Dividing Piston: Separates shock fluid from high-pressure gas charge.
  • Shock Housing: High strength to resist damage and provide longer service life.
  • Nitrocarburized Rod: For long service life
  • Monroe Reflex Monotube Shock Absorber

Additional Details:

  • Upper Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 2.7/16 Sleeve OAL
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 11.375
  • Extended Length: 16.625
  • Travel Length: 5.250
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Extended Hydraulic Lockout: No
  • Extended Bumper Stop: No
  • Compressed Bumper Stop: No
  • Dust Shield Material: Rubber
Front
2
New
048598034618
$59.78
$50.81
$8.97 (15%)
64
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
6.5L V8Base- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
5.7L V8SLE- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
6.5L V8SLE- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
5.7L V8SLT- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
6.5L V8SLT- For Performance - Mono-Tube; Premium - Limited Lifetime Warranty DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: RanchoPart#: RS5001
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE RS5001

Rancho Shock Absorber RS5001

TS

Description:

  • The shock that started it all! Rancho® RS5000™ series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000™ is ideal for on and off-road use, at an affordable price. Covered by Rancho®'s limited lifetime warranty.
  • 1 3/8-in. (35mm) diameter piston (select applications) - Ensures performance in any environment
  • 5/8-in. (16mm) diameter piston rod (select applications) - Adds strength and durability
  • Ten-stage velocity sensitive valving - Provides tuning specific for each vehicle
  • Protective boot included - Protects the shock rod and oil seal
  • Limited Lifetime Warranty - Guarantees your investment
  • Rancho RS5000 Shock Absorber

Additional Details:

  • Upper Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.3/8 Sleeve OAL
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.3/8 Sleeve OAL
  • Compressed Length: 13.250
  • Extended Length: 21.010
  • Travel Length: 7.760
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Cylinder Included: No
  • Reserve Tube Diameter: 2.188
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front
2
New
039703500104
$50.99
What Is MAP Price?
1
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- w/ 2 1/2 - 4 Front Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8Base- w/ 2 1/2 - 4 Front Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLE- w/ 2 1/2 - 4 Front Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLE- w/ 2 1/2 - 4 Front Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLT- w/ 2 1/2 - 4 Front Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLT- w/ 2 1/2 - 4 Front Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: RanchoPart#: RS5128
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE RS5128

Rancho Shock Absorber RS5128

TS

Description:

  • The shock that started it all! Rancho® RS5000™ series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000™ is ideal for on and off-road use, at an affordable price. Covered by Rancho®'s limited lifetime warranty.
  • 1 3/8-in. (35mm) diameter piston (select applications) - Ensures performance in any environment
  • 5/8-in. (16mm) diameter piston rod (select applications) - Adds strength and durability
  • Ten-stage velocity sensitive valving - Provides tuning specific for each vehicle
  • Protective boot included - Protects the shock rod and oil seal
  • Limited Lifetime Warranty - Guarantees your investment
  • Rancho RS5000 Shock Absorber

Additional Details:

  • Upper Mounting Code: Stem Mount - 2.3/8 Stem Length X 3/8-16 Thread Pitch
  • Lower Mounting Code: Cross Pin Mount - Closed Ended, 3/8 Hole ID (Both Ends) X 2.3/4 Pin Length (Hole Center to Center)
  • Compressed Length: 13.050
  • Extended Length: 21.030
  • Travel Length: 7.980
  • Dust Shield: Yes
  • Parts Pack(s): P1136 & P941
  • Cylinder Included: No
  • Reserve Tube Diameter: 2.188
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front
2
New
039703512800
$50.99
What Is MAP Price?
14
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- w/ 4 Front Raised Height; w/ Rancho RS6267 System DRIVE TYPE: RWD
6.5L V8Base- w/ 4 Front Raised Height; w/ Rancho RS6267 System DRIVE TYPE: RWD
5.7L V8SLE- w/ 4 Front Raised Height; w/ Rancho RS6267 System DRIVE TYPE: RWD
6.5L V8SLE- w/ 4 Front Raised Height; w/ Rancho RS6267 System DRIVE TYPE: RWD
5.7L V8SLT- w/ 4 Front Raised Height; w/ Rancho RS6267 System DRIVE TYPE: RWD
6.5L V8SLT- w/ 4 Front Raised Height; w/ Rancho RS6267 System DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: RanchoPart#: RS5150
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE RS5150

Rancho Shock Absorber RS5150

TS

Description:

  • The shock that started it all! Rancho® RS5000™ series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000™ is ideal for on and off-road use, at an affordable price. Covered by Rancho®'s limited lifetime warranty.
  • 1 3/8-in. (35mm) diameter piston (select applications) - Ensures performance in any environment
  • 5/8-in. (16mm) diameter piston rod (select applications) - Adds strength and durability
  • Ten-stage velocity sensitive valving - Provides tuning specific for each vehicle
  • Protective boot included - Protects the shock rod and oil seal
  • Limited Lifetime Warranty - Guarantees your investment
  • Rancho RS5000 Shock Absorber

Additional Details:

  • Upper Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 2.7/16 Sleeve OAL
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 11.563
  • Extended Length: 16.688
  • Travel Length: 5.125
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Cylinder Included: No
  • Reserve Tube Diameter: 2.188
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front
2
New
039703515009
$50.99
What Is MAP Price?
12
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- w/ 0 - 1 Front Raised Height; w/o Rancho System DRIVE TYPE: 4WD
6.5L V8Base- w/ 0 - 1 Front Raised Height; w/o Rancho System DRIVE TYPE: 4WD
5.7L V8SLE- w/ 0 - 1 Front Raised Height; w/o Rancho System DRIVE TYPE: 4WD
6.5L V8SLE- w/ 0 - 1 Front Raised Height; w/o Rancho System DRIVE TYPE: 4WD
5.7L V8SLT- w/ 0 - 1 Front Raised Height; w/o Rancho System DRIVE TYPE: 4WD
6.5L V8SLT- w/ 0 - 1 Front Raised Height; w/o Rancho System DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: RanchoPart#: RS5193
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE RS5193

Rancho Shock Absorber RS5193

TS

Description:

  • The shock that started it all! Rancho® RS5000™ series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000™ is ideal for on and off-road use, at an affordable price. Covered by Rancho®'s limited lifetime warranty.
  • 1 3/8-in. (35mm) diameter piston (select applications) - Ensures performance in any environment
  • 5/8-in. (16mm) diameter piston rod (select applications) - Adds strength and durability
  • Ten-stage velocity sensitive valving - Provides tuning specific for each vehicle
  • Protective boot included - Protects the shock rod and oil seal
  • Limited Lifetime Warranty - Guarantees your investment
  • Rancho RS5000 Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 3/8 Hole ID (Both Ends) X 2.3/4 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 14.188
  • Extended Length: 23.000
  • Travel Length: 8.812
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Reserve Tube Diameter: 2.188
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Rear
2
New
039703519304
$50.99
What Is MAP Price?
1
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- w/ 0 Rear Raised Height BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8Base- w/ 0 Rear Raised Height BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLE- w/ 0 Rear Raised Height BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLE- w/ 0 Rear Raised Height BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLT- w/ 0 Rear Raised Height BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLT- w/ 0 Rear Raised Height BODY NUM DOORS: 4, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: RanchoPart#: RS5152
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE RS5152

Rancho Shock Absorber RS5152

TS

Description:

  • The shock that started it all! Rancho® RS5000™ series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000™ is ideal for on and off-road use, at an affordable price. Covered by Rancho®'s limited lifetime warranty.
  • 1 3/8-in. (35mm) diameter piston (select applications) - Ensures performance in any environment
  • 5/8-in. (16mm) diameter piston rod (select applications) - Adds strength and durability
  • Ten-stage velocity sensitive valving - Provides tuning specific for each vehicle
  • Protective boot included - Protects the shock rod and oil seal
  • Limited Lifetime Warranty - Guarantees your investment
  • Rancho RS5000 Shock Absorber

Additional Details:

  • Upper Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 2.7/16 Sleeve OAL
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.11/16 Sleeve OAL
  • Compressed Length: 11.563
  • Extended Length: 16.125
  • Travel Length: 4.562
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Cylinder Included: No
  • Reserve Tube Diameter: 2.188
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front
2
New
039703515207
$50.99
What Is MAP Price?
17
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- w/ 1 - 2 1/2 Front Raised Height; w/ Rancho RS6426 System; Do NOT Use w/ Aftermarket (Stamped Steel Housing) Ball Joints - Use Only w/ OE Style (Forged Housing) Upper Ball Joints; Not for use w/ Aftermarket Shock Spacers or Relocation Brackets DRIVE TYPE: 4WD
6.5L V8Base- w/ 1 - 2 1/2 Front Raised Height; w/ Rancho RS6426 System; Do NOT Use w/ Aftermarket (Stamped Steel Housing) Ball Joints - Use Only w/ OE Style (Forged Housing) Upper Ball Joints; Not for use w/ Aftermarket Shock Spacers or Relocation Brackets DRIVE TYPE: 4WD
5.7L V8SLE- w/ 1 - 2 1/2 Front Raised Height; w/ Rancho RS6426 System; Do NOT Use w/ Aftermarket (Stamped Steel Housing) Ball Joints - Use Only w/ OE Style (Forged Housing) Upper Ball Joints; Not for use w/ Aftermarket Shock Spacers or Relocation Brackets DRIVE TYPE: 4WD
6.5L V8SLE- w/ 1 - 2 1/2 Front Raised Height; w/ Rancho RS6426 System; Do NOT Use w/ Aftermarket (Stamped Steel Housing) Ball Joints - Use Only w/ OE Style (Forged Housing) Upper Ball Joints; Not for use w/ Aftermarket Shock Spacers or Relocation Brackets DRIVE TYPE: 4WD
5.7L V8SLT- w/ 1 - 2 1/2 Front Raised Height; w/ Rancho RS6426 System; Do NOT Use w/ Aftermarket (Stamped Steel Housing) Ball Joints - Use Only w/ OE Style (Forged Housing) Upper Ball Joints; Not for use w/ Aftermarket Shock Spacers or Relocation Brackets DRIVE TYPE: 4WD
6.5L V8SLT- w/ 1 - 2 1/2 Front Raised Height; w/ Rancho RS6426 System; Do NOT Use w/ Aftermarket (Stamped Steel Housing) Ball Joints - Use Only w/ OE Style (Forged Housing) Upper Ball Joints; Not for use w/ Aftermarket Shock Spacers or Relocation Brackets DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: RanchoPart#: RS5124
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE RS5124

Rancho Shock Absorber RS5124

TS

Description:

  • The shock that started it all! Rancho® RS5000™ series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000™ is ideal for on and off-road use, at an affordable price. Covered by Rancho®'s limited lifetime warranty.
  • 1 3/8-in. (35mm) diameter piston (select applications) - Ensures performance in any environment
  • 5/8-in. (16mm) diameter piston rod (select applications) - Adds strength and durability
  • Ten-stage velocity sensitive valving - Provides tuning specific for each vehicle
  • Protective boot included - Protects the shock rod and oil seal
  • Limited Lifetime Warranty - Guarantees your investment
  • Rancho RS5000 Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 3/8 Hole ID (Both Ends) X 2.3/4 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 14.688
  • Extended Length: 23.500
  • Travel Length: 8.812
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Cylinder Included: No
  • Reserve Tube Diameter: 2.188
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Rear
2
New
039703512404
$50.99
What Is MAP Price?
18
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- w/ 0 Rear Raised Height BODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8Base- w/ 0 Rear Raised Height BODY NUM DOORS: 2, DRIVE TYPE: RWD
5.7L V8SLE- w/ 0 Rear Raised Height BODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8SLE- w/ 0 Rear Raised Height BODY NUM DOORS: 2, DRIVE TYPE: RWD
5.7L V8SLT- w/ 0 Rear Raised Height BODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8SLT- w/ 0 Rear Raised Height BODY NUM DOORS: 2, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: RanchoPart#: RS5190
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE RS5190

Rancho Shock Absorber RS5190

TS

Description:

  • The shock that started it all! Rancho® RS5000™ series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000™ is ideal for on and off-road use, at an affordable price. Covered by Rancho®'s limited lifetime warranty.
  • 1 3/8-in. (35mm) diameter piston (select applications) - Ensures performance in any environment
  • 5/8-in. (16mm) diameter piston rod (select applications) - Adds strength and durability
  • Ten-stage velocity sensitive valving - Provides tuning specific for each vehicle
  • Protective boot included - Protects the shock rod and oil seal
  • Limited Lifetime Warranty - Guarantees your investment
  • Rancho RS5000 Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 3/8 Hole ID (Both Ends) X 2.3/4 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 16.000
  • Extended Length: 26.375
  • Travel Length: 10.375
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Reserve Tube Diameter: 2.188
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Rear
2
New
039703519007
$50.99
What Is MAP Price?
34
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- w/ 2 1/2 - 4 Rear Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8Base- w/ 2 1/2 - 4 Rear Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLE- w/ 2 1/2 - 4 Rear Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLE- w/ 2 1/2 - 4 Rear Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLT- w/ 2 1/2 - 4 Rear Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLT- w/ 2 1/2 - 4 Rear Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: RanchoPart#: RS5227
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE RS5227

Rancho Shock Absorber RS5227

TS

Description:

  • The shock that started it all! Rancho® RS5000™ series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000™ is ideal for on and off-road use, at an affordable price. Covered by Rancho®'s limited lifetime warranty.
  • 1 3/8-in. (35mm) diameter piston (select applications) - Ensures performance in any environment
  • 5/8-in. (16mm) diameter piston rod (select applications) - Adds strength and durability
  • Ten-stage velocity sensitive valving - Provides tuning specific for each vehicle
  • Protective boot included - Protects the shock rod and oil seal
  • Limited Lifetime Warranty - Guarantees your investment
  • Rancho RS5000 Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 3/8 Hole ID (Both Ends) X 2.3/4 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 17.500
  • Extended Length: 29.000
  • Travel Length: 11.500
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Reserve Tube Diameter: 2.188
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Rear
2
New
039703522700
$50.99
What Is MAP Price?
13
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- w/ Rancho RS6555 System; w/ 2 1/2 - 4 Rear Raised Height BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8Base- w/ Rancho RS6555 System; w/ 2 1/2 - 4 Rear Raised Height BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLE- w/ Rancho RS6555 System; w/ 2 1/2 - 4 Rear Raised Height BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLE- w/ Rancho RS6555 System; w/ 2 1/2 - 4 Rear Raised Height BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLT- w/ Rancho RS6555 System; w/ 2 1/2 - 4 Rear Raised Height BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLT- w/ Rancho RS6555 System; w/ 2 1/2 - 4 Rear Raised Height BODY NUM DOORS: 4, DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: KYBPart#: 565074
1995 GMC Yukon Shock Absorber & Strut Assembly KYB SHOCKS 565074

KYB Shock Absorber 565074

KY

Description:

  • High Pressure Monotube Gas Shock

Additional Details:

  • Extended Length (in): 26.38
  • Compressed Length (in): 16.73
  • Stroke (in): 9.65
  • Cover: Yes
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: E3(61.6x87x0)
  • Lower Mount: E2(14.6x41)
Rear
2
New
781552003991
$61.68
$52.43
$9.25 (15%)
40
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Lift Replacement Shocks - LIFTED - Lift = 0-3 BODY NUM DOORS: 2, DRIVE TYPE: 4WD
6.5L V8Base- Lift Replacement Shocks - LIFTED - Lift = 0-3 BODY NUM DOORS: 2, DRIVE TYPE: 4WD
5.7L V8SLE- Lift Replacement Shocks - LIFTED - Lift = 0-3 BODY NUM DOORS: 2, DRIVE TYPE: 4WD
6.5L V8SLE- Lift Replacement Shocks - LIFTED - Lift = 0-3 BODY NUM DOORS: 2, DRIVE TYPE: 4WD
5.7L V8SLT- Lift Replacement Shocks - LIFTED - Lift = 0-3 BODY NUM DOORS: 2, DRIVE TYPE: 4WD
6.5L V8SLT- Lift Replacement Shocks - LIFTED - Lift = 0-3 BODY NUM DOORS: 2, DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: MonroePart#: MA778
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE MA778

Monroe Shock Absorber MA778

TS

Description:

  • The Max-Air® shock absorber is ideal for vehicles that haul heavy loads or tow trailers. Designed to maintain level vehicle height, they can be inflated or deflated as needed...from 20 psi to 150 psi with the vehicle loaded. Capacity is limited by vehicle suspension, tires and transmission. See vehicle owner's manual for details.
  • Full Displaced Valving: Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
  • Lubricated Air Sleeve: Reduces friction for longer service life. Provides smoother operation during suspension movement.
  • 1/2 inch Piston Rod: Hardened and precision ground rod for consistent performance and long service life.
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Large Volume Air Chamber: Inflates up to 150 psi with vehicle loaded. Deflates for normal driving.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Special Air Fitting: Resists air leakage.
  • Monroe Max-Air Air Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.1/2 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 13.875
  • Extended Length: 22.875
  • Travel Length: 9.000
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Extended Hydraulic Lockout: No
  • Extended Bumper Stop: Yes
  • Compressed Bumper Stop: Yes
  • Dust Shield Material: Rubber
Rear
1
New
048598031679
$71.62
$60.88
$10.74 (15%)
4
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- For Towing Hauling; Use Monroe PN[AK18] to Replace Single Air Shock Fill System if Necessary; Use Monroe PN[AK64] to Add Separate L/R Air Shock Fill System if Desired BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8Base- For Towing Hauling; Use Monroe PN[AK18] to Replace Single Air Shock Fill System if Necessary; Use Monroe PN[AK64] to Add Separate L/R Air Shock Fill System if Desired BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLE- For Towing Hauling; Use Monroe PN[AK18] to Replace Single Air Shock Fill System if Necessary; Use Monroe PN[AK64] to Add Separate L/R Air Shock Fill System if Desired BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLE- For Towing Hauling; Use Monroe PN[AK18] to Replace Single Air Shock Fill System if Necessary; Use Monroe PN[AK64] to Add Separate L/R Air Shock Fill System if Desired BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLT- For Towing Hauling; Use Monroe PN[AK18] to Replace Single Air Shock Fill System if Necessary; Use Monroe PN[AK64] to Add Separate L/R Air Shock Fill System if Desired BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLT- For Towing Hauling; Use Monroe PN[AK18] to Replace Single Air Shock Fill System if Necessary; Use Monroe PN[AK64] to Add Separate L/R Air Shock Fill System if Desired BODY NUM DOORS: 4, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: MonroePart#: MA779
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE MA779

Monroe Shock Absorber MA779

TS

Description:

  • The Max-Air® shock absorber is ideal for vehicles that haul heavy loads or tow trailers. Designed to maintain level vehicle height, they can be inflated or deflated as needed...from 20 psi to 150 psi with the vehicle loaded. Capacity is limited by vehicle suspension, tires and transmission. See vehicle owner's manual for details.
  • Full Displaced Valving: Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
  • Lubricated Air Sleeve: Reduces friction for longer service life. Provides smoother operation during suspension movement.
  • 1/2 inch Piston Rod: Hardened and precision ground rod for consistent performance and long service life.
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Large Volume Air Chamber: Inflates up to 150 psi with vehicle loaded. Deflates for normal driving.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Special Air Fitting: Resists air leakage.
  • Monroe Max-Air Air Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.7/8 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 14.500
  • Extended Length: 23.750
  • Travel Length: 9.250
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Extended Hydraulic Lockout: No
  • Extended Bumper Stop: Yes
  • Compressed Bumper Stop: Yes
  • Dust Shield Material: Rubber
Rear
1
New
048598031693
$75.64
$64.29
$11.35 (15%)
7
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- For Towing Hauling; Use Monroe PN[AK18] to Replace Single Air Shock Fill System if Necessary; Use Monroe PN[AK64] to Add Separate L/R Air Shock Fill System if Desired BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8Base- For Towing Hauling; Use Monroe PN[AK18] to Replace Single Air Shock Fill System if Necessary; Use Monroe PN[AK64] to Add Separate L/R Air Shock Fill System if Desired BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLE- For Towing Hauling; Use Monroe PN[AK18] to Replace Single Air Shock Fill System if Necessary; Use Monroe PN[AK64] to Add Separate L/R Air Shock Fill System if Desired BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLE- For Towing Hauling; Use Monroe PN[AK18] to Replace Single Air Shock Fill System if Necessary; Use Monroe PN[AK64] to Add Separate L/R Air Shock Fill System if Desired BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLT- For Towing Hauling; Use Monroe PN[AK18] to Replace Single Air Shock Fill System if Necessary; Use Monroe PN[AK64] to Add Separate L/R Air Shock Fill System if Desired BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLT- For Towing Hauling; Use Monroe PN[AK18] to Replace Single Air Shock Fill System if Necessary; Use Monroe PN[AK64] to Add Separate L/R Air Shock Fill System if Desired BODY NUM DOORS: 4, DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: BilsteinPart#: 24-016988
1995 GMC Yukon Shock Absorber & Strut Assembly DRUMS/ROTORS 24-016988

Bilstein Shock Absorber 24-016988

B5

Description:

  • Bilstein 4600 Series Shock Absorbers and Struts are designed specifically to help your truck, van or SUV reach its pinnacle in ride performance and handling, while still providing the comfortable ride that has come to be expected from the name BILSTEIN. A 4600 Series equipped vehicle offers superior control compared to conventional alternatives, allowing you to keep cargo secure-from your kids to work equipment, mile after mile. Utilizing our patented design, the dampers allow the vehicle to glide over every type of road surface you may encounter while maintaining complete command at all times. These dampers are the least expensive and most effective upgrade to extend the service life of any vehicle out on the road today.
  • 46mm Monotube Shock Absorber

Additional Details:

  • Series: 4600 Series
  • Boot Included: Blue Straight
  • Internal Design: Monotube
  • Lower Mount Type: Eye 14.1mm
  • Upper Mount Type: Bar Pin
  • Finish: Yellow Paint
Rear
2
New
651860469584
$90.05
$76.54
$13.51 (15%)
10
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8SLT- Series: 4600 Series - Rear Lifted Height: 1 BODY NUM DOORS: 4, BODY TYPE: Sport Utility, DRIVE TYPE: RWD
6.5L V8SLT- Series: 4600 Series - Rear Lifted Height: 1 BODY NUM DOORS: 4, BODY TYPE: Sport Utility, DRIVE TYPE: RWD
5.7L V8SLE- Series: 4600 Series - Rear Lifted Height: 1 BODY NUM DOORS: 4, BODY TYPE: Sport Utility, DRIVE TYPE: RWD
6.5L V8SLE- Series: 4600 Series - Rear Lifted Height: 1 BODY NUM DOORS: 4, BODY TYPE: Sport Utility, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: BilsteinPart#: 24-025027
1995 GMC Yukon Shock Absorber & Strut Assembly DRUMS/ROTORS 24-025027

Bilstein Shock Absorber 24-025027

B5

Description:

  • Bilstein 4600 Series Shock Absorbers and Struts are designed specifically to help your truck, van or SUV reach its pinnacle in ride performance and handling, while still providing the comfortable ride that has come to be expected from the name BILSTEIN. A 4600 Series equipped vehicle offers superior control compared to conventional alternatives, allowing you to keep cargo secure-from your kids to work equipment, mile after mile. Utilizing our patented design, the dampers allow the vehicle to glide over every type of road surface you may encounter while maintaining complete command at all times. These dampers are the least expensive and most effective upgrade to extend the service life of any vehicle out on the road today.
  • 46mm Monotube Shock Absorber

Additional Details:

  • Series: 4600 Series
  • Boot Included: Blue Straight
  • Internal Design: Monotube
  • Lower Mount Type: Eye 14.1mm
  • Upper Mount Type: Bar Pin
  • Finish: Yellow Paint
Rear
2
New
651860451343
$90.05
$76.54
$13.51 (15%)
6
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Series: 4600 Series DRIVE TYPE: 4WD
6.5L V8Base- Series: 4600 Series DRIVE TYPE: 4WD
5.7L V8SLT- Series: 4600 Series DRIVE TYPE: 4WD
6.5L V8SLT- Series: 4600 Series DRIVE TYPE: 4WD
5.7L V8SLE- Series: 4600 Series DRIVE TYPE: 4WD
6.5L V8SLE- Series: 4600 Series DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: BilsteinPart#: 24-104050
1995 GMC Yukon Shock Absorber & Strut Assembly DRUMS/ROTORS 24-104050

Bilstein Shock Absorber 24-104050

B5

Description:

  • Bilstein 4600 Series Shock Absorbers and Struts are designed specifically to help your truck, van or SUV reach its pinnacle in ride performance and handling, while still providing the comfortable ride that has come to be expected from the name BILSTEIN. A 4600 Series equipped vehicle offers superior control compared to conventional alternatives, allowing you to keep cargo secure-from your kids to work equipment, mile after mile. Utilizing our patented design, the dampers allow the vehicle to glide over every type of road surface you may encounter while maintaining complete command at all times. These dampers are the least expensive and most effective upgrade to extend the service life of any vehicle out on the road today.
  • 46mm Monotube Shock Absorber

Additional Details:

  • Series: 4600 Series
  • Boot Included: Black Straight
  • Internal Design: Monotube
  • Lower Mount Type: Eye 12.75mm
  • Upper Mount Type: Eye 12.9mm
  • Finish: Yellow Paint
Front
2
New
651860470108
$90.05
$76.54
$13.51 (15%)
21
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- Series: 4600 Series DRIVE TYPE: 4WD
6.5L V8Base- Series: 4600 Series DRIVE TYPE: 4WD
5.7L V8SLT- Series: 4600 Series DRIVE TYPE: 4WD
6.5L V8SLT- Series: 4600 Series DRIVE TYPE: 4WD
5.7L V8SLE- Series: 4600 Series DRIVE TYPE: 4WD
6.5L V8SLE- Series: 4600 Series DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: BilsteinPart#: 24-021791
1995 GMC Yukon Shock Absorber & Strut Assembly DRUMS/ROTORS 24-021791

Bilstein Shock Absorber 24-021791

B5

Description:

  • Bilstein 4600 Series Shock Absorbers and Struts are designed specifically to help your truck, van or SUV reach its pinnacle in ride performance and handling, while still providing the comfortable ride that has come to be expected from the name BILSTEIN. A 4600 Series equipped vehicle offers superior control compared to conventional alternatives, allowing you to keep cargo secure-from your kids to work equipment, mile after mile. Utilizing our patented design, the dampers allow the vehicle to glide over every type of road surface you may encounter while maintaining complete command at all times. These dampers are the least expensive and most effective upgrade to extend the service life of any vehicle out on the road today.
  • 46mm Monotube Shock Absorber

Additional Details:

  • Series: 4600 Series
  • Boot Included: Blue Straight
  • Internal Design: Monotube
  • Lower Mount Type: Eye 14.1mm
  • Upper Mount Type: Bar Pin
  • Finish: Yellow Paint
Rear
2
New
651860420684
$90.05
$76.54
$13.51 (15%)
8
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8SLT- Series: 4600 Series BODY NUM DOORS: 4, BODY TYPE: Sport Utility, DRIVE TYPE: 4WD, FRONT SPRING TYPE: Torsion Bar, MFR BODY CODE: K10706, REAR SPRING TYPE: Leaf
6.5L V8SLT- Series: 4600 Series BODY NUM DOORS: 4, BODY TYPE: Sport Utility, DRIVE TYPE: 4WD, FRONT SPRING TYPE: Torsion Bar, MFR BODY CODE: K10706, REAR SPRING TYPE: Leaf
5.7L V8SLE- Series: 4600 Series BODY NUM DOORS: 4, BODY TYPE: Sport Utility, DRIVE TYPE: 4WD, FRONT SPRING TYPE: Torsion Bar, MFR BODY CODE: K10706, REAR SPRING TYPE: Leaf
6.5L V8SLE- Series: 4600 Series BODY NUM DOORS: 4, BODY TYPE: Sport Utility, DRIVE TYPE: 4WD, FRONT SPRING TYPE: Torsion Bar, MFR BODY CODE: K10706, REAR SPRING TYPE: Leaf
Part Name: Shock AbsorberBrand: RanchoPart#: RS7128
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE RS7128

Rancho Shock Absorber RS7128

TS

Description:

  • Specifically engineered for high center of gravity light trucks and SUV’s to provide the handling, control and performance expected from Rancho® RS7000MT shock absorbers. These shocks provide enhanced stability over stock twin tubes by reducing body roll in evasive maneuvers and tight turns. These shocks feature a high-pressure gas charge that separates the unit’s internal oil and nitrogen to provide additional spring rate. This helps to maximize damping response that dissipates heat for better control. To further enhance ride control characteristics, Rancho® RS7000MT™ Monotube Shocks include a hydraulic lockout to cushion the impact as the vehicle suspension is fully extended.
  • Off-road inspired Fluon banded piston, provides a consistent seal between piston and pressure tube
  • Ten-stage velocity sensitive valving - Provides tuning specific for each vehicle
  • 46mm bore monotube construction, ideal for larger light trucks, SUVs and more
  • Black natural rubber bushings enhance durability and reduce road harshness
  • Monotube design with high pressure nitrogen gas charge
  • Added protection for the shock rod and oil seal
  • Delivers both performance and appearance
  • Rancho RS7000MT Monotube Shock Absorber
  • Quicker damping response time
  • 1.97-in. (50mm) body diameter
  • Premium long lasting finish

Additional Details:

  • Upper Mounting Code: Stem Mount - 2.3/8 Stem Length X 3/8-16 Thread Pitch
  • Lower Mounting Code: Cross Pin Mount - Closed Ended, 3/8 Hole ID (Both Ends) X 2.3/4 Pin Length (Hole Center to Center)
  • Compressed Length: 13.510
  • Extended Length: 21.210
  • Travel Length: 7.700
  • Dust Shield: Yes
  • Parts Pack(s): P1136 & P941
  • Extended Hydraulic Lockout: No
  • Extended Bumper Stop: No
  • Compressed Bumper Stop: No
Front
2
New
039703712804
$79.99
What Is MAP Price?
3
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- w/ 4 Front Raised Height; w/ Rancho RS6267 System DRIVE TYPE: RWD
6.5L V8Base- w/ 4 Front Raised Height; w/ Rancho RS6267 System DRIVE TYPE: RWD
5.7L V8SLE- w/ 4 Front Raised Height; w/ Rancho RS6267 System DRIVE TYPE: RWD
6.5L V8SLE- w/ 4 Front Raised Height; w/ Rancho RS6267 System DRIVE TYPE: RWD
5.7L V8SLT- w/ 4 Front Raised Height; w/ Rancho RS6267 System DRIVE TYPE: RWD
6.5L V8SLT- w/ 4 Front Raised Height; w/ Rancho RS6267 System DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: RanchoPart#: RS7150
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE RS7150

Rancho Shock Absorber RS7150

TS

Description:

  • Specifically engineered for high center of gravity light trucks and SUV’s to provide the handling, control and performance expected from Rancho® RS7000MT shock absorbers. These shocks provide enhanced stability over stock twin tubes by reducing body roll in evasive maneuvers and tight turns. These shocks feature a high-pressure gas charge that separates the unit’s internal oil and nitrogen to provide additional spring rate. This helps to maximize damping response that dissipates heat for better control. To further enhance ride control characteristics, Rancho® RS7000MT™ Monotube Shocks include a hydraulic lockout to cushion the impact as the vehicle suspension is fully extended.
  • Off-road inspired Fluon banded piston, provides a consistent seal between piston and pressure tube
  • Ten-stage velocity sensitive valving - Provides tuning specific for each vehicle
  • 46mm bore monotube construction, ideal for larger light trucks, SUVs and more
  • Black natural rubber bushings enhance durability and reduce road harshness
  • Monotube design with high pressure nitrogen gas charge
  • Added protection for the shock rod and oil seal
  • Delivers both performance and appearance
  • Rancho RS7000MT Monotube Shock Absorber
  • Quicker damping response time
  • 1.97-in. (50mm) body diameter
  • Premium long lasting finish

Additional Details:

  • Upper Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 2.7/16 Sleeve OAL
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 11.350
  • Extended Length: 16.600
  • Travel Length: 5.250
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Extended Hydraulic Lockout: No
  • Extended Bumper Stop: No
  • Compressed Bumper Stop: No
Front
2
New
039703003551
$79.99
What Is MAP Price?
8
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- w/ 0 - 1 Front Raised Height; w/o Rancho System DRIVE TYPE: 4WD
6.5L V8Base- w/ 0 - 1 Front Raised Height; w/o Rancho System DRIVE TYPE: 4WD
5.7L V8SLE- w/ 0 - 1 Front Raised Height; w/o Rancho System DRIVE TYPE: 4WD
6.5L V8SLE- w/ 0 - 1 Front Raised Height; w/o Rancho System DRIVE TYPE: 4WD
5.7L V8SLT- w/ 0 - 1 Front Raised Height; w/o Rancho System DRIVE TYPE: 4WD
6.5L V8SLT- w/ 0 - 1 Front Raised Height; w/o Rancho System DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: MonroePart#: 58612
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 58612

Monroe Shock Absorber 58612

TS

Description:

  • The Monroe® Sensa-Trac® load adjusting shock absorber with PSD (position sensitive damping) and the Safe Tech™ system combines our exclusive precision tapered grooves in the pressure tube with application engineered valving and Fluon banded piston to improve the ride, handling, and safety characteristics of the vehicle. These units also include a heavy gauge calibrated spring for extra control and comfort. A new pair of Monroe® Sensa-Trac® load adjusting shock absorbers can assist in maintaining ride height when up to 1,200 lbs of additional weight is loaded (Capacity is limited by vehicle suspension, tires and transmission. See vehicle owner's manual for details). These units are ideal for light trucks that carry varying loads or tow trailers.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
  • Unique Groove Tube - PSD: Precision tapered grooves in the pressure tube perform like an additional stage of valving for optimum ride tuning.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only - on most applications
  • Heavy Gauge Calibrated Coil Spring: Computer designed for maximum performance without an increase in ride harshness.
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Monroe Sensa-Trac Load Adjusting Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.7/8 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 14.625
  • Extended Length: 23.750
  • Travel Length: 9.125
  • Spring (Rate): 60
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Extended Hydraulic Lockout: No
  • Extended Bumper Stop: Yes
  • Compressed Bumper Stop: No
  • Dust Shield Material: Metal
Rear
1
New
048598010186
$125.06
$106.30
$18.76 (15%)
27
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- For Towing Hauling BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8Base- For Towing Hauling BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLE- For Towing Hauling BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLE- For Towing Hauling BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLT- For Towing Hauling BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLT- For Towing Hauling BODY NUM DOORS: 4, DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: MonroePart#: 58606
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE 58606

Monroe Shock Absorber 58606

TS

Description:

  • The Monroe® Sensa-Trac® load adjusting shock absorber with PSD (position sensitive damping) and the Safe Tech™ system combines our exclusive precision tapered grooves in the pressure tube with application engineered valving and Fluon banded piston to improve the ride, handling, and safety characteristics of the vehicle. These units also include a heavy gauge calibrated spring for extra control and comfort. A new pair of Monroe® Sensa-Trac® load adjusting shock absorbers can assist in maintaining ride height when up to 1,200 lbs of additional weight is loaded (Capacity is limited by vehicle suspension, tires and transmission. See vehicle owner's manual for details). These units are ideal for light trucks that carry varying loads or tow trailers.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
  • Unique Groove Tube - PSD: Precision tapered grooves in the pressure tube perform like an additional stage of valving for optimum ride tuning.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only - on most applications
  • Heavy Gauge Calibrated Coil Spring: Computer designed for maximum performance without an increase in ride harshness.
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Monroe Sensa-Trac Load Adjusting Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.7/8 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 14.000
  • Extended Length: 22.375
  • Travel Length: 8.375
  • Spring (Rate): 60
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Extended Hydraulic Lockout: No
  • Extended Bumper Stop: Yes
  • Compressed Bumper Stop: No
  • Dust Shield Material: Metal
Rear
1
New
048598010155
$125.16
$106.39
$18.77 (15%)
27
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- For Towing Hauling BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8Base- For Towing Hauling BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLE- For Towing Hauling BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLE- For Towing Hauling BODY NUM DOORS: 4, DRIVE TYPE: RWD
5.7L V8SLT- For Towing Hauling BODY NUM DOORS: 4, DRIVE TYPE: RWD
6.5L V8SLT- For Towing Hauling BODY NUM DOORS: 4, DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: RanchoPart#: RS999001
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE RS999001

Rancho Shock Absorber RS999001

TS

Description:

  • Rancho's® new RS9000XL shock absorbers feature adjustable damping with either a 2.75- or 2.38-in. diameter reserve tube. This massive shock body allows the RS9000XL to run cooler and more consistent even under the most demanding towing conditions, enhancing performance and durability, and is constructed with a larger than typical 18-mm diameter chromed piston rod. Rancho® RS9000XL™ shock series are engineered with nine position tuning technology that provides nine different levels of shock performance. These premium shocks also have polyurethane bushings that enhance shock performance and durability along with a boot that protects the shock rod and oil seal.
  • 2.75-in. (70mm) body diameter (select applications) - Delivers both performance and appearance
  • 9-position tuning technology - Provides 9 different levels of shock performance
  • Protective boot included - Added protection for the shock rod and oil seal
  • Polyurethane bushings - Enhance shock performance and durability
  • Limited Lifetime Warranty and 90-day free ride offer
  • Liquid metallic finish - Premium long lasting finish
  • Nitrogen gas charged - Optimizes shock performance
  • Large 18mm Nitro Carb rod - strong and durable
  • Rancho RS9000XL Shock Absorber

Additional Details:

  • Upper Mounting Code: Loop Bushing Mount - 5/8 Bushing ID X 1.5/16 Bushing OAL
  • Lower Mounting Code: Loop Bushing Mount - 5/8 Bushing ID X 1.5/16 Bushing OAL
  • Compressed Length: 13.680
  • Extended Length: 20.830
  • Travel Length: 7.150
  • Dust Shield: Yes
  • Parts Pack(s): P816 & P976
  • Reserve Tube Diameter: 2.380
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front
2
New
039703090018
$110.99
What Is MAP Price?
7
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- w/ 2 1/2 - 4 Front Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8Base- w/ 2 1/2 - 4 Front Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLE- w/ 2 1/2 - 4 Front Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLE- w/ 2 1/2 - 4 Front Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLT- w/ 2 1/2 - 4 Front Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLT- w/ 2 1/2 - 4 Front Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: RanchoPart#: RS999166
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE RS999166

Rancho Shock Absorber RS999166

TS

Description:

  • Rancho's® new RS9000XL shock absorbers feature adjustable damping with either a 2.75- or 2.38-in. diameter reserve tube. This massive shock body allows the RS9000XL to run cooler and more consistent even under the most demanding towing conditions, enhancing performance and durability, and is constructed with a larger than typical 18-mm diameter chromed piston rod. Rancho® RS9000XL™ shock series are engineered with nine position tuning technology that provides nine different levels of shock performance. These premium shocks also have polyurethane bushings that enhance shock performance and durability along with a boot that protects the shock rod and oil seal.
  • 2.75-in. (70mm) body diameter (select applications) - Delivers both performance and appearance
  • 9-position tuning technology - Provides 9 different levels of shock performance
  • Protective boot included - Added protection for the shock rod and oil seal
  • Polyurethane bushings - Enhance shock performance and durability
  • Limited Lifetime Warranty and 90-day free ride offer
  • Liquid metallic finish - Premium long lasting finish
  • Nitrogen gas charged - Optimizes shock performance
  • Large 18mm Nitro Carb rod - strong and durable
  • Rancho RS9000XL Shock Absorber

Additional Details:

  • Upper Mounting Code: Stem Mount - 2.3/8 Stem Length X 3/8-16 Thread Pitch
  • Lower Mounting Code: Cross Pin Mount - Closed Ended, 5/16 Hole ID (Both Ends) X 2.1/2 Pin Length (Hole Center to Center)
  • Compressed Length: 10.000
  • Extended Length: 13.750
  • Travel Length: 3.750
  • Dust Shield: Yes
  • Parts Pack(s): P1192
  • Cylinder Included: No
  • Reserve Tube Diameter: 2.188
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front
2
New
039703091664
$110.99
What Is MAP Price?
4
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- w/ 0 Front Raised Height; Slight Grinding Of Lower Control Arm Is Req DRIVE TYPE: RWD
6.5L V8Base- w/ 0 Front Raised Height; Slight Grinding Of Lower Control Arm Is Req DRIVE TYPE: RWD
5.7L V8SLE- w/ 0 Front Raised Height; Slight Grinding Of Lower Control Arm Is Req DRIVE TYPE: RWD
6.5L V8SLE- w/ 0 Front Raised Height; Slight Grinding Of Lower Control Arm Is Req DRIVE TYPE: RWD
5.7L V8SLT- w/ 0 Front Raised Height; Slight Grinding Of Lower Control Arm Is Req DRIVE TYPE: RWD
6.5L V8SLT- w/ 0 Front Raised Height; Slight Grinding Of Lower Control Arm Is Req DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: RanchoPart#: RS999190
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE RS999190

Rancho Shock Absorber RS999190

TS

Description:

  • Rancho's® new RS9000XL shock absorbers feature adjustable damping with either a 2.75- or 2.38-in. diameter reserve tube. This massive shock body allows the RS9000XL to run cooler and more consistent even under the most demanding towing conditions, enhancing performance and durability, and is constructed with a larger than typical 18-mm diameter chromed piston rod. Rancho® RS9000XL™ shock series are engineered with nine position tuning technology that provides nine different levels of shock performance. These premium shocks also have polyurethane bushings that enhance shock performance and durability along with a boot that protects the shock rod and oil seal.
  • 2.75-in. (70mm) body diameter (select applications) - Delivers both performance and appearance
  • 9-position tuning technology - Provides 9 different levels of shock performance
  • Protective boot included - Added protection for the shock rod and oil seal
  • Polyurethane bushings - Enhance shock performance and durability
  • Limited Lifetime Warranty and 90-day free ride offer
  • Liquid metallic finish - Premium long lasting finish
  • Nitrogen gas charged - Optimizes shock performance
  • Large 18mm Nitro Carb rod - strong and durable
  • Rancho RS9000XL Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 3/8 Hole ID (Both Ends) X 2.3/4 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 16.490
  • Extended Length: 26.340
  • Travel Length: 9.850
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Reserve Tube Diameter: 2.750
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Rear
2
New
039703091909
$110.99
What Is MAP Price?
8
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- w/ 2 1/2 - 4 Rear Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8Base- w/ 2 1/2 - 4 Rear Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLE- w/ 2 1/2 - 4 Rear Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLE- w/ 2 1/2 - 4 Rear Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
5.7L V8SLT- w/ 2 1/2 - 4 Rear Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
6.5L V8SLT- w/ 2 1/2 - 4 Rear Raised Height; w/ Rancho RS6455 System BODY NUM DOORS: 4, DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: RanchoPart#: RS999060
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE RS999060

Rancho Shock Absorber RS999060

TS

Description:

  • Rancho's® new RS9000XL shock absorbers feature adjustable damping with either a 2.75- or 2.38-in. diameter reserve tube. This massive shock body allows the RS9000XL to run cooler and more consistent even under the most demanding towing conditions, enhancing performance and durability, and is constructed with a larger than typical 18-mm diameter chromed piston rod. Rancho® RS9000XL™ shock series are engineered with nine position tuning technology that provides nine different levels of shock performance. These premium shocks also have polyurethane bushings that enhance shock performance and durability along with a boot that protects the shock rod and oil seal.
  • 2.75-in. (70mm) body diameter (select applications) - Delivers both performance and appearance
  • 9-position tuning technology - Provides 9 different levels of shock performance
  • Protective boot included - Added protection for the shock rod and oil seal
  • Polyurethane bushings - Enhance shock performance and durability
  • Limited Lifetime Warranty and 90-day free ride offer
  • Liquid metallic finish - Premium long lasting finish
  • Nitrogen gas charged - Optimizes shock performance
  • Large 18mm Nitro Carb rod - strong and durable
  • Rancho RS9000XL Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 3/8 Hole ID (Both Ends) X 2.3/4 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 18.563
  • Extended Length: 30.500
  • Travel Length: 11.937
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Reserve Tube Diameter: 2.750
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Rear
2
New
039703090605
$110.99
What Is MAP Price?
6
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- w/ 5 - 6 Rear Raised Height DRIVE TYPE: 4WD
6.5L V8Base- w/ 5 - 6 Rear Raised Height DRIVE TYPE: 4WD
5.7L V8SLE- w/ 5 - 6 Rear Raised Height DRIVE TYPE: 4WD
6.5L V8SLE- w/ 5 - 6 Rear Raised Height DRIVE TYPE: 4WD
5.7L V8SLT- w/ 5 - 6 Rear Raised Height DRIVE TYPE: 4WD
6.5L V8SLT- w/ 5 - 6 Rear Raised Height DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: RanchoPart#: RS999128
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE RS999128

Rancho Shock Absorber RS999128

TS

Description:

  • Rancho's® new RS9000XL shock absorbers feature adjustable damping with either a 2.75- or 2.38-in. diameter reserve tube. This massive shock body allows the RS9000XL to run cooler and more consistent even under the most demanding towing conditions, enhancing performance and durability, and is constructed with a larger than typical 18-mm diameter chromed piston rod. Rancho® RS9000XL™ shock series are engineered with nine position tuning technology that provides nine different levels of shock performance. These premium shocks also have polyurethane bushings that enhance shock performance and durability along with a boot that protects the shock rod and oil seal.
  • 2.75-in. (70mm) body diameter (select applications) - Delivers both performance and appearance
  • 9-position tuning technology - Provides 9 different levels of shock performance
  • Protective boot included - Added protection for the shock rod and oil seal
  • Polyurethane bushings - Enhance shock performance and durability
  • Limited Lifetime Warranty and 90-day free ride offer
  • Liquid metallic finish - Premium long lasting finish
  • Nitrogen gas charged - Optimizes shock performance
  • Large 18mm Nitro Carb rod - strong and durable
  • Rancho RS9000XL Shock Absorber

Additional Details:

  • Upper Mounting Code: Stem Mount - 2.3/8 Stem Length X 3/8-16 Thread Pitch
  • Lower Mounting Code: Cross Pin Mount - Closed Ended, 3/8 Hole ID (Both Ends) X 2.3/4 Pin Length (Hole Center to Center)
  • Compressed Length: 13.438
  • Extended Length: 20.500
  • Travel Length: 7.062
  • Dust Shield: Yes
  • Parts Pack(s): P941 & P1358
  • Cylinder Included: No
  • Reserve Tube Diameter: 2.188
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front
2
New
039703091282
$110.99
What Is MAP Price?
8
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- w/ 4 Front Raised Height; w/ Rancho RS6267 System; Slight Grinding Of Lower Control Arm Is Req DRIVE TYPE: RWD
6.5L V8Base- w/ 4 Front Raised Height; w/ Rancho RS6267 System; Slight Grinding Of Lower Control Arm Is Req DRIVE TYPE: RWD
5.7L V8SLE- w/ 4 Front Raised Height; w/ Rancho RS6267 System; Slight Grinding Of Lower Control Arm Is Req DRIVE TYPE: RWD
6.5L V8SLE- w/ 4 Front Raised Height; w/ Rancho RS6267 System; Slight Grinding Of Lower Control Arm Is Req DRIVE TYPE: RWD
5.7L V8SLT- w/ 4 Front Raised Height; w/ Rancho RS6267 System; Slight Grinding Of Lower Control Arm Is Req DRIVE TYPE: RWD
6.5L V8SLT- w/ 4 Front Raised Height; w/ Rancho RS6267 System; Slight Grinding Of Lower Control Arm Is Req DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: RanchoPart#: RS999059
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE RS999059

Rancho Shock Absorber RS999059

TS

Description:

  • Rancho's® new RS9000XL shock absorbers feature adjustable damping with either a 2.75- or 2.38-in. diameter reserve tube. This massive shock body allows the RS9000XL to run cooler and more consistent even under the most demanding towing conditions, enhancing performance and durability, and is constructed with a larger than typical 18-mm diameter chromed piston rod. Rancho® RS9000XL™ shock series are engineered with nine position tuning technology that provides nine different levels of shock performance. These premium shocks also have polyurethane bushings that enhance shock performance and durability along with a boot that protects the shock rod and oil seal.
  • 2.75-in. (70mm) body diameter (select applications) - Delivers both performance and appearance
  • 9-position tuning technology - Provides 9 different levels of shock performance
  • Protective boot included - Added protection for the shock rod and oil seal
  • Polyurethane bushings - Enhance shock performance and durability
  • Limited Lifetime Warranty and 90-day free ride offer
  • Liquid metallic finish - Premium long lasting finish
  • Nitrogen gas charged - Optimizes shock performance
  • Large 18mm Nitro Carb rod - strong and durable
  • Rancho RS9000XL Shock Absorber

Additional Details:

  • Upper Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 2.7/16 Sleeve OAL
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 15.688
  • Extended Length: 24.375
  • Travel Length: 8.687
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Reserve Tube Diameter: 2.188
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front
2
New
039703090599
$110.99
What Is MAP Price?
4
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- w/ 5 - 6 Front Raised Height DRIVE TYPE: 4WD
6.5L V8Base- w/ 5 - 6 Front Raised Height DRIVE TYPE: 4WD
5.7L V8SLE- w/ 5 - 6 Front Raised Height DRIVE TYPE: 4WD
6.5L V8SLE- w/ 5 - 6 Front Raised Height DRIVE TYPE: 4WD
5.7L V8SLT- w/ 5 - 6 Front Raised Height DRIVE TYPE: 4WD
6.5L V8SLT- w/ 5 - 6 Front Raised Height DRIVE TYPE: 4WD
Part Name: Shock AbsorberBrand: RanchoPart#: RS999124
1995 GMC Yukon Shock Absorber & Strut Assembly TENNECO MONROE RS999124

Rancho Shock Absorber RS999124

TS

Description:

  • Rancho's® new RS9000XL shock absorbers feature adjustable damping with either a 2.75- or 2.38-in. diameter reserve tube. This massive shock body allows the RS9000XL to run cooler and more consistent even under the most demanding towing conditions, enhancing performance and durability, and is constructed with a larger than typical 18-mm diameter chromed piston rod. Rancho® RS9000XL™ shock series are engineered with nine position tuning technology that provides nine different levels of shock performance. These premium shocks also have polyurethane bushings that enhance shock performance and durability along with a boot that protects the shock rod and oil seal.
  • 2.75-in. (70mm) body diameter (select applications) - Delivers both performance and appearance
  • 9-position tuning technology - Provides 9 different levels of shock performance
  • Protective boot included - Added protection for the shock rod and oil seal
  • Polyurethane bushings - Enhance shock performance and durability
  • Limited Lifetime Warranty and 90-day free ride offer
  • Liquid metallic finish - Premium long lasting finish
  • Nitrogen gas charged - Optimizes shock performance
  • Large 18mm Nitro Carb rod - strong and durable
  • Rancho RS9000XL Shock Absorber

Additional Details:

  • Upper Mounting Code: Cross Pin Mount - Closed Ended, 3/8 Hole ID (Both Ends) X 2.3/4 Pin Length (Hole Center to Center)
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 9/16 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 15.250
  • Extended Length: 23.750
  • Travel Length: 8.500
  • Dust Shield: Yes
  • Parts Pack(s): None
  • Reserve Tube Diameter: 2.188
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Rear
2
New
039703091244
$110.99
What Is MAP Price?
2
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
5.7L V8Base- w/ 0 Rear Raised Height BODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8Base- w/ 0 Rear Raised Height BODY NUM DOORS: 2, DRIVE TYPE: RWD
5.7L V8SLE- w/ 0 Rear Raised Height BODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8SLE- w/ 0 Rear Raised Height BODY NUM DOORS: 2, DRIVE TYPE: RWD
5.7L V8SLT- w/ 0 Rear Raised Height BODY NUM DOORS: 2, DRIVE TYPE: RWD
6.5L V8SLT- w/ 0 Rear Raised Height BODY NUM DOORS: 2, DRIVE TYPE: RWD