My Vehicle:

Search Filter:
Engine
    x
  • Check All
  • 2.4L L4
  • 2.5L L4
  • 3.5L V6
Brand
    x
  • Check All
  • FCS Struts
  • KYB
  • Monroe
Position
    x
  • Check All
  • Front Left
  • Front Right
  • Rear Left
  • Rear Right

2010 Toyota Camry Shock Absorber & Strut Assembly

We have found 32 Shock Absorber & Strut Assembly for
2010 Toyota Camry 2010 Toyota Camry
Part Name: Suspension Strut AssemblyBrand: MonroePart#: 72310
2010 Toyota Camry Shock Absorber & Strut Assembly TENNECO MONROE 72310

Monroe Suspension Strut Assembly 72310

TS

Description:

  • Monroe® OESpectrum® struts are engineered specifically for foreign nameplate vehicles and feature the latest global original equipment valving technologies. Developed through years of research and on-vehicle testing, Monroe® OESpectrum® units provide an unprecedented level of handling precision and control while filtering out the ride harshness commonly encountered on many foreign nameplate applications. This unique blend of control and comfort is made possible through Tenneco's 'Twin Technology™ Active Control System', an exclusive internal damping control technology first developed for leading global vehicle manufacturers. Tenneco's Twin Technology™ consists of its latest Impact Control Valve (ICV), which delivers exceptional control under virtually all driving conditions, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
  • Twin Technology™: Impact Control Valve (ICV), delivers exceptional control under virtually all driving conditions, and patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Rod Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
  • Unique Rod Guide and Single Lip Seal: Bronze reinforced rod guide bearing and special seal provides longer service life and consistent performance.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Hardened and Chrome Plated Piston Rod: Long service life.
  • Monroe OESpectrum Strut

Additional Details:

  • Body Type: B2
  • Body Length: 15.500
  • Compressed Length: 16.000
  • Extended Length: 24.063
  • Travel Length: 8.063
  • Dust Shield: No
  • Parts Pack(s): P1490
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Rear Left
1
New
048598028419
$73.42
$62.41
$11.01 (15%)
65
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.5L L4LE- Premium - Limited Lifetime Warranty
3.5L V6LE- Premium - Limited Lifetime Warranty
2.4L L4Hybrid- Premium - Limited Lifetime Warranty
2.5L L4XLE- Premium - Limited Lifetime Warranty
3.5L V6XLE- Premium - Limited Lifetime Warranty
Part Name: Suspension Strut AssemblyBrand: MonroePart#: 72309
2010 Toyota Camry Shock Absorber & Strut Assembly TENNECO MONROE 72309

Monroe Suspension Strut Assembly 72309

TS

Description:

  • Monroe® OESpectrum® struts are engineered specifically for foreign nameplate vehicles and feature the latest global original equipment valving technologies. Developed through years of research and on-vehicle testing, Monroe® OESpectrum® units provide an unprecedented level of handling precision and control while filtering out the ride harshness commonly encountered on many foreign nameplate applications. This unique blend of control and comfort is made possible through Tenneco's 'Twin Technology™ Active Control System', an exclusive internal damping control technology first developed for leading global vehicle manufacturers. Tenneco's Twin Technology™ consists of its latest Impact Control Valve (ICV), which delivers exceptional control under virtually all driving conditions, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
  • Twin Technology™: Impact Control Valve (ICV), delivers exceptional control under virtually all driving conditions, and patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Rod Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
  • Unique Rod Guide and Single Lip Seal: Bronze reinforced rod guide bearing and special seal provides longer service life and consistent performance.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Hardened and Chrome Plated Piston Rod: Long service life.
  • Monroe OESpectrum Strut

Additional Details:

  • Body Type: B2
  • Body Length: 15.500
  • Compressed Length: 16.000
  • Extended Length: 24.063
  • Travel Length: 8.063
  • Dust Shield: No
  • Parts Pack(s): P1490
  • Cylinder Included: No
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Rear Right
1
New
048598028396
$73.42
$62.41
$11.01 (15%)
67
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.5L L4LE- Premium - Limited Lifetime Warranty
3.5L V6LE- Premium - Limited Lifetime Warranty
2.4L L4Hybrid- Premium - Limited Lifetime Warranty
2.5L L4XLE- Premium - Limited Lifetime Warranty
3.5L V6XLE- Premium - Limited Lifetime Warranty
Part Name: Suspension Strut AssemblyBrand: MonroePart#: 72307
2010 Toyota Camry Shock Absorber & Strut Assembly TENNECO MONROE 72307

Monroe Suspension Strut Assembly 72307

TS

Description:

  • Monroe® OESpectrum® struts are engineered specifically for foreign nameplate vehicles and feature the latest global original equipment valving technologies. Developed through years of research and on-vehicle testing, Monroe® OESpectrum® units provide an unprecedented level of handling precision and control while filtering out the ride harshness commonly encountered on many foreign nameplate applications. This unique blend of control and comfort is made possible through Tenneco's 'Twin Technology™ Active Control System', an exclusive internal damping control technology first developed for leading global vehicle manufacturers. Tenneco's Twin Technology™ consists of its latest Impact Control Valve (ICV), which delivers exceptional control under virtually all driving conditions, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
  • Twin Technology™: Impact Control Valve (ICV), delivers exceptional control under virtually all driving conditions, and patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Rod Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
  • Unique Rod Guide and Single Lip Seal: Bronze reinforced rod guide bearing and special seal provides longer service life and consistent performance.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Hardened and Chrome Plated Piston Rod: Long service life.
  • Monroe OESpectrum Strut

Additional Details:

  • Body Type: B2
  • Body Length: 13.813
  • Compressed Length: 14.500
  • Extended Length: 21.438
  • Travel Length: 6.938
  • Dust Shield: No
  • Parts Pack(s): P1458
  • Cylinder Included: No
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front Right
1
New
048598028358
$76.58
$65.09
$11.49 (15%)
110
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.4L L4Hybrid- Premium - Limited Lifetime Warranty
2.5L L4LE- Premium - Limited Lifetime Warranty
3.5L V6LE- Premium - Limited Lifetime Warranty
2.5L L4SE- Premium - Limited Lifetime Warranty
3.5L V6SE- Premium - Limited Lifetime Warranty
2.5L L4XLE- Premium - Limited Lifetime Warranty
3.5L V6XLE- Premium - Limited Lifetime Warranty
Part Name: Suspension Strut AssemblyBrand: MonroePart#: 72308
2010 Toyota Camry Shock Absorber & Strut Assembly TENNECO MONROE 72308

Monroe Suspension Strut Assembly 72308

TS

Description:

  • Monroe® OESpectrum® struts are engineered specifically for foreign nameplate vehicles and feature the latest global original equipment valving technologies. Developed through years of research and on-vehicle testing, Monroe® OESpectrum® units provide an unprecedented level of handling precision and control while filtering out the ride harshness commonly encountered on many foreign nameplate applications. This unique blend of control and comfort is made possible through Tenneco's 'Twin Technology™ Active Control System', an exclusive internal damping control technology first developed for leading global vehicle manufacturers. Tenneco's Twin Technology™ consists of its latest Impact Control Valve (ICV), which delivers exceptional control under virtually all driving conditions, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
  • Twin Technology™: Impact Control Valve (ICV), delivers exceptional control under virtually all driving conditions, and patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Rod Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
  • Unique Rod Guide and Single Lip Seal: Bronze reinforced rod guide bearing and special seal provides longer service life and consistent performance.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Hardened and Chrome Plated Piston Rod: Long service life.
  • Monroe OESpectrum Strut

Additional Details:

  • Body Type: B2
  • Body Length: 13.813
  • Compressed Length: 14.500
  • Extended Length: 21.438
  • Travel Length: 6.938
  • Dust Shield: No
  • Parts Pack(s): P1458
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front Left
1
New
048598028372
$76.58
$65.09
$11.49 (15%)
117
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.4L L4Hybrid- Premium - Limited Lifetime Warranty
2.5L L4LE- Premium - Limited Lifetime Warranty
3.5L V6LE- Premium - Limited Lifetime Warranty
2.5L L4SE- Premium - Limited Lifetime Warranty
3.5L V6SE- Premium - Limited Lifetime Warranty
2.5L L4XLE- Premium - Limited Lifetime Warranty
3.5L V6XLE- Premium - Limited Lifetime Warranty
Part Name: Suspension Strut AssemblyBrand: KYBPart#: 339183
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 339183
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3391832010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3391832010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3391832010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 339183

KYB Suspension Strut Assembly 339183

KY

Description:

  • Gas Strut

Additional Details:

  • Extended Length (in): 21.33
  • Compressed Length (in): 15
  • Stroke (in): 6.33
  • Cover: No
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: 14x1.50
Front Right
1
New
781552601234
$76.76
$65.25
$11.51 (15%)
91
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.5L L4SE- Recommended OE Replacement
3.5L V6SE- Recommended OE Replacement
Part Name: Suspension Strut AssemblyBrand: KYBPart#: 339184
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 339184
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3391842010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3391842010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3391842010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 339184

KYB Suspension Strut Assembly 339184

KY

Description:

  • Gas Strut

Additional Details:

  • Extended Length (in): 21.33
  • Compressed Length (in): 15
  • Stroke (in): 6.33
  • Cover: No
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: 14x1.50
Front Left
1
New
781552601258
$76.76
$65.25
$11.51 (15%)
72
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.5L L4SE- Recommended OE Replacement
3.5L V6SE- Recommended OE Replacement
Part Name: Suspension Strut AssemblyBrand: KYBPart#: 339179
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 339179
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3391792010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3391792010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3391792010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 339179

KYB Suspension Strut Assembly 339179

KY

Description:

  • Gas Strut

Additional Details:

  • Extended Length (in): 21.33
  • Compressed Length (in): 15
  • Stroke (in): 6.33
  • Cover: No
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: 14x1.50
Front Right
1
New
781552601159
$80.87
$68.74
$12.13 (15%)
120
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.5L L4LE- Recommended OE Replacement
3.5L V6LE- Recommended OE Replacement
2.5L L4XLE- Recommended OE Replacement
3.5L V6XLE- Recommended OE Replacement
Part Name: Suspension Strut AssemblyBrand: KYBPart#: 339180
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 339180
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3391802010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3391802010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3391802010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 339180

KYB Suspension Strut Assembly 339180

KY

Description:

  • Gas Strut

Additional Details:

  • Extended Length (in): 21.33
  • Compressed Length (in): 15
  • Stroke (in): 6.33
  • Cover: No
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: 14x1.50
Front Left
1
New
781552601173
$80.87
$68.74
$12.13 (15%)
123
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.5L L4LE- Recommended OE Replacement
3.5L V6LE- Recommended OE Replacement
2.5L L4XLE- Recommended OE Replacement
3.5L V6XLE- Recommended OE Replacement
Part Name: Suspension Strut AssemblyBrand: KYBPart#: 339024
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 339024
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3390242010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3390242010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3390242010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 339024

KYB Suspension Strut Assembly 339024

KY

Description:

  • Gas Strut

Additional Details:

  • Extended Length (in): 21.34
  • Compressed Length (in): 15.01
  • Stroke (in): 6.33
  • Cover: No
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: 14x1.50
Front Left
1
New
781552504009
$83.79
$71.22
$12.57 (15%)
151
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.4L L4Hybrid- Recommended OE Replacement
Part Name: Suspension Strut AssemblyBrand: KYBPart#: 339023
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 339023
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3390232010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3390232010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3390232010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 339023

KYB Suspension Strut Assembly 339023

KY

Description:

  • Gas Strut

Additional Details:

  • Extended Length (in): 21.34
  • Compressed Length (in): 15.01
  • Stroke (in): 6.33
  • Cover: No
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: 14x1.50
Front Right
1
New
781552503989
$83.79
$71.22
$12.57 (15%)
149
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.4L L4Hybrid- Recommended OE Replacement
Part Name: Suspension Strut AssemblyBrand: KYBPart#: 339044
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 339044
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3390442010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3390442010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3390442010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 339044

KYB Suspension Strut Assembly 339044

KY

Description:

  • Gas Strut

Additional Details:

  • Extended Length (in): 24.06
  • Compressed Length (in): 16.43
  • Stroke (in): 7.63
  • Cover: No
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: 14x1.50
Rear Left
1
New
781552523284
$84.19
$71.56
$12.63 (15%)
146
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.5L L4LE- Recommended OE Replacement
3.5L V6LE- Recommended OE Replacement
2.4L L4Hybrid- Recommended OE Replacement
2.5L L4XLE- Recommended OE Replacement
3.5L V6XLE- Recommended OE Replacement
Part Name: Suspension Strut AssemblyBrand: KYBPart#: 339043
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 339043
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3390432010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3390432010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3390432010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 339043

KYB Suspension Strut Assembly 339043

KY

Description:

  • Gas Strut

Additional Details:

  • Extended Length (in): 24.06
  • Compressed Length (in): 16.43
  • Stroke (in): 7.63
  • Cover: No
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: 14x1.50
Rear Right
1
New
781552523260
$84.19
$71.56
$12.63 (15%)
156
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.5L L4LE- Recommended OE Replacement
3.5L V6LE- Recommended OE Replacement
2.4L L4Hybrid- Recommended OE Replacement
2.5L L4XLE- Recommended OE Replacement
3.5L V6XLE- Recommended OE Replacement
Part Name: Suspension Strut and Coil Spring AssemblyBrand: FCS StrutsPart#: 1331607L
2010 Toyota Camry Shock Absorber & Strut Assembly AIR CONDITION PARTS 1331607L

FCS Struts Suspension Strut and Coil Spring Assembly 1331607L

FC

Description:

  • Complete Strut Assembly
Rear Left
1
New
00013964160819
$84.48
$71.81
$12.67 (15%)
32
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
2.5L L4LEFUEL TYPE: GAS
2.5L L4XLEFUEL TYPE: GAS
Part Name: Suspension Strut and Coil Spring AssemblyBrand: FCS StrutsPart#: 1331607R
2010 Toyota Camry Shock Absorber & Strut Assembly AIR CONDITION PARTS 1331607R

FCS Struts Suspension Strut and Coil Spring Assembly 1331607R

FC

Description:

  • Complete Strut Assembly
Rear Right
1
New
00013964160802
$84.48
$71.81
$12.67 (15%)
49
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
2.5L L4LEFUEL TYPE: GAS
2.5L L4XLEFUEL TYPE: GAS
Part Name: Suspension Strut AssemblyBrand: KYBPart#: 335071
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 335071
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3350712010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3350712010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 335071

KYB Suspension Strut Assembly 335071

KY

Description:

  • Gas Strut

Additional Details:

  • Extended Length (in): 22.04
  • Compressed Length (in): 16.42
  • Stroke (in): 5.62
  • Cover: No
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: 14x1.50
Rear Left
1
New
781552602415
$85.09
$72.33
$12.76 (15%)
58
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.5L L4SE- Recommended OE Replacement
3.5L V6SE- Recommended OE Replacement
Part Name: Suspension Strut AssemblyBrand: KYBPart#: 335070
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 335070
2010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3350702010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3350702010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 3350702010 Toyota Camry Shock Absorber & Strut Assembly KYB SHOCKS 335070

KYB Suspension Strut Assembly 335070

KY

Description:

  • Gas Strut

Additional Details:

  • Extended Length (in): 22.04
  • Compressed Length (in): 16.42
  • Stroke (in): 5.62
  • Cover: No
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: 14x1.50
Rear Right
1
New
781552602392
$85.09
$72.33
$12.76 (15%)
63
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.5L L4SE- Recommended OE Replacement
3.5L V6SE- Recommended OE Replacement
Part Name: Suspension Strut and Coil Spring AssemblyBrand: FCS StrutsPart#: 1331582R
2010 Toyota Camry Shock Absorber & Strut Assembly AIR CONDITION PARTS 1331582R

FCS Struts Suspension Strut and Coil Spring Assembly 1331582R

FC

Description:

  • Complete Strut Assembly
Front Right
1
New
00013964160796
$89.24
$75.85
$13.39 (15%)
58
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
2.5L L4LEFUEL TYPE: GAS
2.5L L4XLEFUEL TYPE: GAS
Part Name: Suspension Strut and Coil Spring AssemblyBrand: FCS StrutsPart#: 1331582L
2010 Toyota Camry Shock Absorber & Strut Assembly AIR CONDITION PARTS 1331582L

FCS Struts Suspension Strut and Coil Spring Assembly 1331582L

FC

Description:

  • Complete Strut Assembly
Front Left
1
New
00013964160789
$89.24
$75.85
$13.39 (15%)
74
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
2.5L L4LEFUEL TYPE: GAS
2.5L L4XLEFUEL TYPE: GAS
Part Name: Suspension Strut and Coil Spring AssemblyBrand: FCS StrutsPart#: 2331582L
2010 Toyota Camry Shock Absorber & Strut Assembly AIR CONDITION PARTS 2331582L

FCS Struts Suspension Strut and Coil Spring Assembly 2331582L

FC

Description:

  • Complete Strut Assembly
Front Left
1
New
00013964571073
$93.99
$79.89
$14.10 (15%)
9
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub Model
3.5L V6LE
3.5L V6SE
3.5L V6XLE
Part Name: Suspension Strut and Coil Spring AssemblyBrand: FCS StrutsPart#: 2331582R
2010 Toyota Camry Shock Absorber & Strut Assembly AIR CONDITION PARTS 2331582R

FCS Struts Suspension Strut and Coil Spring Assembly 2331582R

FC

Description:

  • Complete Strut Assembly
Front Right
1
New
00013964570892
$93.99
$79.89
$14.10 (15%)
14
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub Model
3.5L V6LE
3.5L V6SE
3.5L V6XLE
Part Name: Suspension Strut AssemblyBrand: MonroePart#: 72385
2010 Toyota Camry Shock Absorber & Strut Assembly TENNECO MONROE 72385

Monroe Suspension Strut Assembly 72385

TS

Description:

  • Monroe® OESpectrum® struts are engineered specifically for foreign nameplate vehicles and feature the latest global original equipment valving technologies. Developed through years of research and on-vehicle testing, Monroe® OESpectrum® units provide an unprecedented level of handling precision and control while filtering out the ride harshness commonly encountered on many foreign nameplate applications. This unique blend of control and comfort is made possible through Tenneco's 'Twin Technology™ Active Control System', an exclusive internal damping control technology first developed for leading global vehicle manufacturers. Tenneco's Twin Technology™ consists of its latest Impact Control Valve (ICV), which delivers exceptional control under virtually all driving conditions, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
  • Twin Technology™: Impact Control Valve (ICV), delivers exceptional control under virtually all driving conditions, and patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Rod Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
  • Unique Rod Guide and Single Lip Seal: Bronze reinforced rod guide bearing and special seal provides longer service life and consistent performance.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Hardened and Chrome Plated Piston Rod: Long service life.
  • Monroe OESpectrum Strut

Additional Details:

  • Body Type: B10
  • Body Length: 15.563
  • Compressed Length: 16.063
  • Extended Length: 22.063
  • Travel Length: 6.000
  • Dust Shield: No
  • Parts Pack(s): P1490
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Rear Left
1
New
048598056269
$102.05
$86.74
$15.31 (15%)
58
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.5L L4SE- Premium - Limited Lifetime Warranty
3.5L V6SE- Premium - Limited Lifetime Warranty
Part Name: Suspension Strut AssemblyBrand: MonroePart#: 72384
2010 Toyota Camry Shock Absorber & Strut Assembly TENNECO MONROE 72384

Monroe Suspension Strut Assembly 72384

TS

Description:

  • Monroe® OESpectrum® struts are engineered specifically for foreign nameplate vehicles and feature the latest global original equipment valving technologies. Developed through years of research and on-vehicle testing, Monroe® OESpectrum® units provide an unprecedented level of handling precision and control while filtering out the ride harshness commonly encountered on many foreign nameplate applications. This unique blend of control and comfort is made possible through Tenneco's 'Twin Technology™ Active Control System', an exclusive internal damping control technology first developed for leading global vehicle manufacturers. Tenneco's Twin Technology™ consists of its latest Impact Control Valve (ICV), which delivers exceptional control under virtually all driving conditions, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
  • Twin Technology™: Impact Control Valve (ICV), delivers exceptional control under virtually all driving conditions, and patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Rod Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
  • Unique Rod Guide and Single Lip Seal: Bronze reinforced rod guide bearing and special seal provides longer service life and consistent performance.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Hardened and Chrome Plated Piston Rod: Long service life.
  • Monroe OESpectrum Strut

Additional Details:

  • Body Type: B11
  • Body Length: 15.938
  • Compressed Length: 16.438
  • Extended Length: 22.063
  • Travel Length: 5.625
  • Dust Shield: No
  • Parts Pack(s): P1490
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Rear Right
1
New
048598056252
$102.05
$86.74
$15.31 (15%)
60
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.5L L4SE- Premium - Limited Lifetime Warranty
3.5L V6SE- Premium - Limited Lifetime Warranty
Part Name: Suspension Strut and Coil Spring AssemblyBrand: MonroePart#: 172309
2010 Toyota Camry Shock Absorber & Strut Assembly TENNECO MONROE 172309

Monroe Suspension Strut and Coil Spring Assembly 172309

TS

Description:

  • The revolutionary Monroe® Quick-Strut® unit is the first complete, ready-to-install replacement strut assembly available! Monroe® Quick-Strut® units include all the components required for strut replacement in a single, fully-assembled unit. They feature pre-assembled replacement bearing plate, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and a premium strut. This breakthrough design saves on installation time by eliminating having to disassemble components and compress the coil spring prior to installation. Each Quick-Strut® assembly features application-engineered valving to optimize each vehicle's unique ride and handling characteristics. Available for popular passenger car, light truck and SUV applications.
  • Upper Spring Seat: Each new spring seat is engineered to complement the ride control characteristic of the corresponding premium Monroe® strut and upper strut mount. The upper spring seat provides consistent performance without transmitting noise or vibration into the chassis. Also supports the vehicle’s weight and helps properly offset the spring in the strut tower.
  • Bearing Plate: The new bearing plate helps ensure consistent, precise steering return by eliminating “memory steer.” Helps eliminate steering noises commonly associated with worn or corroded bearings. Also improves overall steering smoothness (if equipped - front only)
  • Coil Spring: Manufactured from high-quality U.S. steel, each coil spring is precisely calibrated to support the vehicle’s weight and help ensure correct ride height. Each spring is painted or powder-coated for excellent rust resistance
  • Pre-Assembled Upper Strut Mount: OE-style bearings, SAE-grade nuts and bolts, Superior rubber-to-steel bonding, Plated steel for longer wear, All components manufactured to meet or exceed OE performance
  • Premium Strut: Premium strut technology based on application. Each strut features application-engineered valving to complement each vehicle's unique ride and handling characteristics
  • Boot Kit: The durable strut boot protects the strut rod and seal from dirt and debris. The premium bumper prevents component damage when the suspension bottoms out
  • Spring Isolators: Prevents metal to metal contact and helps eliminate noise between the spring and spring seat
  • Monroe Quick-Strut Complete Strut Assembly

Additional Details:

  • Body Type: B12
  • Body Length: 15.230
  • Compressed Length: 15.960
  • Extended Length: 24.090
  • Travel Length: 8.130
  • Dust Shield: No
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Rear Right
1
New
048598131409
$126.32
$107.37
$18.95 (15%)
33
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.5L L4LE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
3.5L V6LE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
2.4L L4Hybrid- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
2.5L L4XLE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
3.5L V6XLE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
Part Name: Suspension Strut and Coil Spring AssemblyBrand: MonroePart#: 172310
2010 Toyota Camry Shock Absorber & Strut Assembly TENNECO MONROE 172310

Monroe Suspension Strut and Coil Spring Assembly 172310

TS

Description:

  • The revolutionary Monroe® Quick-Strut® unit is the first complete, ready-to-install replacement strut assembly available! Monroe® Quick-Strut® units include all the components required for strut replacement in a single, fully-assembled unit. They feature pre-assembled replacement bearing plate, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and a premium strut. This breakthrough design saves on installation time by eliminating having to disassemble components and compress the coil spring prior to installation. Each Quick-Strut® assembly features application-engineered valving to optimize each vehicle's unique ride and handling characteristics. Available for popular passenger car, light truck and SUV applications.
  • Upper Spring Seat: Each new spring seat is engineered to complement the ride control characteristic of the corresponding premium Monroe® strut and upper strut mount. The upper spring seat provides consistent performance without transmitting noise or vibration into the chassis. Also supports the vehicle’s weight and helps properly offset the spring in the strut tower.
  • Bearing Plate: The new bearing plate helps ensure consistent, precise steering return by eliminating “memory steer.” Helps eliminate steering noises commonly associated with worn or corroded bearings. Also improves overall steering smoothness (if equipped - front only)
  • Coil Spring: Manufactured from high-quality U.S. steel, each coil spring is precisely calibrated to support the vehicle’s weight and help ensure correct ride height. Each spring is painted or powder-coated for excellent rust resistance
  • Pre-Assembled Upper Strut Mount: OE-style bearings, SAE-grade nuts and bolts, Superior rubber-to-steel bonding, Plated steel for longer wear, All components manufactured to meet or exceed OE performance
  • Premium Strut: Premium strut technology based on application. Each strut features application-engineered valving to complement each vehicle's unique ride and handling characteristics
  • Boot Kit: The durable strut boot protects the strut rod and seal from dirt and debris. The premium bumper prevents component damage when the suspension bottoms out
  • Spring Isolators: Prevents metal to metal contact and helps eliminate noise between the spring and spring seat
  • Monroe Quick-Strut Complete Strut Assembly

Additional Details:

  • Body Type: B12
  • Body Length: 15.230
  • Compressed Length: 15.960
  • Extended Length: 24.090
  • Travel Length: 8.130
  • Dust Shield: No
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Rear Left
1
New
048598131225
$126.32
$107.37
$18.95 (15%)
53
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.5L L4LE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
3.5L V6LE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
2.4L L4Hybrid- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
2.5L L4XLE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
3.5L V6XLE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
Part Name: Suspension Strut and Coil Spring AssemblyBrand: MonroePart#: 272308
2010 Toyota Camry Shock Absorber & Strut Assembly TENNECO MONROE 272308

Monroe Suspension Strut and Coil Spring Assembly 272308

TS

Description:

  • The revolutionary Monroe® Quick-Strut® unit is the first complete, ready-to-install replacement strut assembly available! Monroe® Quick-Strut® units include all the components required for strut replacement in a single, fully-assembled unit. They feature pre-assembled replacement bearing plate, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and a premium strut. This breakthrough design saves on installation time by eliminating having to disassemble components and compress the coil spring prior to installation. Each Quick-Strut® assembly features application-engineered valving to optimize each vehicle's unique ride and handling characteristics. Available for popular passenger car, light truck and SUV applications.
  • Upper Spring Seat: Each new spring seat is engineered to complement the ride control characteristic of the corresponding premium Monroe® strut and upper strut mount. The upper spring seat provides consistent performance without transmitting noise or vibration into the chassis. Also supports the vehicle’s weight and helps properly offset the spring in the strut tower.
  • Bearing Plate: The new bearing plate helps ensure consistent, precise steering return by eliminating “memory steer.” Helps eliminate steering noises commonly associated with worn or corroded bearings. Also improves overall steering smoothness (if equipped - front only)
  • Coil Spring: Manufactured from high-quality U.S. steel, each coil spring is precisely calibrated to support the vehicle’s weight and help ensure correct ride height. Each spring is painted or powder-coated for excellent rust resistance
  • Pre-Assembled Upper Strut Mount: OE-style bearings, SAE-grade nuts and bolts, Superior rubber-to-steel bonding, Plated steel for longer wear, All components manufactured to meet or exceed OE performance
  • Premium Strut: Premium strut technology based on application. Each strut features application-engineered valving to complement each vehicle's unique ride and handling characteristics
  • Boot Kit: The durable strut boot protects the strut rod and seal from dirt and debris. The premium bumper prevents component damage when the suspension bottoms out
  • Spring Isolators: Prevents metal to metal contact and helps eliminate noise between the spring and spring seat
  • Monroe Quick-Strut Complete Strut Assembly

Additional Details:

  • Body Type: B17
  • Body Length: 13.810
  • Compressed Length: 14.490
  • Extended Length: 21.380
  • Travel Length: 6.890
  • Dust Shield: No
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front Left
1
New
048598131201
$139.65
$118.70
$20.95 (15%)
37
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
3.5L V6LE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
3.5L V6SE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
3.5L V6XLE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
Part Name: Suspension Strut and Coil Spring AssemblyBrand: MonroePart#: 272307
2010 Toyota Camry Shock Absorber & Strut Assembly TENNECO MONROE 272307

Monroe Suspension Strut and Coil Spring Assembly 272307

TS

Description:

  • The revolutionary Monroe® Quick-Strut® unit is the first complete, ready-to-install replacement strut assembly available! Monroe® Quick-Strut® units include all the components required for strut replacement in a single, fully-assembled unit. They feature pre-assembled replacement bearing plate, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and a premium strut. This breakthrough design saves on installation time by eliminating having to disassemble components and compress the coil spring prior to installation. Each Quick-Strut® assembly features application-engineered valving to optimize each vehicle's unique ride and handling characteristics. Available for popular passenger car, light truck and SUV applications.
  • Upper Spring Seat: Each new spring seat is engineered to complement the ride control characteristic of the corresponding premium Monroe® strut and upper strut mount. The upper spring seat provides consistent performance without transmitting noise or vibration into the chassis. Also supports the vehicle’s weight and helps properly offset the spring in the strut tower.
  • Bearing Plate: The new bearing plate helps ensure consistent, precise steering return by eliminating “memory steer.” Helps eliminate steering noises commonly associated with worn or corroded bearings. Also improves overall steering smoothness (if equipped - front only)
  • Coil Spring: Manufactured from high-quality U.S. steel, each coil spring is precisely calibrated to support the vehicle’s weight and help ensure correct ride height. Each spring is painted or powder-coated for excellent rust resistance
  • Pre-Assembled Upper Strut Mount: OE-style bearings, SAE-grade nuts and bolts, Superior rubber-to-steel bonding, Plated steel for longer wear, All components manufactured to meet or exceed OE performance
  • Premium Strut: Premium strut technology based on application. Each strut features application-engineered valving to complement each vehicle's unique ride and handling characteristics
  • Boot Kit: The durable strut boot protects the strut rod and seal from dirt and debris. The premium bumper prevents component damage when the suspension bottoms out
  • Spring Isolators: Prevents metal to metal contact and helps eliminate noise between the spring and spring seat
  • Monroe Quick-Strut Complete Strut Assembly

Additional Details:

  • Body Type: B10
  • Body Length: 13.810
  • Compressed Length: 14.490
  • Extended Length: 21.380
  • Travel Length: 6.890
  • Dust Shield: No
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front Right
1
New
048598131188
$139.65
$118.70
$20.95 (15%)
46
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
3.5L V6LE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
3.5L V6SE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
3.5L V6XLE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
Part Name: Suspension Strut and Coil Spring AssemblyBrand: MonroePart#: 172307
2010 Toyota Camry Shock Absorber & Strut Assembly TENNECO MONROE 172307

Monroe Suspension Strut and Coil Spring Assembly 172307

TS

Description:

  • The revolutionary Monroe® Quick-Strut® unit is the first complete, ready-to-install replacement strut assembly available! Monroe® Quick-Strut® units include all the components required for strut replacement in a single, fully-assembled unit. They feature pre-assembled replacement bearing plate, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and a premium strut. This breakthrough design saves on installation time by eliminating having to disassemble components and compress the coil spring prior to installation. Each Quick-Strut® assembly features application-engineered valving to optimize each vehicle's unique ride and handling characteristics. Available for popular passenger car, light truck and SUV applications.
  • Upper Spring Seat: Each new spring seat is engineered to complement the ride control characteristic of the corresponding premium Monroe® strut and upper strut mount. The upper spring seat provides consistent performance without transmitting noise or vibration into the chassis. Also supports the vehicle’s weight and helps properly offset the spring in the strut tower.
  • Bearing Plate: The new bearing plate helps ensure consistent, precise steering return by eliminating “memory steer.” Helps eliminate steering noises commonly associated with worn or corroded bearings. Also improves overall steering smoothness (if equipped - front only)
  • Coil Spring: Manufactured from high-quality U.S. steel, each coil spring is precisely calibrated to support the vehicle’s weight and help ensure correct ride height. Each spring is painted or powder-coated for excellent rust resistance
  • Pre-Assembled Upper Strut Mount: OE-style bearings, SAE-grade nuts and bolts, Superior rubber-to-steel bonding, Plated steel for longer wear, All components manufactured to meet or exceed OE performance
  • Premium Strut: Premium strut technology based on application. Each strut features application-engineered valving to complement each vehicle's unique ride and handling characteristics
  • Boot Kit: The durable strut boot protects the strut rod and seal from dirt and debris. The premium bumper prevents component damage when the suspension bottoms out
  • Spring Isolators: Prevents metal to metal contact and helps eliminate noise between the spring and spring seat
  • Monroe Quick-Strut Complete Strut Assembly

Additional Details:

  • Body Type: B10
  • Body Length: 13.810
  • Compressed Length: 14.490
  • Extended Length: 21.380
  • Travel Length: 6.890
  • Dust Shield: No
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front Right
1
New
048598129772
$175.61
$149.27
$26.34 (15%)
49
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.4L L4Hybrid- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
2.5L L4LE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
2.5L L4SE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
2.5L L4XLE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
Part Name: Suspension Strut and Coil Spring AssemblyBrand: MonroePart#: 172308
2010 Toyota Camry Shock Absorber & Strut Assembly TENNECO MONROE 172308

Monroe Suspension Strut and Coil Spring Assembly 172308

TS

Description:

  • The revolutionary Monroe® Quick-Strut® unit is the first complete, ready-to-install replacement strut assembly available! Monroe® Quick-Strut® units include all the components required for strut replacement in a single, fully-assembled unit. They feature pre-assembled replacement bearing plate, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and a premium strut. This breakthrough design saves on installation time by eliminating having to disassemble components and compress the coil spring prior to installation. Each Quick-Strut® assembly features application-engineered valving to optimize each vehicle's unique ride and handling characteristics. Available for popular passenger car, light truck and SUV applications.
  • Upper Spring Seat: Each new spring seat is engineered to complement the ride control characteristic of the corresponding premium Monroe® strut and upper strut mount. The upper spring seat provides consistent performance without transmitting noise or vibration into the chassis. Also supports the vehicle’s weight and helps properly offset the spring in the strut tower.
  • Bearing Plate: The new bearing plate helps ensure consistent, precise steering return by eliminating “memory steer.” Helps eliminate steering noises commonly associated with worn or corroded bearings. Also improves overall steering smoothness (if equipped - front only)
  • Coil Spring: Manufactured from high-quality U.S. steel, each coil spring is precisely calibrated to support the vehicle’s weight and help ensure correct ride height. Each spring is painted or powder-coated for excellent rust resistance
  • Pre-Assembled Upper Strut Mount: OE-style bearings, SAE-grade nuts and bolts, Superior rubber-to-steel bonding, Plated steel for longer wear, All components manufactured to meet or exceed OE performance
  • Premium Strut: Premium strut technology based on application. Each strut features application-engineered valving to complement each vehicle's unique ride and handling characteristics
  • Boot Kit: The durable strut boot protects the strut rod and seal from dirt and debris. The premium bumper prevents component damage when the suspension bottoms out
  • Spring Isolators: Prevents metal to metal contact and helps eliminate noise between the spring and spring seat
  • Monroe Quick-Strut Complete Strut Assembly

Additional Details:

  • Body Type: B17
  • Body Length: 13.810
  • Compressed Length: 14.490
  • Extended Length: 21.380
  • Travel Length: 6.890
  • Dust Shield: No
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front Left
1
New
048598129840
$175.61
$149.27
$26.34 (15%)
74
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.4L L4Hybrid- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
2.5L L4LE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
2.5L L4SE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
2.5L L4XLE- For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
Part Name: Suspension Strut and Coil Spring AssemblyBrand: KYBPart#: SR4138
No Image

KYB Suspension Strut and Coil Spring Assembly SR4138

KY

Description:

  • Shock Absorber & Strut Assembly KYB SR4138
Front Right
1
New
$159.45
$135.53
$23.92 (15%)
34
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.5L L4LE- Recommended OE Replacement
3.5L V6LE- Recommended OE Replacement
2.5L L4XLE- Recommended OE Replacement
3.5L V6XLE- Recommended OE Replacement
Part Name: Suspension Strut and Coil Spring AssemblyBrand: KYBPart#: SR4139
No Image

KYB Suspension Strut and Coil Spring Assembly SR4139

KY

Description:

  • Shock Absorber & Strut Assembly KYB SR4139
Front Left
1
New
$159.45
$135.53
$23.92 (15%)
29
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.5L L4LE- Recommended OE Replacement
3.5L V6LE- Recommended OE Replacement
2.5L L4XLE- Recommended OE Replacement
3.5L V6XLE- Recommended OE Replacement
Part Name: Suspension Strut and Coil Spring AssemblyBrand: KYBPart#: SR4112
No Image

KYB Suspension Strut and Coil Spring Assembly SR4112

KY

Description:

  • Complete Corner Unit Assembly -Strut, Mount and Spring
Rear Right
1
New
781552694861
$161.41
$137.20
$24.21 (15%)
55
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.5L L4LE- Recommended OE Replacement
3.5L V6LE- Recommended OE Replacement
2.4L L4Hybrid- Recommended OE Replacement
2.5L L4XLE- Recommended OE Replacement
3.5L V6XLE- Recommended OE Replacement
Part Name: Suspension Strut and Coil Spring AssemblyBrand: KYBPart#: SR4113
No Image

KYB Suspension Strut and Coil Spring Assembly SR4113

KY

Description:

  • Complete Corner Unit Assembly -Strut, Mount and Spring
Rear Left
1
New
781552694885
$161.41
$137.20
$24.21 (15%)
47
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
2.5L L4LE- Recommended OE Replacement
3.5L V6LE- Recommended OE Replacement
2.4L L4Hybrid- Recommended OE Replacement
2.5L L4XLE- Recommended OE Replacement
3.5L V6XLE- Recommended OE Replacement