My Vehicle:

Search Filter:
Engine
    x
  • Check All
  • 4.0L V6
  • 4.6L V8
  • 5.7L V8
Brand
    x
  • Check All
  • Bilstein
  • KYB
  • Monroe
  • Rancho
Position
    x
  • Check All
  • Front
  • Front Left
  • Front Right
  • Rear

2013 Toyota Tundra Shock Absorber & Strut Assembly

We have found 14 Shock Absorber & Strut Assembly for
2013 Toyota Tundra 2013 Toyota Tundra
Part Name: Shock AbsorberBrand: MonroePart#: 37298
2013 Toyota Tundra Shock Absorber & Strut Assembly TENNECO MONROE 37298

Monroe Shock Absorber 37298

TS

Description:

  • Monroe® OESpectrum® shock absorbers are engineered specifically for foreign nameplate vehicles and feature the latest global original equipment valving technologies. Developed through years of research and on-vehicle testing, Monroe® OESpectrum® units provide an unprecedented level of handling precision and control while filtering out the ride harshness commonly encountered on many foreign nameplate applications. This unique blend of control and comfort is made possible through Tenneco's 'Twin Technology™ Active Control System', an exclusive internal damping control technology first developed for leading global vehicle manufacturers. Tenneco's Twin Technology™ consists of its latest Impact Control Valve (ICV), which delivers exceptional control under virtually all driving conditions, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
  • Twin Technology™: Impact Control Valve (ICV), delivers exceptional control under virtually all driving conditions, and patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • 5/8-inch (15.9 mm) diameter piston rod (On most applications)
  • 1-3/8 inch (34.9 mm) bore (On most applications)
  • Monroe OESpectrum Light Truck Shock Absorber

Additional Details:

  • Upper Mounting Code: Stem Mount - 2.5/8 Stem Length X 1/2-13 Thread Pitch
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.1/2 Sleeve OAL
  • Compressed Length: 15.000
  • Extended Length: 24.380
  • Travel Length: 9.380
  • Dust Shield: No
  • Parts Pack(s): P1167
  • Cylinder Included: No
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: Yes
  • Extended Hydraulic Lockout: No
Rear
2
New
048598012890
$44.95
$38.21
$6.74 (15%)
87
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
4.0L V6Base- Premium - Limited Lifetime Warranty
4.6L V8Base- Premium - Limited Lifetime Warranty
5.7L V8Base- Premium - Limited Lifetime Warranty
5.7L V8Limited- Premium - Limited Lifetime Warranty
5.7L V8Platinum- Premium - Limited Lifetime Warranty
4.6L V8SR5- Premium - Limited Lifetime Warranty
5.7L V8SR5- Premium - Limited Lifetime Warranty
Part Name: Shock AbsorberBrand: KYBPart#: 349054
2013 Toyota Tundra Shock Absorber & Strut Assembly KYB SHOCKS 349054

KYB Shock Absorber 349054

KY

Description:

  • Gas Shock

Additional Details:

  • Extended Length (in): 24.41
  • Compressed Length (in): 15.19
  • Stroke (in): 9.22
  • Cover: Yes
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: S1(12MM)
  • Lower Mount: E2(12.4x40)
Rear
2
New
781552590293
$48.51
$41.23
$7.28 (15%)
146
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
4.0L V6Base- Recommended OE Replacement DRIVE TYPE: RWD
4.6L V8Base- Recommended OE Replacement DRIVE TYPE: RWD
5.7L V8Base- Recommended OE Replacement DRIVE TYPE: RWD
5.7L V8Limited- Recommended OE Replacement DRIVE TYPE: RWD
5.7L V8Platinum- Recommended OE Replacement DRIVE TYPE: RWD
4.6L V8SR5- Recommended OE Replacement DRIVE TYPE: RWD
5.7L V8SR5- Recommended OE Replacement DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: KYBPart#: 554367
2013 Toyota Tundra Shock Absorber & Strut Assembly KYB SHOCKS 554367

KYB Shock Absorber 554367

KY

Description:

  • High Pressure Monotube Gas Shock

Additional Details:

  • Extended Length (in): 24.09
  • Compressed Length (in): 15.15
  • Stroke (in): 8.94
  • Cover: Yes
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: S1(12MM)
  • Lower Mount: E2(12.4x40)
Rear
2
New
781552595977
$57.65
$49.00
$8.65 (15%)
68
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
4.0L V6BaseDRIVE TYPE: RWD
4.6L V8BaseDRIVE TYPE: RWD
5.7L V8BaseDRIVE TYPE: RWD
5.7L V8LimitedDRIVE TYPE: RWD
5.7L V8PlatinumDRIVE TYPE: RWD
4.6L V8SR5DRIVE TYPE: RWD
5.7L V8SR5DRIVE TYPE: RWD
Part Name: Shock AbsorberBrand: RanchoPart#: RS5324
2013 Toyota Tundra Shock Absorber & Strut Assembly TENNECO MONROE RS5324

Rancho Shock Absorber RS5324

TS

Description:

  • The shock that started it all! Rancho® RS5000™ series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000™ is ideal for on and off-road use, at an affordable price. Covered by Rancho®'s limited lifetime warranty.
  • 1 3/8-in. (35mm) diameter piston (select applications) - Ensures performance in any environment
  • 5/8-in. (16mm) diameter piston rod (select applications) - Adds strength and durability
  • Ten-stage velocity sensitive valving - Provides tuning specific for each vehicle
  • Protective boot included - Protects the shock rod and oil seal
  • Limited Lifetime Warranty - Guarantees your investment
  • Rancho RS5000 Shock Absorber

Additional Details:

  • Upper Mounting Code: Stem Mount - 2.5/8 Stem Length X 1/2-13 Thread Pitch
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.1/2 Sleeve OAL
  • Compressed Length: 15.480
  • Extended Length: 24.650
  • Travel Length: 9.170
  • Dust Shield: Yes
  • Parts Pack(s): P1167
  • Reserve Tube Diameter: 2.180
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Rear
2
New
039703532402
$50.99
What Is MAP Price?
9
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
4.0L V6Base- w/ 0 Rear Raised Height
4.6L V8Base- w/ 0 Rear Raised Height
5.7L V8Base- w/ 0 Rear Raised Height
5.7L V8Limited- w/ 0 Rear Raised Height
5.7L V8Platinum- w/ 0 Rear Raised Height
4.6L V8SR5- w/ 0 Rear Raised Height
5.7L V8SR5- w/ 0 Rear Raised Height
Part Name: Suspension Strut AssemblyBrand: KYBPart#: 551125
2013 Toyota Tundra Shock Absorber & Strut Assembly KYB SHOCKS 551125
2013 Toyota Tundra Shock Absorber & Strut Assembly KYB SHOCKS 551125

KYB Suspension Strut Assembly 551125

KY

Description:

  • High Pressure Monotube Gas Strut

Additional Details:

  • Extended Length (in): 23.54
  • Compressed Length (in): 18.18
  • Stroke (in): 5.36
  • Cover: Yes
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: S1(12MM)
  • Lower Mount: E2(16x40)
Front
2
New
781552597711
$74.82
$63.60
$11.22 (15%)
60
or
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
4.0L V6BaseDRIVE TYPE: RWD
4.6L V8BaseDRIVE TYPE: RWD
5.7L V8BaseDRIVE TYPE: RWD
5.7L V8LimitedDRIVE TYPE: RWD
5.7L V8PlatinumDRIVE TYPE: RWD
4.6L V8SR5DRIVE TYPE: RWD
5.7L V8SR5DRIVE TYPE: RWD
Part Name: Suspension Strut AssemblyBrand: KYBPart#: 341480
2013 Toyota Tundra Shock Absorber & Strut Assembly KYB SHOCKS 341480
2013 Toyota Tundra Shock Absorber & Strut Assembly KYB SHOCKS 3414802013 Toyota Tundra Shock Absorber & Strut Assembly KYB SHOCKS 341480

KYB Suspension Strut Assembly 341480

KY

Description:

  • Gas Strut

Additional Details:

  • Extended Length (in): 23.54
  • Compressed Length (in): 18.18
  • Stroke (in): 5.36
  • Cover: No
  • Rebound Stop: Yes
  • Bump Stop: No
  • Upper Mount: 12x1.50
  • Lower Mount: E2(16x40)
Front
2
New
781552590118
$76.28
$64.84
$11.44 (15%)
74
or
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotesFit Notes
4.0L V6Base- Recommended OE Replacement DRIVE TYPE: RWD
4.6L V8Base- Recommended OE Replacement DRIVE TYPE: RWD
5.7L V8Base- Recommended OE Replacement DRIVE TYPE: RWD
5.7L V8Limited- Recommended OE Replacement DRIVE TYPE: RWD
5.7L V8Platinum- Recommended OE Replacement DRIVE TYPE: RWD
4.6L V8SR5- Recommended OE Replacement DRIVE TYPE: RWD
5.7L V8SR5- Recommended OE Replacement DRIVE TYPE: RWD
Part Name: Suspension Strut AssemblyBrand: KYBPart#: 561002
2013 Toyota Tundra Shock Absorber & Strut Assembly KYB SHOCKS 561002

KYB Suspension Strut Assembly 561002

KY

Description:

  • High Pressure Monotube Gas Strut
Front
2
New
781552694021
$78.51
$66.73
$11.78 (15%)
48
or
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
4.0L V6BaseDRIVE TYPE: RWD
4.6L V8BaseDRIVE TYPE: RWD
5.7L V8BaseDRIVE TYPE: RWD
5.7L V8LimitedDRIVE TYPE: RWD
5.7L V8PlatinumDRIVE TYPE: RWD
4.6L V8SR5DRIVE TYPE: RWD
5.7L V8SR5DRIVE TYPE: RWD
Part Name: Suspension Strut AssemblyBrand: MonroePart#: 71119
2013 Toyota Tundra Shock Absorber & Strut Assembly TENNECO MONROE 71119

Monroe Suspension Strut Assembly 71119

TS

Description:

  • Monroe® OESpectrum® struts are engineered specifically for foreign nameplate vehicles and feature the latest global original equipment valving technologies. Developed through years of research and on-vehicle testing, Monroe® OESpectrum® units provide an unprecedented level of handling precision and control while filtering out the ride harshness commonly encountered on many foreign nameplate applications. This unique blend of control and comfort is made possible through Tenneco's 'Twin Technology™ Active Control System', an exclusive internal damping control technology first developed for leading global vehicle manufacturers. Tenneco's Twin Technology™ consists of its latest Impact Control Valve (ICV), which delivers exceptional control under virtually all driving conditions, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
  • Twin Technology™: Impact Control Valve (ICV), delivers exceptional control under virtually all driving conditions, and patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Rod Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
  • Unique Rod Guide and Single Lip Seal: Bronze reinforced rod guide bearing and special seal provides longer service life and consistent performance.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Hardened and Chrome Plated Piston Rod: Long service life.
  • Monroe OESpectrum Strut

Additional Details:

  • Body Type: SS2
  • Body Length: 17.260
  • Compressed Length: 17.760
  • Extended Length: 24.080
  • Travel Length: 6.320
  • Dust Shield: No
  • Parts Pack(s): P1613
  • Cylinder Included: No
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front
2
New
048598079497
$79.06
$67.20
$11.86 (15%)
35
or
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
4.0L V6Base- Premium - Limited Lifetime Warranty
4.6L V8Base- Premium - Limited Lifetime Warranty
5.7L V8Base- Premium - Limited Lifetime Warranty
5.7L V8Limited- Premium - Limited Lifetime Warranty
5.7L V8Platinum- Premium - Limited Lifetime Warranty
4.6L V8SR5- Premium - Limited Lifetime Warranty
5.7L V8SR5- Premium - Limited Lifetime Warranty
Part Name: Shock AbsorberBrand: BilsteinPart#: 24-186247
2013 Toyota Tundra Shock Absorber & Strut Assembly DRUMS/ROTORS 24-186247

Bilstein Shock Absorber 24-186247

B5

Description:

  • Bilstein 4600 Series Shock Absorbers and Struts are designed specifically to help your truck, van or SUV reach its pinnacle in ride performance and handling, while still providing the comfortable ride that has come to be expected from the name BILSTEIN. A 4600 Series equipped vehicle offers superior control compared to conventional alternatives, allowing you to keep cargo secure-from your kids to work equipment, mile after mile. Utilizing our patented design, the dampers allow the vehicle to glide over every type of road surface you may encounter while maintaining complete command at all times. These dampers are the least expensive and most effective upgrade to extend the service life of any vehicle out on the road today.
  • 46mm Monotube Shock Absorber

Additional Details:

  • Series: 4600 Series
  • Boot Included: Blue Straight
  • Internal Design: Monotube
  • Lower Mount Type: Eye 12.4mm
  • Upper Mount Type: Stem
  • Finish: Yellow Paint
Rear
2
New
651860592770
$87.56
$74.43
$13.13 (15%)
11
or
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
5.7L V8Limited- Series: 4600 Series
4.0L V6Base- Series: 4600 Series
4.6L V8Base- Series: 4600 Series
5.7L V8Base- Series: 4600 Series
Part Name: Suspension Strut and Coil Spring AssemblyBrand: MonroePart#: 171119L
2013 Toyota Tundra Shock Absorber & Strut Assembly TENNECO MONROE 171119L

Monroe Suspension Strut and Coil Spring Assembly 171119L

TS

Description:

  • The revolutionary Monroe® Quick-Strut® unit is the first complete, ready-to-install replacement strut assembly available! Monroe® Quick-Strut® units include all the components required for strut replacement in a single, fully-assembled unit. They feature pre-assembled replacement bearing plate, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and a premium strut. This breakthrough design saves on installation time by eliminating having to disassemble components and compress the coil spring prior to installation. Each Quick-Strut® assembly features application-engineered valving to optimize each vehicle's unique ride and handling characteristics. Available for popular passenger car, light truck and SUV applications.
  • Upper Spring Seat: Each new spring seat is engineered to complement the ride control characteristic of the corresponding premium Monroe® strut and upper strut mount. The upper spring seat provides consistent performance without transmitting noise or vibration into the chassis. Also supports the vehicle’s weight and helps properly offset the spring in the strut tower.
  • Bearing Plate: The new bearing plate helps ensure consistent, precise steering return by eliminating “memory steer.” Helps eliminate steering noises commonly associated with worn or corroded bearings. Also improves overall steering smoothness (if equipped - front only)
  • Coil Spring: Manufactured from high-quality U.S. steel, each coil spring is precisely calibrated to support the vehicle’s weight and help ensure correct ride height. Each spring is painted or powder-coated for excellent rust resistance
  • Pre-Assembled Upper Strut Mount: OE-style bearings, SAE-grade nuts and bolts, Superior rubber-to-steel bonding, Plated steel for longer wear, All components manufactured to meet or exceed OE performance
  • Premium Strut: Premium strut technology based on application. Each strut features application-engineered valving to complement each vehicle's unique ride and handling characteristics
  • Boot Kit: The durable strut boot protects the strut rod and seal from dirt and debris. The premium bumper prevents component damage when the suspension bottoms out
  • Spring Isolators: Prevents metal to metal contact and helps eliminate noise between the spring and spring seat
  • Monroe Quick-Strut Complete Strut Assembly

Additional Details:

  • Body Type: Special Mount
  • Body Length: 17.260
  • Compressed Length: 17.760
  • Extended Length: 23.520
  • Travel Length: 5.760
  • Dust Shield: Yes
  • Parts Pack(s): P1123
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front Left
1
New
048598082497
$128.06
$108.85
$19.21 (15%)
24
or
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
4.0L V6Base- Except TRD Package; Except CrewMax; For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
4.6L V8Base- Except TRD Package; Except CrewMax; For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
5.7L V8Base- Except TRD Package; Except CrewMax; For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
5.7L V8Limited- Except TRD Package; Except CrewMax; For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
5.7L V8Platinum- Except TRD Package; Except CrewMax; For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
4.6L V8SR5- Except TRD Package; Except CrewMax; For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
5.7L V8SR5- Except TRD Package; Except CrewMax; For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
Part Name: Suspension Strut and Coil Spring AssemblyBrand: MonroePart#: 171119R
2013 Toyota Tundra Shock Absorber & Strut Assembly TENNECO MONROE 171119R

Monroe Suspension Strut and Coil Spring Assembly 171119R

TS

Description:

  • The revolutionary Monroe® Quick-Strut® unit is the first complete, ready-to-install replacement strut assembly available! Monroe® Quick-Strut® units include all the components required for strut replacement in a single, fully-assembled unit. They feature pre-assembled replacement bearing plate, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and a premium strut. This breakthrough design saves on installation time by eliminating having to disassemble components and compress the coil spring prior to installation. Each Quick-Strut® assembly features application-engineered valving to optimize each vehicle's unique ride and handling characteristics. Available for popular passenger car, light truck and SUV applications.
  • Upper Spring Seat: Each new spring seat is engineered to complement the ride control characteristic of the corresponding premium Monroe® strut and upper strut mount. The upper spring seat provides consistent performance without transmitting noise or vibration into the chassis. Also supports the vehicle’s weight and helps properly offset the spring in the strut tower.
  • Bearing Plate: The new bearing plate helps ensure consistent, precise steering return by eliminating “memory steer.” Helps eliminate steering noises commonly associated with worn or corroded bearings. Also improves overall steering smoothness (if equipped - front only)
  • Coil Spring: Manufactured from high-quality U.S. steel, each coil spring is precisely calibrated to support the vehicle’s weight and help ensure correct ride height. Each spring is painted or powder-coated for excellent rust resistance
  • Pre-Assembled Upper Strut Mount: OE-style bearings, SAE-grade nuts and bolts, Superior rubber-to-steel bonding, Plated steel for longer wear, All components manufactured to meet or exceed OE performance
  • Premium Strut: Premium strut technology based on application. Each strut features application-engineered valving to complement each vehicle's unique ride and handling characteristics
  • Boot Kit: The durable strut boot protects the strut rod and seal from dirt and debris. The premium bumper prevents component damage when the suspension bottoms out
  • Spring Isolators: Prevents metal to metal contact and helps eliminate noise between the spring and spring seat
  • Monroe Quick-Strut Complete Strut Assembly

Additional Details:

  • Body Type: Special Mount
  • Body Length: 17.260
  • Compressed Length: 17.760
  • Extended Length: 23.520
  • Travel Length: 5.760
  • Dust Shield: Yes
  • Parts Pack(s): P1123
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front Right
1
New
048598082503
$128.06
$108.85
$19.21 (15%)
30
or
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
4.0L V6Base- Except TRD Package; Except CrewMax; For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
4.6L V8Base- Except TRD Package; Except CrewMax; For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
5.7L V8Base- Except TRD Package; Except CrewMax; For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
5.7L V8Limited- Except TRD Package; Except CrewMax; For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
5.7L V8Platinum- Except TRD Package; Except CrewMax; For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
4.6L V8SR5- Except TRD Package; Except CrewMax; For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
5.7L V8SR5- Except TRD Package; Except CrewMax; For Commercial Usage Refer to Product Warranty; Premium - Limited Lifetime Warranty
Part Name: Suspension Strut AssemblyBrand: RanchoPart#: RS5758
2013 Toyota Tundra Shock Absorber & Strut Assembly TENNECO MONROE RS5758

Rancho Suspension Strut Assembly RS5758

TS

Description:

  • Rancho® RS5000™ struts are available most popular applications at an incredible value. RS5000™ struts feature twin-tube construction with 10-stage velocity sensitive valving - for stability and control engineered to each vehicle model.
  • High-grade all weather hydraulic fluid - Contains special modifiers to reduce friction and ensure smooth rod reaction
  • Ten-stage velocity sensitive valving
  • Ideal for on and off-road use
  • Improved handling and control
  • Nitrogen gas charged
  • Rancho RS5000 Strut

Additional Details:

  • Body Type: SS2
  • Body Length: 17.260
  • Compressed Length: 17.760
  • Extended Length: 23.520
  • Travel Length: 5.760
  • Dust Shield: Yes
  • Parts Pack(s): P1613
  • Cylinder Included: No
  • Reserve Tube Diameter: 2.000
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Front
2
New
039703575805
$110.99
What Is MAP Price?
1
or
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
4.0L V6Base- w/ 0 Front Raised Height
4.6L V8Base- w/ 0 Front Raised Height
5.7L V8Base- w/ 0 Front Raised Height
5.7L V8Limited- w/ 0 Front Raised Height
5.7L V8Platinum- w/ 0 Front Raised Height
4.6L V8SR5- w/ 0 Front Raised Height
5.7L V8SR5- w/ 0 Front Raised Height
Part Name: Shock AbsorberBrand: RanchoPart#: RS999324
2013 Toyota Tundra Shock Absorber & Strut Assembly TENNECO MONROE RS999324

Rancho Shock Absorber RS999324

TS

Description:

  • Rancho's® new RS9000XL shock absorbers feature adjustable damping with either a 2.75- or 2.38-in. diameter reserve tube. This massive shock body allows the RS9000XL to run cooler and more consistent even under the most demanding towing conditions, enhancing performance and durability, and is constructed with a larger than typical 18-mm diameter chromed piston rod. Rancho® RS9000XL™ shock series are engineered with nine position tuning technology that provides nine different levels of shock performance. These premium shocks also have polyurethane bushings that enhance shock performance and durability along with a boot that protects the shock rod and oil seal.
  • 2.75-in. (70mm) body diameter (select applications) - Delivers both performance and appearance
  • 9-position tuning technology - Provides 9 different levels of shock performance
  • Protective boot included - Added protection for the shock rod and oil seal
  • Polyurethane bushings - Enhance shock performance and durability
  • Limited Lifetime Warranty and 90-day free ride offer
  • Liquid metallic finish - Premium long lasting finish
  • Nitrogen gas charged - Optimizes shock performance
  • Large 18mm Nitro Carb rod - strong and durable
  • Rancho RS9000XL Shock Absorber

Additional Details:

  • Upper Mounting Code: Stem Mount - 2.5/8 Stem Length X 1/2-13 Thread Pitch
  • Lower Mounting Code: Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.5/8 Sleeve OAL
  • Compressed Length: 15.500
  • Extended Length: 24.688
  • Travel Length: 9.188
  • Dust Shield: Yes
  • Parts Pack(s): P1356
  • Reserve Tube Diameter: 2.750
  • Compressed Bumper Stop: No
  • Extended Bumper Stop: No
  • Extended Hydraulic Lockout: No
Rear
2
New
039703093248
$110.99
What Is MAP Price?
4
or
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelNotes
4.0L V6Base- w/ 0 Rear Raised Height; w/o Rancho quickLift System
4.6L V8Base- w/ 0 Rear Raised Height; w/o Rancho quickLift System
5.7L V8Base- w/ 0 Rear Raised Height; w/o Rancho quickLift System
5.7L V8Limited- w/ 0 Rear Raised Height; w/o Rancho quickLift System
5.7L V8Platinum- w/ 0 Rear Raised Height; w/o Rancho quickLift System
4.6L V8SR5- w/ 0 Rear Raised Height; w/o Rancho quickLift System
5.7L V8SR5- w/ 0 Rear Raised Height; w/o Rancho quickLift System
Part Name: Shock AbsorberBrand: KYBPart#: 565133
No Image

KYB Shock Absorber 565133

KY

Description:

  • High Pressure Monotube Gas Shock
Rear
2
New
781552696124
$68.60
$58.31
$10.29 (15%)
66
or
2 Years WarrantyFast ShippingFlat 15% Off
  This part fits following vehicles.
EngineSub ModelFit Notes
4.0L V6BaseDRIVE TYPE: RWD
4.6L V8BaseDRIVE TYPE: RWD
5.7L V8BaseDRIVE TYPE: RWD
5.7L V8LimitedDRIVE TYPE: RWD
5.7L V8PlatinumDRIVE TYPE: RWD
4.6L V8SR5DRIVE TYPE: RWD
5.7L V8SR5DRIVE TYPE: RWD