1995 Acura Integra HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18801

Gates HVAC Heater Hose 18801 - Heater To Valve-1

Position: Heater To Valve-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.5
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1995 Acura Integra Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 LS, RS, Special Edition Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Valve-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	LS, RS, Special Edition	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Valve-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19140

1995 Acura Integra HVAC Heater Hose ZO 19140

Gates HVAC Heater Hose 19140 - Heater To Thermostat

Position: Heater To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.7
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1995 Acura Integra Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 LS, RS, Special Edition Molded Heater Hose Fuel Type: GAS Heater To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	LS, RS, Special Edition	Molded Heater Hose	Fuel Type: GAS	Heater To Thermostat

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87839

1995 Acura Integra HVAC Heater Hose DY 87839

Dayco HVAC Heater Hose 87839 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1995 Acura Integra Engines.
Engine Sub Model Notes Position
1.8L L4 GS-R Small I.D. Heater Hose Heater To Pipe
Part Interchange
ACDelco 16028M
CARQUEST 18446
Duralast D87839
Gates 18446
General Motors 15776162
General Motors 22627221
Goodyear 63986
NAPA 10446
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
1.8L L4	GS-R	Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80404

1995 Acura Integra HVAC Heater Hose DY 80404

Dayco HVAC Heater Hose 80404 - Valve To Intake Manifold

Position: Valve To Intake Manifold

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 24
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 1995 Acura Integra Engines.
Engine Sub Model Notes Position
1.8L L4 LS, RS, Special Edition 90? Molded Coolant Hose Valve To Intake Manifold

Engine	Sub Model	Notes	Position
1.8L L4	LS, RS, Special Edition	90? Molded Coolant Hose	Valve To Intake Manifold

Part Interchange

ACDelco	18367L
ACDelco	18240L
ACDelco	18287L
ACDelco	18151L
ACDelco	18393L
ACDelco	18231L
Acura	79721-SR3-J30
Atlas	MH-64
CARQUEST	28470
CARQUEST	19532
CARQUEST	19142
CARQUEST	19120
CARQUEST	19103
CARQUEST	19458
Chrysler	55037228
Chrysler	4662215
Chrysler	55036924
Duralast	E80404
Ford	5L84-18K579-AH
Ford	F6DZ-18472A
Ford	F50Y-18472-B
Ford	F50H-18K579-AC
Ford	99BB-18C553-AC
Ford	F50Y-18472-A
Ford	F80H-18K580-AC
Ford	F6DZ-18472-GA
Ford	F50H-18K580-AA
Ford	F80Z-18472-AB
Ford	F87H-18472-CA
Freshstart	4105
Gates	19103
Gates	19142
Gates	19120
Gates	19458
Gates	28470
Gates	19532
General Motors	10427571
General Motors	10317834
General Motors	10021566
General Motors	10294247
General Motors	10415189
General Motors	10400424
General Motors	52362096
Goodyear	63824
Honda	79725-SCV-A00
Hyundai	97321-25160
Hyundai	97321-26100
Hyundai	97322-26100
Mazda	GK3J-61-24XD
Mazda	3K3J-61-24XD
NAPA	11142
NAPA	11120
NAPA	11103
NAPA	11458
NAPA	11532
NAPA	9811
Pirelli	43824
Toyota	87245-42200
Toyota	87245-3D480

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

1995 Acura Integra HVAC Heater Hose ZO 28466

Gates HVAC Heater Hose 28466 - Heater To Valve-1

Position: Heater To Valve-1

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1995 Acura Integra Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 GS-R Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Heater To Valve-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	GS-R	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Valve-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19142

1995 Acura Integra HVAC Heater Hose ZO 19142

Gates HVAC Heater Hose 19142 - Valve-1 To Intake Manifold

Position: Valve-1 To Intake Manifold

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20.2
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1995 Acura Integra Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 LS, RS, Special Edition Molded Heater Hose Fuel Type: GAS Valve-1 To Intake Manifold
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	LS, RS, Special Edition	Molded Heater Hose	Fuel Type: GAS	Valve-1 To Intake Manifold

Part Name: HVAC Heater HoseBrand: GatesPart#: 18021

1995 Acura Integra HVAC Heater Hose ZO 18021

Gates HVAC Heater Hose 18021 - Intake Manifold To Pipe-1

Position: Intake Manifold To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1995 Acura Integra Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 LS, RS, Special Edition Cut to fit - Molded Heater Hose Fuel Type: GAS Intake Manifold To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	LS, RS, Special Edition	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Intake Manifold To Pipe-1

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87875

1995 Acura Integra HVAC Heater Hose DY 87875

Dayco HVAC Heater Hose 87875 - Heater To Thermostat

Position: Heater To Thermostat

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 15/16
End 2 Inside Diameter : 5/8
End 2 Outside Diameter : 15/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1995 Acura Integra Engines.
Engine Sub Model Notes Position
1.8L L4 LS, RS, Special Edition Small I.D. Heater Hose Heater To Thermostat

Engine	Sub Model	Notes	Position
1.8L L4	LS, RS, Special Edition	Small I.D. Heater Hose	Heater To Thermostat

Part Interchange

ACDelco	16401M
ACDelco	16402M
ACDelco	14298S
ACDelco	16089M
Acura	79725-SR3-J30
CARQUEST	19423
CARQUEST	19140
CARQUEST	18866
Duralast	D87875
Gates	19422
Gates	19423
Gates	19140
Gates	18866
Goodyear	63257
Goodyear	64403
NAPA	11423
NAPA	11140
NAPA	10866
NAPA	11422
Subaru (cars)	72411-FE020
Subaru (cars)	72411-FE010
Subaru (cars)	72411-FE023

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19144

1995 Acura Integra HVAC Heater Hose ZO 19144

Gates HVAC Heater Hose 19144 - Valve-1 To Intake Manifold

Position: Valve-1 To Intake Manifold

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 23.9
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1995 Acura Integra Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 GS-R Molded Heater Hose Fuel Type: GAS Valve-1 To Intake Manifold
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	GS-R	Molded Heater Hose	Fuel Type: GAS	Valve-1 To Intake Manifold

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

1995 Acura Integra HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Engine To Throttle Body, Pipe-2 To Pipe-3, Intake Manifold To Pipe-2, Throttle Body To Valve-2, Valve-2 To Pipe-4

Position: Engine To Throttle Body, Pipe-2 To Pipe-3, Intake Manifold To Pipe-2, Throttle Body To Valve-2, Valve-2 To Pipe-4

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1995 Acura Integra Engines.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	GS-R	Cut to Length, 8" - Straight Heater Hose (Standard)	Fuel Type: GAS	Engine To Throttle Body, Pipe-2 To Pipe-3, Intake Manifold To Pipe-2, Throttle Body To Valve-2, Valve-2 To Pipe-4

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	16028M
CARQUEST	18446
Duralast	D87839
Gates	18446
General Motors	15776162
General Motors	22627221
Goodyear	63986
NAPA	10446

My Vehicle:

1995 Acura Integra HVAC Heater Hose

Gates HVAC Heater Hose 18801 - Heater To Valve-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19140 - Heater To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87839 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80404 - Valve To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28466 - Heater To Valve-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19142 - Valve-1 To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18021 - Intake Manifold To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87875 - Heater To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19144 - Valve-1 To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Engine To Throttle Body, Pipe-2 To Pipe-3, Intake Manifold To Pipe-2, Throttle Body To Valve-2, Valve-2 To Pipe-4

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X