2003 Audi A4 HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18274

Gates HVAC Heater Hose 18274 - Pipe-2 To Reservoir

Position: Pipe-2 To Reservoir

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.3
Inside Diameter 1 : .3
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Audi A4 Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 Base, Cabrio, Cabriolet, Confort, Luxury, Vangard Molded Heater Hose Fuel Type: GAS Pipe-2 To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	Base, Cabrio, Cabriolet, Confort, Luxury, Vangard	Molded Heater Hose	Fuel Type: GAS	Pipe-2 To Reservoir

Part Name: HVAC Heater HoseBrand: CRPPart#: CHH0167R

2003 Audi A4 HVAC Heater Hose C8 CHH0167R

CRP HVAC Heater Hose CHH0167R - Heater Inlet To Flange

Position: Heater Inlet To Flange

Description:

Rein OE Quality Heater Hose
Heater Hose

Condition: New

Fitments
This Part Fits Following 2003 Audi A4 Engines.
Engine Sub Model Notes Position
1.8L L4 Base, Cabrio, Cabriolet, Confort, Luxury, Vangard w/Quick Connectors Heater Inlet To Flange
Warranty & Easy Return
Manufacturer’s Warranty : 24 months / 24,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
1.8L L4	Base, Cabrio, Cabriolet, Confort, Luxury, Vangard	w/Quick Connectors	Heater Inlet To Flange

Part Name: HVAC Heater HoseBrand: GatesPart#: 18273

Gates HVAC Heater Hose 18273 - Pipe-2 To Turbo

Position: Pipe-2 To Turbo

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 22.2
Inside Diameter 1 : .3
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Audi A4 Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 Base, Cabrio, Cabriolet, Confort, Luxury, Vangard Molded Heater Hose Fuel Type: GAS Pipe-2 To Turbo
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	Base, Cabrio, Cabriolet, Confort, Luxury, Vangard	Molded Heater Hose	Fuel Type: GAS	Pipe-2 To Turbo

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88510

Dayco HVAC Heater Hose 88510 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 13 1/2
End 1 Inside Diameter : 3/4
End 1 Outside Diameter : 1 1/16
End 2 Inside Diameter : 3/4
End 2 Outside Diameter : 1 1/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2003 Audi A4 Engines.
Engine Sub Model Notes Position
1.8L L4 Base, Cabriolet Small I.D. Heater Hose Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
1.8L L4	Base, Cabriolet	Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Position: Radiator To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2003 Audi A4 Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 Base, Cabrio, Cabriolet, Confort, Luxury, Vangard Cut to Length, 17" - Straight Heater Hose (Standard) Fuel Type: GAS Radiator To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	Base, Cabrio, Cabriolet, Confort, Luxury, Vangard	Cut to Length, 17" - Straight Heater Hose (Standard)	Fuel Type: GAS	Radiator To Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 24350

Gates HVAC Heater Hose 24350 - Heater (Lower)

Position: Heater (Lower)

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 21
Inside Diameter 1 : .68
Inside Diameter 2 : .77
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Audi A4 Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 Base, Cabrio, Cabriolet, Confort, Luxury, Vangard Molded Coolant Hose Fuel Type: GAS Heater (Lower)
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

Gates HVAC Heater Hose 18274 - Pipe-2 To Reservoir

Description:

Part Specifications:

Features:

CRP HVAC Heater Hose CHH0167R - Heater Inlet To Flange

Description:

Gates HVAC Heater Hose 18273 - Pipe-2 To Turbo

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88510 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24350 - Heater (Lower)

Description:

Part Specifications:

Features:

Related HVAC Parts

My Vehicle:

2003 Audi A4 HVAC Heater Hose

Gates HVAC Heater Hose 18274 - Pipe-2 To Reservoir

Description:

Part Specifications:

Features:

CRP HVAC Heater Hose CHH0167R - Heater Inlet To Flange

Description:

Gates HVAC Heater Hose 18273 - Pipe-2 To Turbo

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88510 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24350 - Heater (Lower)

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X