2002 BMW 530i HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: CRPPart#: CHH0442

CRP HVAC Heater Hose CHH0442 - Engine Inlet To Water Valve

Position: Engine Inlet To Water Valve

Description:

Rein OE Quality Heater Hose
Heater Hose

Condition: New

Fitments
This Part Fits Following 2002 BMW 530i Engines.
Engine Sub Model Notes Position
3.0L L6 Base w/Quick Connectors Engine Inlet To Water Valve
Warranty & Easy Return
Manufacturer’s Warranty : 24 months / 24,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L L6	Base	w/Quick Connectors	Engine Inlet To Water Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88505

Dayco HVAC Heater Hose 88505 - Reservoir To Auxiliary Water Pump

Position: Reservoir To Auxiliary Water Pump

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 21 1/2
End 1 Inside Diameter : 31/32
End 1 Outside Diameter : 1 11/32
End 2 Inside Diameter : 31/32
End 2 Outside Diameter : 1 11/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2002 BMW 530i Engines.
Engine Sub Model Notes Position
3.0L L6 Base w/Quick Connectors - Small I.D. Heater Hose Reservoir To Auxiliary Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L L6	Base	w/Quick Connectors - Small I.D. Heater Hose	Reservoir To Auxiliary Water Pump

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88506

Dayco HVAC Heater Hose 88506 - Auxiliary Water Pump To Pipe

Position: Auxiliary Water Pump To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 20 1/2
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 1 13/32
End 2 Inside Diameter : 5/8
End 2 Outside Diameter : 1 13/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2002 BMW 530i Engines.
Engine Sub Model Notes Position
3.0L L6 Base Small I.D. Heater Hose Auxiliary Water Pump To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L L6	Base	Small I.D. Heater Hose	Auxiliary Water Pump To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88507

Dayco HVAC Heater Hose 88507 - Expansion Tank To Heater Core

Position: Expansion Tank To Heater Core

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 27 1/2
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 7/8
End 2 Inside Diameter : 7/8
End 2 Outside Diameter : 1 13/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2002 BMW 530i Engines.
Engine Sub Model Notes Position
3.0L L6 Base Small I.D. Heater Hose Expansion Tank To Heater Core
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L L6	Base	Small I.D. Heater Hose	Expansion Tank To Heater Core

Part Name: HVAC Heater HoseBrand: GatesPart#: 24105

Gates HVAC Heater Hose 24105 - Reservoir To Auxiliary Water Pump

Position: Reservoir To Auxiliary Water Pump

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 23.5
Inside Diameter 1 : .90
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 BMW 530i Engines.
Engine Sub Model Notes Fit Notes Position
3.0L L6 Base Molded Coolant Hose Fuel Type: GAS Reservoir To Auxiliary Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L L6	Base	Molded Coolant Hose	Fuel Type: GAS	Reservoir To Auxiliary Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 24128

Gates HVAC Heater Hose 24128 - Auxiliary Water Pump Outlet

Position: Auxiliary Water Pump Outlet

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 25.25
Inside Diameter 1 : .85
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 BMW 530i Engines.
Engine Sub Model Notes Fit Notes Position
3.0L L6 Base Molded Coolant Hose Fuel Type: GAS Auxiliary Water Pump Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L L6	Base	Molded Coolant Hose	Fuel Type: GAS	Auxiliary Water Pump Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 24130

Gates HVAC Heater Hose 24130 - Connector To Reservoir

Position: Connector To Reservoir

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 34.25
Inside Diameter 1 : .9
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 BMW 530i Engines.
Engine Sub Model Notes Fit Notes Position
3.0L L6 Base Molded Coolant Hose Fuel Type: GAS Connector To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2002 BMW 530i HVAC Heater Hose

CRP HVAC Heater Hose CHH0442 - Engine Inlet To Water Valve

Description:

Dayco HVAC Heater Hose 88505 - Reservoir To Auxiliary Water Pump

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88506 - Auxiliary Water Pump To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88507 - Expansion Tank To Heater Core

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24105 - Reservoir To Auxiliary Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24128 - Auxiliary Water Pump Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24130 - Connector To Reservoir

Description:

Part Specifications:

Features:

Related HVAC Parts

My Vehicle:

2002 BMW 530i HVAC Heater Hose

CRP HVAC Heater Hose CHH0442 - Engine Inlet To Water Valve

Description:

Dayco HVAC Heater Hose 88505 - Reservoir To Auxiliary Water Pump

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88506 - Auxiliary Water Pump To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88507 - Expansion Tank To Heater Core

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24105 - Reservoir To Auxiliary Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24128 - Auxiliary Water Pump Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24130 - Connector To Reservoir

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X