Home

2001 BMW 540i

My Vehicle:

2001 BMW 540i HVAC Heater Hose

We have found 3 HVAC Heater Hose for

2001 BMW 540i

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87670

Dayco HVAC Heater Hose 87670 - Heater Hose

Position: Heater Hose

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2001 BMW 540i Engines.
Engine Sub Model Notes Position
4.4L V8 Base Cut to Fit - Small I.D. Heater Hose Heater Hose
Part Interchange
ACDelco 14114S
CARQUEST 18813
Duralast B87670
Ford 1L5Z18472AA
Freshstart 63206
Freshstart 4483
Gates 18813
Goodyear 63206
Goodyear 63210
NAPA 10813
V&W 303670
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.4L V8	Base	Cut to Fit - Small I.D. Heater Hose	Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 24122

Gates HVAC Heater Hose 24122 - Heater To Engine

Position: Heater To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 8.19
Inside Diameter 1 : .71
Inside Diameter 2 : .87
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 BMW 540i Engines.
Engine Sub Model Notes Fit Notes Position
4.4L V8 Base Molded Coolant Hose Fuel Type: GAS Heater To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.4L V8	Base	Molded Coolant Hose	Fuel Type: GAS	Heater To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 24241

Gates HVAC Heater Hose 24241 - Transmission Oil Cooler To Pipe

Position: Transmission Oil Cooler To Pipe

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 9
Inside Diameter 1 : .57
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 BMW 540i Engines.
Engine Sub Model Notes Fit Notes Position
4.4L V8 Base Molded Coolant Hose Fuel Type: GAS Transmission Oil Cooler To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14114S
CARQUEST	18813
Duralast	B87670
Ford	1L5Z18472AA
Freshstart	63206
Freshstart	4483
Gates	18813
Goodyear	63206
Goodyear	63210
NAPA	10813
V&W	303670

My Vehicle:

2001 BMW 540i HVAC Heater Hose

Dayco HVAC Heater Hose 87670 - Heater Hose

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24122 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24241 - Transmission Oil Cooler To Pipe

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X