2006 Buick Rainier HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87828

Dayco HVAC Heater Hose 87828 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Buick Rainier Engines.
Engine Sub Model Notes Position
5.3L V8 CXL Reuse OEM Connector - Small I.D. Heater Hose Heater Inlet

Engine	Sub Model	Notes	Position
5.3L V8	CXL	Reuse OEM Connector - Small I.D. Heater Hose	Heater Inlet

Part Interchange

ACDelco	16216M
ACDelco	16057M
ACDelco	16580M
CARQUEST	18783
CARQUEST	19175
CARQUEST	18516
Chrysler	55056618AA
Duralast	E87828
Gates	18783
Gates	19175
Gates	18516
General Motors	15128104
Honda	79725-S10-K01
Hyundai	97212-2E000
Hyundai	97312-2E000
NAPA	10516
NAPA	10783
NAPA	11175

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 71877

2006 Buick Rainier HVAC Heater Hose DY 71877

Dayco HVAC Heater Hose 71877 - Pipe To Engine

Position: Pipe To Engine

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 5
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2006 Buick Rainier Engines.
Engine Sub Model Notes Position
4.2L L6 CXL Curved Radiator Hose Pipe To Engine

Engine	Sub Model	Notes	Position
4.2L L6	CXL	Curved Radiator Hose	Pipe To Engine

Part Interchange

ACDelco	14314S
ACDelco	14155S
ACDelco	14099S
CARQUEST	18453
CARQUEST	18791
CARQUEST	19025
Duralast	A71877
Ford	F65E-8A582-AO
Ford	1L2Z-18472-BD
Freshstart	4622
Gates	19025
Gates	18791
Gates	18453
General Motors	10242185
General Motors	55565952
General Motors	12593464
General Motors	25862087
General Motors	15138450
General Motors	15832905
Goodyear	63981
Goodyear	63348
Motorcraft	KH101
NAPA	10453
NAPA	11025
NAPA	10791
Toyota	87245-35A50

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28474

2006 Buick Rainier HVAC Heater Hose ZO 28474

Gates HVAC Heater Hose 28474 - Pipe-1 To Thermostat

Position: Pipe-1 To Thermostat

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .75
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2006 Buick Rainier Engines.
Engine Sub Model Notes Fit Notes Position
5.3L V8 CXL Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Pipe-1 To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.3L V8	CXL	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Thermostat

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87851

2006 Buick Rainier HVAC Heater Hose DY 87851

Dayco HVAC Heater Hose 87851 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 10-1/2
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Buick Rainier Engines.
Engine Sub Model Notes Position
4.2L L6 CXL Small I.D. Heater Hose Heater To Pipe

Engine	Sub Model	Notes	Position
4.2L L6	CXL	Small I.D. Heater Hose	Heater To Pipe

Part Interchange

ACDelco	14153S
ACDelco	20496S
ACDelco	14138S
CARQUEST	19023
CARQUEST	18952
CARQUEST	23333
Duralast	C87851
Gates	19023
Gates	23333
Gates	18952
General Motors	15832905
General Motors	19129948
General Motors	15138450
NAPA	11023
NAPA	16071
NAPA	10952

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18453

2006 Buick Rainier HVAC Heater Hose ZO 18453

Gates HVAC Heater Hose 18453 - Pipe-1 To Engine

Position: Pipe-1 To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.1
Inside Diameter 1 : .58
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Buick Rainier Engines.
Engine Sub Model Notes Fit Notes Position
4.2L L6 CXL Molded Heater Hose Fuel Type: GAS Pipe-1 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.2L L6	CXL	Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

2006 Buick Rainier HVAC Heater Hose ZO 28466

Gates HVAC Heater Hose 28466 - Thermostat To Pipe-2

Position: Thermostat To Pipe-2

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2006 Buick Rainier Engines.
Engine Sub Model Notes Fit Notes Position
5.3L V8 CXL Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Thermostat To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.3L V8	CXL	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Thermostat To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 18952

2006 Buick Rainier HVAC Heater Hose ZO 18952

Gates HVAC Heater Hose 18952 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 14.2
Inside Diameter 1 : .62
Inside Diameter 2 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Buick Rainier Engines.
Engine Sub Model Notes Fit Notes Position
4.2L L6 CXL Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.2L L6	CXL	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19178

2006 Buick Rainier HVAC Heater Hose ZO 19178

Gates HVAC Heater Hose 19178 - Pipe-2 To Heater

Position: Pipe-2 To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 22.6
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Buick Rainier Engines.
Engine Sub Model Notes Fit Notes Position
5.3L V8 CXL Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-2 To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.3L V8	CXL	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-2 To Heater

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87909

2006 Buick Rainier HVAC Heater Hose DY 87909

Dayco HVAC Heater Hose 87909 - Right

Position: Right

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 9
End 1 Inside Diameter : 3/4
End 1 Outside Diameter : 1 1/16
End 2 Inside Diameter : 3/4
End 2 Outside Diameter : 1 1/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

This Dayco® Molded Heater Hose branched assembly is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2006 Buick Rainier Engines.
Engine Sub Model Notes Position
4.2L L6 CXL Small I.D. Heater Hose Right
Part Interchange
ACDelco 20498S
CARQUEST 23336
Duralast C87909
Gates 23336
General Motors 15129782
Isuzu 8-15129-782
NAPA 16074
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.2L L6	CXL	Small I.D. Heater Hose	Right

Part Name: HVAC Heater HoseBrand: GatesPart#: 23336

2006 Buick Rainier HVAC Heater Hose ZO 23336

Gates HVAC Heater Hose 23336 - Engine To Heater

Position: Engine To Heater

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 13
Inside Diameter 1 : .75
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Buick Rainier Engines.
Engine Sub Model Notes Fit Notes Position
4.2L L6 CXL Molded Coolant Hose Fuel Type: GAS Engine To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.2L L6	CXL	Molded Coolant Hose	Fuel Type: GAS	Engine To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

2006 Buick Rainier HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Pipe-1 To Engine, Radiator To Reservoir

Position: Pipe-1 To Engine, Radiator To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2006 Buick Rainier Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.2L L6	CXL	Cut to Length, 35" - Straight Heater Hose (Standard)	Fuel Type: GAS	Radiator To Reservoir
5.3L V8	CXL	Cut to Length, 35" - Straight Heater Hose (Standard)	Fuel Type: GAS	Pipe-1 To Engine, Radiator To Reservoir

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2006 Buick Rainier HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Auxiliary Heater To Pipe-4, Pipe-3 To Auxiliary Heater

Position: Auxiliary Heater To Pipe-4, Pipe-3 To Auxiliary Heater

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2006 Buick Rainier Engines.
Engine Sub Model Notes Fit Notes Position
5.3L V8 CXL Cut to Length, 18" - Straight Heater Hose (Standard) Fuel Type: GAS Auxiliary Heater To Pipe-4, Pipe-3 To Auxiliary Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	20498S
CARQUEST	23336
Duralast	C87909
Gates	23336
General Motors	15129782
Isuzu	8-15129-782
NAPA	16074

My Vehicle:

2006 Buick Rainier HVAC Heater Hose

Dayco HVAC Heater Hose 87828 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 71877 - Pipe To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28474 - Pipe-1 To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87851 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18453 - Pipe-1 To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28466 - Thermostat To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18952 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19178 - Pipe-2 To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87909 - Right

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 23336 - Engine To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Pipe-1 To Engine, Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Auxiliary Heater To Pipe-4, Pipe-3 To Auxiliary Heater

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X