1990 Cadillac Allante HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 28474

Gates HVAC Heater Hose 28474 - Tee-1 To Tee-2

Position: Tee-1 To Tee-2

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .75
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1990 Cadillac Allante Engines.
Engine Sub Model Notes Fit Notes Position
4.5L V8 Base, Value Leader Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Tee-1 To Tee-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.5L V8	Base, Value Leader	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Tee-1 To Tee-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 19623

1990 Cadillac Allante HVAC Heater Hose ZO 19623

Gates HVAC Heater Hose 19623 - Heater To Tee-2

Position: Heater To Tee-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 17.5
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1990 Cadillac Allante Engines.
Engine Sub Model Notes Fit Notes Position
4.5L V8 Base, Value Leader Molded Heater Hose Fuel Type: GAS Heater To Tee-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.5L V8	Base, Value Leader	Molded Heater Hose	Fuel Type: GAS	Heater To Tee-2

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87000

1990 Cadillac Allante HVAC Heater Hose DY 87000

Dayco HVAC Heater Hose 87000 - Pipe To Tee, Pipe To Throttle Body

Position: Pipe To Tee, Pipe To Throttle Body

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 9 1/4
End 1 Inside Diameter : 3/8
End 2 Inside Diameter : 3/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1990 Cadillac Allante Engines.
Engine Sub Model Notes Position
4.5L V8 Value Leader, Base Small I.D. Heater Hose Pipe To Tee, Pipe To Throttle Body

Engine	Sub Model	Notes	Position
4.5L V8	Value Leader, Base	Small I.D. Heater Hose	Pipe To Tee, Pipe To Throttle Body

Part Interchange

ACDelco	14002S
CARQUEST	18030
Datsun/Nissan	14056-V5022
Datsun/Nissan	14056-19P00
Datsun/Nissan	14056-32F12
Datsun/Nissan	14055-69A06
Datsun/Nissan	14055-96A06
Duralast	B87000
Gates	18030
Goodyear	64309
NAPA	10030
Toyota	16281-42020
Toyota	16284-88381
Toyota	16285-42010
V&W	303000

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18030

1990 Cadillac Allante HVAC Heater Hose ZO 18030

Gates HVAC Heater Hose 18030 - Tee-1 To Pipe-1, Throttle Body To Pipe

Position: Tee-1 To Pipe-1, Throttle Body To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .38
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1990 Cadillac Allante Engines.
Engine Sub Model Notes Fit Notes Position
4.5L V8 Base, Value Leader Cut to fit - Molded Heater Hose Fuel Type: GAS Tee-1 To Pipe-1, Throttle Body To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.5L V8	Base, Value Leader	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Tee-1 To Pipe-1, Throttle Body To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88358

1990 Cadillac Allante HVAC Heater Hose DY 88358

Dayco HVAC Heater Hose 88358 - Heater To Tee-1

Position: Heater To Tee-1

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 16
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1990 Cadillac Allante Engines.
Engine Sub Model Notes Position
4.5L V8 Value Leader, Base Small I.D. Heater Hose Heater To Tee-1

Engine	Sub Model	Notes	Position
4.5L V8	Value Leader, Base	Small I.D. Heater Hose	Heater To Tee-1

Part Interchange

ACDelco	16514M
ACDelco	18118L
CARQUEST	19913
CARQUEST	19611
Datsun/Nissan	92410-JA000
Datsun/Nissan	92410-JA00A
Datsun/Nissan	92410-ZX00A
Duralast	E88358
Gates	19913
Gates	19611
General Motors	1636469
General Motors	14034306
General Motors	1644881
General Motors	19129866
General Motors	1641782
Goodyear	64318
NAPA	11611
NAPA	11913
V&W	304358

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19611

1990 Cadillac Allante HVAC Heater Hose ZO 19611

Gates HVAC Heater Hose 19611 - Heater To Tee-1

Position: Heater To Tee-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20.9
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1990 Cadillac Allante Engines.
Engine Sub Model Notes Fit Notes Position
4.5L V8 Base, Value Leader Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Tee-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.5L V8	Base, Value Leader	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Tee-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 28412

1990 Cadillac Allante HVAC Heater Hose ZO 28412

Gates HVAC Heater Hose 28412 - Tee-1 To Pipe-2, Tee-2 To Pipe-3

Position: Tee-1 To Pipe-2, Tee-2 To Pipe-3

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .75
Working Pressure : 50
Weight Per Length : 13.20 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1990 Cadillac Allante Engines.
Engine Sub Model Notes Fit Notes Position
4.5L V8 Base, Value Leader Cut to Length, 3" - Straight Heater Hose (Standard) Fuel Type: GAS Tee-1 To Pipe-2, Tee-2 To Pipe-3
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.5L V8	Base, Value Leader	Cut to Length, 3" - Straight Heater Hose (Standard)	Fuel Type: GAS	Tee-1 To Pipe-2, Tee-2 To Pipe-3

Part Name: HVAC Heater HoseBrand: GatesPart#: 26242

1990 Cadillac Allante HVAC Heater Hose ZO 26242

Gates HVAC Heater Hose 26242 - Pipe-2 To Water Pump

Position: Pipe-2 To Water Pump

Description:

Straight Heater Hose Silicone

Part Specifications:

Centerline Length : 25
Centerline Length : 7.62
Centerline Length : 300
Inside Diameter 1 : .75
Working Pressure : 50

Features:

Constructed with silicone rubber. Ideal for extremely high temperature service in radiator, heater and other coolant transfer hose applications. Approved for marine applications.
- Reinforced with tough, high temperature resistant polyester textile cords.
- Exceptionally flexible.
- Highly resistant to weathering, coolant deterioration, ozone and temperature extremes.
- Exceeds SAE 20R3 Class A Tube and Cover.
- Can be used for emission hose applications.
- For proper installation, use Gates PowerGrip(R) SB clamps or Gates silicone hose clamps.
- Temperature Rating: 70 Deg. F to +400 Deg. F ( 57 Deg. C to +204 Deg. C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1990 Cadillac Allante Engines.
Engine Sub Model Notes Fit Notes Position
4.5L V8 Base, Value Leader Cut to Length, 4" - Straight Heater Hose (Silicone) Fuel Type: GAS Pipe-2 To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

1990 Cadillac Allante HVAC Heater Hose

Gates HVAC Heater Hose 28474 - Tee-1 To Tee-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19623 - Heater To Tee-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87000 - Pipe To Tee, Pipe To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18030 - Tee-1 To Pipe-1, Throttle Body To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88358 - Heater To Tee-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19611 - Heater To Tee-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Tee-1 To Pipe-2, Tee-2 To Pipe-3

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 26242 - Pipe-2 To Water Pump

Description:

Part Specifications:

Features:

Related HVAC Parts

My Vehicle:

1990 Cadillac Allante HVAC Heater Hose

Gates HVAC Heater Hose 28474 - Tee-1 To Tee-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19623 - Heater To Tee-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87000 - Pipe To Tee, Pipe To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18030 - Tee-1 To Pipe-1, Throttle Body To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88358 - Heater To Tee-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19611 - Heater To Tee-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Tee-1 To Pipe-2, Tee-2 To Pipe-3

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 26242 - Pipe-2 To Water Pump

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X