1996 Cadillac Commercial Chassis HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87000

Dayco HVAC Heater Hose 87000 - Pipe To Throttle Body

Position: Pipe To Throttle Body

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 9 1/4
End 1 Inside Diameter : 3/8
End 2 Inside Diameter : 3/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1996 Cadillac Commercial Chassis Engines.
Engine Sub Model Notes Position
5.7L V8 Base, Brougham Small I.D. Heater Hose Pipe To Throttle Body

Engine	Sub Model	Notes	Position
5.7L V8	Base, Brougham	Small I.D. Heater Hose	Pipe To Throttle Body

Part Interchange

ACDelco	14002S
CARQUEST	18030
Datsun/Nissan	14056-V5022
Datsun/Nissan	14056-19P00
Datsun/Nissan	14056-32F12
Datsun/Nissan	14055-69A06
Datsun/Nissan	14055-96A06
Duralast	B87000
Gates	18030
Goodyear	64309
NAPA	10030
Toyota	16281-42020
Toyota	16284-88381
Toyota	16285-42010
V&W	303000

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19625

1996 Cadillac Commercial Chassis HVAC Heater Hose ZO 19625

Gates HVAC Heater Hose 19625 - Tee To Tank

Position: Tee To Tank

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10.6
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Cadillac Commercial Chassis Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, Brougham Cut to fit - Molded Heater Hose Fuel Type: GAS Tee To Tank
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Base, Brougham	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Tee To Tank

Part Name: HVAC Heater HoseBrand: GatesPart#: 18030

1996 Cadillac Commercial Chassis HVAC Heater Hose ZO 18030

Gates HVAC Heater Hose 18030 - Pipe To Throttle Body

Position: Pipe To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .38
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Cadillac Commercial Chassis Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, Brougham Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Base, Brougham	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 28469

1996 Cadillac Commercial Chassis HVAC Heater Hose ZO 28469

Gates HVAC Heater Hose 28469 - Restrictor To Water Pump, Tee To Water Pump

Position: Restrictor To Water Pump, Tee To Water Pump

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 26
Arm Length 1 : 8
Arm Length 1 : 203.2
Arm Length 2 : 18
Arm Length 2 : 457.2
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1996 Cadillac Commercial Chassis Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, Brougham Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Restrictor To Water Pump, Tee To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Base, Brougham	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Restrictor To Water Pump, Tee To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 19126

1996 Cadillac Commercial Chassis HVAC Heater Hose ZO 19126

Gates HVAC Heater Hose 19126 - Heater To Tee

Position: Heater To Tee

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 28.4
Inside Diameter 1 : .59
Inside Diameter 2 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Cadillac Commercial Chassis Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, Brougham Molded Heater Hose Fuel Type: GAS Heater To Tee
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Base, Brougham	Molded Heater Hose	Fuel Type: GAS	Heater To Tee

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

1996 Cadillac Commercial Chassis HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Engine To Throttle Body

Position: Engine To Throttle Body

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1996 Cadillac Commercial Chassis Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, Brougham Cut to Length, 14" - Straight Heater Hose (Standard) Fuel Type: GAS Engine To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

1996 Cadillac Commercial Chassis HVAC Heater Hose

Dayco HVAC Heater Hose 87000 - Pipe To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19625 - Tee To Tank

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18030 - Pipe To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28469 - Restrictor To Water Pump, Tee To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19126 - Heater To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Engine To Throttle Body

Description:

Part Specifications:

Features:

Related HVAC Parts

My Vehicle:

1996 Cadillac Commercial Chassis HVAC Heater Hose

Dayco HVAC Heater Hose 87000 - Pipe To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19625 - Tee To Tank

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18030 - Pipe To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28469 - Restrictor To Water Pump, Tee To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19126 - Heater To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Engine To Throttle Body

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X