2004 Cadillac CTS HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88441

Dayco HVAC Heater Hose 88441 - Radiator To Valve

Position: Radiator To Valve

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 3/4
End 1 Outside Diameter : 1 3/32
End 2 Inside Diameter : 3/4
End 2 Outside Diameter : 1 3/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2004 Cadillac CTS Engines.
Engine Sub Model Notes Position
3.2L V6 Base w/A.C., w/o Aux. Heater - Small I.D. Heater Hose Radiator To Valve
Part Interchange
ACDelco 16221M
CARQUEST 19760
Duralast D88441
Gates 19760
General Motors 22612945
Goodyear 64151
NAPA 11760
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.2L V6	Base	w/A.C., w/o Aux. Heater - Small I.D. Heater Hose	Radiator To Valve

Part Name: HVAC Heater HoseBrand: GatesPart#: 18718

2004 Cadillac CTS HVAC Heater Hose ZO 18718

Gates HVAC Heater Hose 18718 - Heater To Engine

Position: Heater To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 17.3
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Cadillac CTS Engines.
Engine Sub Model Notes Fit Notes Position
3.2L V6 Base Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.2L V6	Base	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87666

2004 Cadillac CTS HVAC Heater Hose DY 87666

Dayco HVAC Heater Hose 87666 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 9
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2004 Cadillac CTS Engines.
Engine Sub Model Notes Position
5.7L V8 V Small I.D. Heater Hose Heater Outlet
Part Interchange
ACDelco 14111S
ACDelco 14172S
Duralast B87666
Freshstart 63125
Gates 19077
Gates 18805
General Motors 10135301
Goodyear 63125
NAPA 10805
NAPA 11077
V&W 303666
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.7L V8	V	Small I.D. Heater Hose	Heater Outlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87614

2004 Cadillac CTS HVAC Heater Hose DY 87614

Dayco HVAC Heater Hose 87614 - Valve To Tee

Position: Valve To Tee

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2004 Cadillac CTS Engines.
Engine Sub Model Notes Position
3.2L V6 Base Small I.D. Heater Hose Valve To Tee

Engine	Sub Model	Notes	Position
3.2L V6	Base	Small I.D. Heater Hose	Valve To Tee

Part Interchange

ACDelco	18008L
ACDelco	16354M
ACDelco	16276M
CARQUEST	18082
CARQUEST	18450
Duralast	E87614
Ford	F8RZ-18472-HA
Ford	98BB-18K582-HB
Ford	F8RZ-18472-AA
Freshstart	4365
Gates	19343
Gates	23335
Gates	18082
Gates	18450
General Motors	89023413
General Motors	90573890
General Motors	96539582
General Motors	19129959
General Motors	15187987
General Motors	22704431
Goodyear	63102
NAPA	11343
NAPA	10450
NAPA	10082
NAPA	16073
V&W	303614

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19760

2004 Cadillac CTS HVAC Heater Hose ZO 19760

Gates HVAC Heater Hose 19760 - Valve To Radiator

Position: Valve To Radiator

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 16.4
Inside Diameter 1 : .73
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Cadillac CTS Engines.
Engine Sub Model Notes Fit Notes Position
3.2L V6 Base Cut to fit - Molded Heater Hose Fuel Type: GAS Valve To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.2L V6	Base	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Valve To Radiator

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80412

2004 Cadillac CTS HVAC Heater Hose DY 80412

Dayco HVAC Heater Hose 80412 - Coolant Reservoir

Position: Coolant Reservoir

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2004 Cadillac CTS Engines.
Engine Sub Model Notes Position
5.7L V8 V 90? Molded Coolant Hose Coolant Reservoir

Engine	Sub Model	Notes	Position
5.7L V8	V	90? Molded Coolant Hose	Coolant Reservoir

Part Interchange

ACDelco	14495S
ACDelco	14265S
ACDelco	16199M
ACDelco	14371S
Atlas	MH-72
Audi	4F0.121.036
Audi	4F0.121.109E
CARQUEST	28475
CARQUEST	19859
CARQUEST	19803
Chrysler	4596300
Datsun/Nissan	92400-7S510
Datsun/Nissan	92411-4W000
Duralast	D80412
Ford	F5AZ-18472-A
Ford	F5AH-18C266
Ford	F2AH-18C266-AB
Ford	F5RZ-18472-G
Ford	93BB-18K582-HD
Freshstart	4202
Gates	19749
Gates	28475
Gates	19803
Gates	19859
General Motors	10358376
General Motors	88956890
General Motors	21031476
General Motors	10218423
General Motors	25654608
General Motors	21031156
General Motors	14100796
General Motors	15246437
General Motors	22537653
General Motors	1645476
Goodyear	63912
Honda	79725-S0X-A00
NAPA	9816
NAPA	11749
NAPA	11859
NAPA	11803
Saturn	21030772
Saturn	10384033
Saturn	10384055
Saturn	15246436
Saturn	15246437
Suzuki	17856-85Z00

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87630

2004 Cadillac CTS HVAC Heater Hose DY 87630

Dayco HVAC Heater Hose 87630 - Heater To Engine

Position: Heater To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 5
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2004 Cadillac CTS Engines.
Engine Sub Model Notes Position
3.2L V6 Base Small I.D. Heater Hose Heater To Engine
Part Interchange
ACDelco 18032L
CARQUEST 18744
Chrysler 4662175
Duralast E87630
Freshstart 4366
Gates 18744
General Motors 25740130
General Motors 25687367
Goodyear 63103
NAPA 10744
V&W 303630
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.2L V6	Base	Small I.D. Heater Hose	Heater To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19705

2004 Cadillac CTS HVAC Heater Hose ZO 19705

Gates HVAC Heater Hose 19705 - Valve To Pipe-2

Position: Valve To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 11.9
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Cadillac CTS Engines.
Engine Sub Model Notes Fit Notes Position
3.2L V6 Base Molded Heater Hose Fuel Type: GAS Valve To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.2L V6	Base	Molded Heater Hose	Fuel Type: GAS	Valve To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 18710

2004 Cadillac CTS HVAC Heater Hose ZO 18710

Gates HVAC Heater Hose 18710 - Pipe-1 To Radiator

Position: Pipe-1 To Radiator

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.9
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Cadillac CTS Engines.
Engine Sub Model Notes Fit Notes Position
3.2L V6 Base Molded Heater Hose Fuel Type: GAS Pipe-1 To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.2L V6	Base	Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Radiator

Part Name: HVAC Heater HoseBrand: GatesPart#: 18724

2004 Cadillac CTS HVAC Heater Hose ZO 18724

Gates HVAC Heater Hose 18724 - Heater To Auxiliary Water Pump

Position: Heater To Auxiliary Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.6
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Cadillac CTS Engines.
Engine Sub Model Notes Fit Notes Position
3.2L V6 Base Molded Heater Hose Fuel Type: GAS Heater To Auxiliary Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.2L V6	Base	Molded Heater Hose	Fuel Type: GAS	Heater To Auxiliary Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 28475

2004 Cadillac CTS HVAC Heater Hose ZO 28475

Gates HVAC Heater Hose 28475 - Pipe-3 To Reservoir

Position: Pipe-3 To Reservoir

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 16
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 12
Arm Length 2 : 304.8
Inside Diameter 1 : .75
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Cadillac CTS Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 V Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Pipe-3 To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	V	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Pipe-3 To Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 18020

2004 Cadillac CTS HVAC Heater Hose ZO 18020

Gates HVAC Heater Hose 18020 - Tee To Throttle Body

Position: Tee To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2004 Cadillac CTS Engines.
Engine Sub Model Notes Fit Notes Position
3.2L V6 Base Cut to fit - Molded Heater Hose Fuel Type: GAS Tee To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.2L V6	Base	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Tee To Throttle Body

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87838

2004 Cadillac CTS HVAC Heater Hose DY 87838

Dayco HVAC Heater Hose 87838 - Right

Position: Right

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2004 Cadillac CTS Engines.
Engine Sub Model Notes Position
3.6L V6 Base Small I.D. Heater Hose Right
Part Interchange
ACDelco 14442S
CARQUEST 19389
Duralast D87838
Ford 1L5H-18472-GA
Gates 19389
General Motors 88958007
General Motors 25742895
NAPA 11389
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.6L V6	Base	Small I.D. Heater Hose	Right

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

2004 Cadillac CTS HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Reservoir To Tee, Tee To Radiator

Position: Reservoir To Tee, Tee To Radiator

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2004 Cadillac CTS Engines.
Engine Sub Model Notes Fit Notes Position
3.2L V6 Base Cut to Length, 9" - Straight Heater Hose (Standard) Fuel Type: GAS Reservoir To Tee, Tee To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.2L V6	Base	Cut to Length, 9" - Straight Heater Hose (Standard)	Fuel Type: GAS	Reservoir To Tee, Tee To Radiator

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

2004 Cadillac CTS HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Radiator To Tee, Tee To Reservoir, Tee To Throttle Body

Position: Radiator To Tee, Tee To Reservoir, Tee To Throttle Body

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2004 Cadillac CTS Engines.
Engine Sub Model Notes Fit Notes Position
3.6L V6 Base Cut to Length, 35" - Straight Heater Hose (Standard) Fuel Type: GAS Radiator To Tee, Tee To Reservoir, Tee To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.6L V6	Base	Cut to Length, 35" - Straight Heater Hose (Standard)	Fuel Type: GAS	Radiator To Tee, Tee To Reservoir, Tee To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 28412

2004 Cadillac CTS HVAC Heater Hose ZO 28412

Gates HVAC Heater Hose 28412 - Auxiliary Water Pump To Pipe-1, Engine To Pipe-3, Pipe-3 To Reservoir

Position: Auxiliary Water Pump To Pipe-1, Engine To Pipe-3, Pipe-3 To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .75
Working Pressure : 50
Weight Per Length : 13.20 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2004 Cadillac CTS Engines.

Engine	Sub Model	Notes	Fit Notes	Position
3.2L V6	Base	Cut to Length, 15" - Straight Heater Hose (Standard)	Fuel Type: GAS	Auxiliary Water Pump To Pipe-1, Pipe-3 To Reservoir
5.7L V8	V	Cut to Length, 6" - Straight Heater Hose (Standard)	Fuel Type: GAS	Engine To Pipe-3

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	16221M
CARQUEST	19760
Duralast	D88441
Gates	19760
General Motors	22612945
Goodyear	64151
NAPA	11760

ACDelco	14111S
ACDelco	14172S
Duralast	B87666
Freshstart	63125
Gates	19077
Gates	18805
General Motors	10135301
Goodyear	63125
NAPA	10805
NAPA	11077
V&W	303666

ACDelco	18032L
CARQUEST	18744
Chrysler	4662175
Duralast	E87630
Freshstart	4366
Gates	18744
General Motors	25740130
General Motors	25687367
Goodyear	63103
NAPA	10744
V&W	303630

ACDelco	14442S
CARQUEST	19389
Duralast	D87838
Ford	1L5H-18472-GA
Gates	19389
General Motors	88958007
General Motors	25742895
NAPA	11389

My Vehicle:

2004 Cadillac CTS HVAC Heater Hose

Dayco HVAC Heater Hose 88441 - Radiator To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18718 - Heater To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87666 - Heater Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87614 - Valve To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19760 - Valve To Radiator

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80412 - Coolant Reservoir

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87630 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19705 - Valve To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18710 - Pipe-1 To Radiator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18724 - Heater To Auxiliary Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28475 - Pipe-3 To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18020 - Tee To Throttle Body

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87838 - Right

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Reservoir To Tee, Tee To Radiator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Radiator To Tee, Tee To Reservoir, Tee To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Auxiliary Water Pump To Pipe-1, Engine To Pipe-3, Pipe-3 To Reservoir

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X