2007 Cadillac CTS HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87666

Dayco HVAC Heater Hose 87666 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 9
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2007 Cadillac CTS Engines.
Engine Sub Model Notes Position
6.0L V8 V Small I.D. Heater Hose Heater Outlet
Part Interchange
ACDelco 14111S
ACDelco 14172S
Duralast B87666
Freshstart 63125
Gates 19077
Gates 18805
General Motors 10135301
Goodyear 63125
NAPA 10805
NAPA 11077
V&W 303666
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
6.0L V8	V	Small I.D. Heater Hose	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 18903

2007 Cadillac CTS HVAC Heater Hose ZO 18903

Gates HVAC Heater Hose 18903 - Tee-1 To Engine

Position: Tee-1 To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.9
Inside Diameter 1 : .62
Inside Diameter 2 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2007 Cadillac CTS Engines.
Engine Sub Model Notes Fit Notes Position
2.8L V6 Base Molded Heater Hose Fuel Type: GAS Tee-1 To Engine
3.6L V6 Base Molded Heater Hose Fuel Type: GAS Tee-1 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.8L V6	Base	Molded Heater Hose	Fuel Type: GAS	Tee-1 To Engine
3.6L V6	Base	Molded Heater Hose	Fuel Type: GAS	Tee-1 To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80412

2007 Cadillac CTS HVAC Heater Hose DY 80412

Dayco HVAC Heater Hose 80412 - Coolant Reservoir

Position: Coolant Reservoir

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2007 Cadillac CTS Engines.
Engine Sub Model Notes Position
6.0L V8 V 90? Molded Coolant Hose Coolant Reservoir

Engine	Sub Model	Notes	Position
6.0L V8	V	90? Molded Coolant Hose	Coolant Reservoir

Part Interchange

ACDelco	14495S
ACDelco	14265S
ACDelco	16199M
ACDelco	14371S
Atlas	MH-72
Audi	4F0.121.036
Audi	4F0.121.109E
CARQUEST	28475
CARQUEST	19859
CARQUEST	19803
Chrysler	4596300
Datsun/Nissan	92400-7S510
Datsun/Nissan	92411-4W000
Duralast	D80412
Ford	F5AZ-18472-A
Ford	F5AH-18C266
Ford	F2AH-18C266-AB
Ford	F5RZ-18472-G
Ford	93BB-18K582-HD
Freshstart	4202
Gates	19749
Gates	28475
Gates	19803
Gates	19859
General Motors	10358376
General Motors	88956890
General Motors	21031476
General Motors	10218423
General Motors	25654608
General Motors	21031156
General Motors	14100796
General Motors	15246437
General Motors	22537653
General Motors	1645476
Goodyear	63912
Honda	79725-S0X-A00
NAPA	9816
NAPA	11749
NAPA	11859
NAPA	11803
Saturn	21030772
Saturn	10384033
Saturn	10384055
Saturn	15246436
Saturn	15246437
Suzuki	17856-85Z00

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28475

2007 Cadillac CTS HVAC Heater Hose ZO 28475

Gates HVAC Heater Hose 28475 - Pipe-2 To Reservoir

Position: Pipe-2 To Reservoir

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 16
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 12
Arm Length 2 : 304.8
Inside Diameter 1 : .75
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments
This Part Fits Following 2007 Cadillac CTS Engines.
Engine Sub Model Notes Fit Notes Position
6.0L V8 V 90º Molded Heater Hose Fuel Type: GAS Pipe-2 To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.0L V8	V	90º Molded Heater Hose	Fuel Type: GAS	Pipe-2 To Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 20662

2007 Cadillac CTS HVAC Heater Hose ZO 20662

Gates HVAC Heater Hose 20662 - Heater To Tee-1

Position: Heater To Tee-1

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 5.2
Inside Diameter 1 : .61
Inside Diameter 2 : .75
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2007 Cadillac CTS Engines.
Engine Sub Model Notes Fit Notes Position
2.8L V6 Base Molded Coolant Hose Fuel Type: GAS Heater To Tee-1
3.6L V6 Base Molded Coolant Hose Fuel Type: GAS Heater To Tee-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.8L V6	Base	Molded Coolant Hose	Fuel Type: GAS	Heater To Tee-1
3.6L V6	Base	Molded Coolant Hose	Fuel Type: GAS	Heater To Tee-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19821

2007 Cadillac CTS HVAC Heater Hose ZO 19821

Gates HVAC Heater Hose 19821 - Tee-1 To Reservoir

Position: Tee-1 To Reservoir

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 14
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2007 Cadillac CTS Engines.
Engine Sub Model Notes Fit Notes Position
2.8L V6 Base Molded Heater Hose Fuel Type: GAS Tee-1 To Reservoir
3.6L V6 Base Molded Heater Hose Fuel Type: GAS Tee-1 To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.8L V6	Base	Molded Heater Hose	Fuel Type: GAS	Tee-1 To Reservoir
3.6L V6	Base	Molded Heater Hose	Fuel Type: GAS	Tee-1 To Reservoir

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87838

2007 Cadillac CTS HVAC Heater Hose DY 87838

Dayco HVAC Heater Hose 87838 - Right

Position: Right

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2007 Cadillac CTS Engines.
Engine Sub Model Notes Position
2.8L V6 Base Small I.D. Heater Hose Right
3.6L V6 Base Small I.D. Heater Hose Right
Part Interchange
ACDelco 14442S
CARQUEST 19389
Duralast D87838
Ford 1L5H-18472-GA
Gates 19389
General Motors 88958007
General Motors 25742895
NAPA 11389
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.8L V6	Base	Small I.D. Heater Hose	Right
3.6L V6	Base	Small I.D. Heater Hose	Right

Part Name: HVAC Heater HoseBrand: GatesPart#: 28412

2007 Cadillac CTS HVAC Heater Hose ZO 28412

Gates HVAC Heater Hose 28412 - Tee-1 To Pipe-2

Position: Tee-1 To Pipe-2

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .75
Working Pressure : 50
Weight Per Length : 13.20 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2007 Cadillac CTS Engines.
Engine Sub Model Notes Fit Notes Position
6.0L V8 V Cut to Length, 6" - Straight Heater Hose (Standard) Fuel Type: GAS Tee-1 To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.0L V8	V	Cut to Length, 6" - Straight Heater Hose (Standard)	Fuel Type: GAS	Tee-1 To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 24527

2007 Cadillac CTS HVAC Heater Hose ZO 24527

Gates HVAC Heater Hose 24527 - Radiator To Tee-2, Tee-2 To Reservoir, Tee-2 To Throttle Body

Position: Radiator To Tee-2, Tee-2 To Reservoir, Tee-2 To Throttle Body

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 109.5
Number of Branches : 1
Inside Diameter 1 : .31
Inside Diameter 2 : .31
Inside Diameter 3 : .31
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2007 Cadillac CTS Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.8L V6	Base	Molded Coolant Hose	Fuel Type: GAS	Radiator To Tee-2, Tee-2 To Reservoir, Tee-2 To Throttle Body
3.6L V6	Base	Molded Coolant Hose	Fuel Type: GAS	Radiator To Tee-2, Tee-2 To Reservoir, Tee-2 To Throttle Body

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2007 Cadillac CTS HVAC Heater Hose

Dayco HVAC Heater Hose 87666 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18903 - Tee-1 To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80412 - Coolant Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28475 - Pipe-2 To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 20662 - Heater To Tee-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19821 - Tee-1 To Reservoir

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87838 - Right

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Tee-1 To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24527 - Radiator To Tee-2, Tee-2 To Reservoir, Tee-2 To Throttle Body

Description:

Part Specifications:

Features:

Related HVAC Parts

ACDelco	14111S
ACDelco	14172S
Duralast	B87666
Freshstart	63125
Gates	19077
Gates	18805
General Motors	10135301
Goodyear	63125
NAPA	10805
NAPA	11077
V&W	303666

ACDelco	14442S
CARQUEST	19389
Duralast	D87838
Ford	1L5H-18472-GA
Gates	19389
General Motors	88958007
General Motors	25742895
NAPA	11389

My Vehicle:

2007 Cadillac CTS HVAC Heater Hose

Dayco HVAC Heater Hose 87666 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18903 - Tee-1 To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80412 - Coolant Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28475 - Pipe-2 To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 20662 - Heater To Tee-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19821 - Tee-1 To Reservoir

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87838 - Right

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Tee-1 To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24527 - Radiator To Tee-2, Tee-2 To Reservoir, Tee-2 To Throttle Body

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X