2002 Cadillac Eldorado HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18207

Gates HVAC Heater Hose 18207 - Throttle Body To Pipe-3

Position: Throttle Body To Pipe-3

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.8
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 Cadillac Eldorado Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 ESC, ETC Molded Heater Hose Fuel Type: GAS Throttle Body To Pipe-3
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	ESC, ETC	Molded Heater Hose	Fuel Type: GAS	Throttle Body To Pipe-3

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86110

2002 Cadillac Eldorado HVAC Heater Hose DY 86110

Dayco HVAC Heater Hose 86110 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 13
End 1 Inside Diameter : 23/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2002 Cadillac Eldorado Engines.
Engine Sub Model Notes Position
4.6L V8 ESC, ETC Small I.D. Heater Hose Heater To Pipe-2

Engine	Sub Model	Notes	Position
4.6L V8	ESC, ETC	Small I.D. Heater Hose	Heater To Pipe-2

Part Interchange

ACDelco	16348M
ACDelco	16284M
CARQUEST	19734
CARQUEST	19826
Duralast	D86110
Gates	19734
Gates	19826
General Motors	3544758
General Motors	25679317
General Motors	3528979
General Motors	22685156
Honda	79725-S2A-A00
NAPA	11826
NAPA	11734
Saturn	22685551

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86096

2002 Cadillac Eldorado HVAC Heater Hose DY 86096

Dayco HVAC Heater Hose 86096 - Pipe To Reservoir

Position: Pipe To Reservoir

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 10
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2002 Cadillac Eldorado Engines.
Engine Sub Model Notes Position
4.6L V8 ETC, ESC Small I.D. Heater Hose Pipe To Reservoir

Engine	Sub Model	Notes	Position
4.6L V8	ETC, ESC	Small I.D. Heater Hose	Pipe To Reservoir

Part Interchange

ACDelco	14174S
ACDelco	16186M
CARQUEST	19708
Chrysler	4767170AB
Chrysler	4596233
Chrysler	4621967
Duralast	D86096
Freshstart	4463
Gates	19603
Gates	19708
General Motors	22657321
General Motors	25684104
Goodyear	63190
NAPA	11708
NAPA	11603

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86109

2002 Cadillac Eldorado HVAC Heater Hose DY 86109

Dayco HVAC Heater Hose 86109 - Pipe-1 To Heater

Position: Pipe-1 To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 23/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2002 Cadillac Eldorado Engines.
Engine Sub Model Notes Position
4.6L V8 ESC, ETC Small I.D. Heater Hose Pipe-1 To Heater

Engine	Sub Model	Notes	Position
4.6L V8	ESC, ETC	Small I.D. Heater Hose	Pipe-1 To Heater

Part Interchange

ACDelco	16219M
ACDelco	14516S
ACDelco	14480S
CARQUEST	19733
Datsun/Nissan	92400-EA200
Duralast	D86109
Gates	19878
Gates	19733
Gates	19850
General Motors	25679318
General Motors	3528978
General Motors	3543620
General Motors	3544757
General Motors	15776163
General Motors	22685157
General Motors	22682498
General Motors	15776161
NAPA	11850
NAPA	11878
NAPA	11733
Saturn	22615850

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19734

2002 Cadillac Eldorado HVAC Heater Hose ZO 19734

Gates HVAC Heater Hose 19734 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 18.3
Inside Diameter 1 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 Cadillac Eldorado Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 ESC, ETC Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	ESC, ETC	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19733

2002 Cadillac Eldorado HVAC Heater Hose ZO 19733

Gates HVAC Heater Hose 19733 - Pipe-4 To Heater

Position: Pipe-4 To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.1
Inside Diameter 1 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 Cadillac Eldorado Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 ESC, ETC Molded Heater Hose Fuel Type: GAS Pipe-4 To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	ESC, ETC	Molded Heater Hose	Fuel Type: GAS	Pipe-4 To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

2002 Cadillac Eldorado HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Pipe-3 To Reservoir, Radiator To Reservoir

Position: Pipe-3 To Reservoir, Radiator To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2002 Cadillac Eldorado Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 ESC, ETC Cut to Length, 17" - Straight Heater Hose (Standard) Fuel Type: GAS Pipe-3 To Reservoir, Radiator To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	ESC, ETC	Cut to Length, 17" - Straight Heater Hose (Standard)	Fuel Type: GAS	Pipe-3 To Reservoir, Radiator To Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 28412

2002 Cadillac Eldorado HVAC Heater Hose ZO 28412

Gates HVAC Heater Hose 28412 - Engine To Pipe-4, Pipe-1 To Pipe-2, Pipe-2 To Water Pump, Tee To Reservoir

Position: Engine To Pipe-4, Pipe-1 To Pipe-2, Pipe-2 To Water Pump, Tee To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .75
Working Pressure : 50
Weight Per Length : 13.20 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2002 Cadillac Eldorado Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 ESC, ETC Cut to Length, 8" - Straight Heater Hose (Standard) Fuel Type: GAS Engine To Pipe-4, Pipe-1 To Pipe-2, Pipe-2 To Water Pump, Tee To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2002 Cadillac Eldorado HVAC Heater Hose

Gates HVAC Heater Hose 18207 - Throttle Body To Pipe-3

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86110 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86096 - Pipe To Reservoir

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86109 - Pipe-1 To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19734 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19733 - Pipe-4 To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Pipe-3 To Reservoir, Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Engine To Pipe-4, Pipe-1 To Pipe-2, Pipe-2 To Water Pump, Tee To Reservoir

Description:

Part Specifications:

Features:

Related HVAC Parts

My Vehicle:

2002 Cadillac Eldorado HVAC Heater Hose

Gates HVAC Heater Hose 18207 - Throttle Body To Pipe-3

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86110 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86096 - Pipe To Reservoir

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86109 - Pipe-1 To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19734 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19733 - Pipe-4 To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Pipe-3 To Reservoir, Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Engine To Pipe-4, Pipe-1 To Pipe-2, Pipe-2 To Water Pump, Tee To Reservoir

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X