1997 Cadillac Seville HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86825

Dayco HVAC Heater Hose 86825 - Throttle Body To Pipe

Position: Throttle Body To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 5
End 1 Inside Diameter : 23/64
End 1 Outside Diameter : 5/8
End 2 Inside Diameter : 23/64
End 2 Outside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1997 Cadillac Seville Engines.
Engine Sub Model Notes Position
4.6L V8 SLS, STS Small I.D. Heater Hose Throttle Body To Pipe
Part Interchange
ACDelco 14310S
ACDelco 14309S
CARQUEST 18250
CARQUEST 18249
Duralast B86825
Gates 18249
Gates 18250
General Motors 3538504
General Motors 3537362
Goodyear 64178
NAPA 10250
NAPA 10249
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.6L V8	SLS, STS	Small I.D. Heater Hose	Throttle Body To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 18250

1997 Cadillac Seville HVAC Heater Hose ZO 18250

Gates HVAC Heater Hose 18250 - Throttle Body To Pipe-4

Position: Throttle Body To Pipe-4

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.8
Inside Diameter 1 : .34
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1997 Cadillac Seville Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 SLS, STS Molded Heater Hose Fuel Type: GAS Throttle Body To Pipe-4
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	SLS, STS	Molded Heater Hose	Fuel Type: GAS	Throttle Body To Pipe-4

Part Name: HVAC Heater HoseBrand: GatesPart#: 18249

1997 Cadillac Seville HVAC Heater Hose ZO 18249

Gates HVAC Heater Hose 18249 - Pipe-3 To Throttle Body

Position: Pipe-3 To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.1
Inside Diameter 1 : .34
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1997 Cadillac Seville Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 SLS, STS Molded Heater Hose Fuel Type: GAS Pipe-3 To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	SLS, STS	Molded Heater Hose	Fuel Type: GAS	Pipe-3 To Throttle Body

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86110

1997 Cadillac Seville HVAC Heater Hose DY 86110

Dayco HVAC Heater Hose 86110 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 13
End 1 Inside Diameter : 23/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 1997 Cadillac Seville Engines.
Engine Sub Model Notes Position
4.6L V8 SLS, STS Heater End - Small I.D. Heater Hose Heater Outlet

Engine	Sub Model	Notes	Position
4.6L V8	SLS, STS	Heater End - Small I.D. Heater Hose	Heater Outlet

Part Interchange

ACDelco	16348M
ACDelco	16284M
CARQUEST	19734
CARQUEST	19826
Duralast	D86110
Gates	19734
Gates	19826
General Motors	3544758
General Motors	25679317
General Motors	3528979
General Motors	22685156
Honda	79725-S2A-A00
NAPA	11826
NAPA	11734
Saturn	22685551

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86109

1997 Cadillac Seville HVAC Heater Hose DY 86109

Dayco HVAC Heater Hose 86109 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 23/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1997 Cadillac Seville Engines.
Engine Sub Model Notes Position
4.6L V8 SLS, STS Small I.D. Heater Hose Heater Inlet

Engine	Sub Model	Notes	Position
4.6L V8	SLS, STS	Small I.D. Heater Hose	Heater Inlet

Part Interchange

ACDelco	16219M
ACDelco	14516S
ACDelco	14480S
CARQUEST	19733
Datsun/Nissan	92400-EA200
Duralast	D86109
Gates	19878
Gates	19733
Gates	19850
General Motors	25679318
General Motors	3528978
General Motors	3543620
General Motors	3544757
General Motors	15776163
General Motors	22685157
General Motors	22682498
General Motors	15776161
NAPA	11850
NAPA	11878
NAPA	11733
Saturn	22615850

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19734

1997 Cadillac Seville HVAC Heater Hose ZO 19734

Gates HVAC Heater Hose 19734 - Heater To Tee

Position: Heater To Tee

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 18.3
Inside Diameter 1 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1997 Cadillac Seville Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 SLS, STS Molded Heater Hose Fuel Type: GAS Heater To Tee
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	SLS, STS	Molded Heater Hose	Fuel Type: GAS	Heater To Tee

Part Name: HVAC Heater HoseBrand: GatesPart#: 19733

1997 Cadillac Seville HVAC Heater Hose ZO 19733

Gates HVAC Heater Hose 19733 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.1
Inside Diameter 1 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1997 Cadillac Seville Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 SLS, STS Molded Heater Hose Fuel Type: GAS Heater To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	SLS, STS	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 28412

1997 Cadillac Seville HVAC Heater Hose ZO 28412

Gates HVAC Heater Hose 28412 - Pipe-1 To Engine, Tee To Reservoir

Position: Pipe-1 To Engine, Tee To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .75
Working Pressure : 50
Weight Per Length : 13.20 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1997 Cadillac Seville Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 SLS, STS Cut to Length, 22" - Straight Heater Hose (Standard) Fuel Type: GAS Pipe-1 To Engine, Tee To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	SLS, STS	Cut to Length, 22" - Straight Heater Hose (Standard)	Fuel Type: GAS	Pipe-1 To Engine, Tee To Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 26242

1997 Cadillac Seville HVAC Heater Hose ZO 26242

Gates HVAC Heater Hose 26242 - Pipe-2 To Engine, Tee To Pipe-1

Position: Pipe-2 To Engine, Tee To Pipe-1

Description:

Straight Heater Hose Silicone

Part Specifications:

Centerline Length : 25
Centerline Length : 7.62
Centerline Length : 300
Inside Diameter 1 : .75
Working Pressure : 50

Features:

Constructed with silicone rubber. Ideal for extremely high temperature service in radiator, heater and other coolant transfer hose applications. Approved for marine applications.
- Reinforced with tough, high temperature resistant polyester textile cords.
- Exceptionally flexible.
- Highly resistant to weathering, coolant deterioration, ozone and temperature extremes.
- Exceeds SAE 20R3 Class A Tube and Cover.
- Can be used for emission hose applications.
- For proper installation, use Gates PowerGrip(R) SB clamps or Gates silicone hose clamps.
- Temperature Rating: 70 Deg. F to +400 Deg. F ( 57 Deg. C to +204 Deg. C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1997 Cadillac Seville Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 SLS, STS Cut to Length, 3" - Straight Heater Hose (Silicone) Fuel Type: GAS Pipe-2 To Engine, Tee To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

1997 Cadillac Seville HVAC Heater Hose

Dayco HVAC Heater Hose 86825 - Throttle Body To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18250 - Throttle Body To Pipe-4

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18249 - Pipe-3 To Throttle Body

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86110 - Heater Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86109 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19734 - Heater To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19733 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Pipe-1 To Engine, Tee To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 26242 - Pipe-2 To Engine, Tee To Pipe-1

Description:

Part Specifications:

Features:

Related HVAC Parts

ACDelco	14310S
ACDelco	14309S
CARQUEST	18250
CARQUEST	18249
Duralast	B86825
Gates	18249
Gates	18250
General Motors	3538504
General Motors	3537362
Goodyear	64178
NAPA	10250
NAPA	10249

My Vehicle:

1997 Cadillac Seville HVAC Heater Hose

Dayco HVAC Heater Hose 86825 - Throttle Body To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18250 - Throttle Body To Pipe-4

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18249 - Pipe-3 To Throttle Body

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86110 - Heater Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86109 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19734 - Heater To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19733 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Pipe-1 To Engine, Tee To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 26242 - Pipe-2 To Engine, Tee To Pipe-1

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X