2003 Chevrolet Astro HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18801

Gates HVAC Heater Hose 18801 - Valve To Auxiliary Heater Pipe-3

Position: Valve To Auxiliary Heater Pipe-3

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.5
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Chevrolet Astro Engines.
Engine Sub Model Notes Fit Notes Position
4.3L V6 Base, LS, LT W/Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Valve To Auxiliary Heater Pipe-3
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base, LS, LT	W/Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Valve To Auxiliary Heater Pipe-3

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80400

2003 Chevrolet Astro HVAC Heater Hose DY 80400

Dayco HVAC Heater Hose 80400 - Valve To Pipe

Position: Valve To Pipe

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2003 Chevrolet Astro Engines.
Engine Sub Model Notes Position
4.3L V6 LS, LT, Base Cut to Fit - 90? Molded Coolant Hose Valve To Pipe

Engine	Sub Model	Notes	Position
4.3L V6	LS, LT, Base	Cut to Fit - 90? Molded Coolant Hose	Valve To Pipe

Part Interchange

ACDelco	14228S
ACDelco	14160S
ACDelco	14229S
ACDelco	14237S
ACDelco	20227S
ACDelco	14405S
ACDelco	14148S
ACDelco	14243S
Atlas	MH-60
CARQUEST	19005
CARQUEST	19333
CARQUEST	28466
CARQUEST	21738
CARQUEST	19035
CARQUEST	21862
CARQUEST	21739
CARQUEST	21742
Chrysler	3918266
Chrysler	3918200
Chrysler	39182000
Datsun/Nissan	14056-88G05
Datsun/Nissan	21306-16A00
Datsun/Nissan	14055-57Y11
Datsun/Nissan	14056-77A01
Duralast	B80400
Ford	F1DE-8A506-AA
Ford	D4AZ-18472-G
Ford	E6AE-8A527-AA
Ford	F1DE-8A527-AA
Ford	E6DZ-8A506-A
Ford	E6DZ-8A527-A
Ford	E9SE-8597-B
Ford	E8SZ-8597-B
Ford	E6AE-8A506-AA
Ford	F40Y-18472-A
Ford	F5RZ-8290-A
Ford	E6AE-8A506-BB
Ford	F6DH-18D334-AD
Ford	F6DZ-18472-AB
Ford	F6DH-18D334-AB
Freshstart	4318
Freshstart	4101
Gates	28466
Gates	21739
Gates	21742
Gates	21862
Gates	21738
Gates	19005
Gates	19333
Gates	19645
Gates	19035
General Motors	10215999
General Motors	10197652
General Motors	10171104
General Motors	10284263
General Motors	55036950
General Motors	15708635
General Motors	15713591
General Motors	15553626
General Motors	12603761
General Motors	35232953
General Motors	12590013
General Motors	3523265
General Motors	10021318
General Motors	10145098
General Motors	10135305
General Motors	10038502
General Motors	21030565
General Motors	15984157
General Motors	22685822
General Motors	25662102
General Motors	10145118
General Motors	30013103
General Motors	25525213
General Motors	22704430
General Motors	22704428
Goodyear	63052
Goodyear	63806
Honda	79118-S3V-A00
Honda	19508-P72-000
Honda	19504-PEO-010
Honda	19504-PE0-010
Honda	79118-S3V-A01
Honda	79117-S3V-A00
Honda	79722-SD5-A00
Honda	19508-PE0-010
Isuzu	8-94384-326-3
Isuzu	8-94384-326-2
Kia	K01315421
Lazorlite	L34-8589
Mazda	KJ01-15-261
Motorcraft	KM1809
Motorcraft	KM1748
NAPA	11035
NAPA	9807
NAPA	11333
NAPA	11005
Pirelli	43806
Toyota	16261-74010
Toyota	16261-74030
Toyota	16264-74030
Toyota	87245-3D520
Volvo Cars	3M5H-18K580-AB

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88477

2003 Chevrolet Astro HVAC Heater Hose DY 88477

Dayco HVAC Heater Hose 88477 - Valve To Intake Manifold

Position: Valve To Intake Manifold

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 20
End 1 Inside Diameter : 3/4
End 1 Outside Diameter : 1 3/32
End 2 Inside Diameter : 3/4
End 2 Outside Diameter : 1 3/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2003 Chevrolet Astro Engines.
Engine Sub Model Notes Position
4.3L V6 Base, LS, LT Cut to Fit - Top Hose - Small I.D. Heater Hose Valve To Intake Manifold
Part Interchange
ACDelco 18414L
ACDelco 16223M
CARQUEST 19901
CARQUEST 19762
Datsun/Nissan 92400-7Y000
Duralast E88477
Gates 19901
Gates 19762
General Motors 15729510
NAPA 11901
NAPA 11762
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.3L V6	Base, LS, LT	Cut to Fit - Top Hose - Small I.D. Heater Hose	Valve To Intake Manifold

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

2003 Chevrolet Astro HVAC Heater Hose ZO 28466

Gates HVAC Heater Hose 28466 - Pipe To Water Pump, Valve To Pipe

Position: Pipe To Water Pump, Valve To Pipe

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2003 Chevrolet Astro Engines.
Engine Sub Model Notes Fit Notes Position
4.3L V6 Base, LS, LT Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Pipe To Water Pump, Valve To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base, LS, LT	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Pipe To Water Pump, Valve To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19762

2003 Chevrolet Astro HVAC Heater Hose ZO 19762

Gates HVAC Heater Hose 19762 - Valve To Intake Manifold (Upper)

Position: Valve To Intake Manifold (Upper)

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 26.5
Inside Diameter 1 : .74
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Chevrolet Astro Engines.
Engine Sub Model Notes Fit Notes Position
4.3L V6 Base, LS, LT Molded Heater Hose Fuel Type: GAS Valve To Intake Manifold (Upper)
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base, LS, LT	Molded Heater Hose	Fuel Type: GAS	Valve To Intake Manifold (Upper)

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87979

2003 Chevrolet Astro HVAC Heater Hose DY 87979

Dayco HVAC Heater Hose 87979 - Heater To Valve

Position: Heater To Valve

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 21 1/2
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 31/32
End 2 Inside Diameter : 5/8
End 2 Outside Diameter : 31/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2003 Chevrolet Astro Engines.
Engine Sub Model Notes Position
4.3L V6 Base, LS, LT Top Hose - Small I.D. Heater Hose Heater To Valve
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.3L V6	Base, LS, LT	Top Hose - Small I.D. Heater Hose	Heater To Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88497

2003 Chevrolet Astro HVAC Heater Hose DY 88497

Dayco HVAC Heater Hose 88497 - Heater To Valve

Position: Heater To Valve

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 19
End 1 Inside Diameter : 3/4
End 1 Outside Diameter : 1 3/32
End 2 Inside Diameter : 3/4
End 2 Outside Diameter : 1 3/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2003 Chevrolet Astro Engines.
Engine Sub Model Notes Position
4.3L V6 Base, LS, LT Bottom Hose - Small I.D. Heater Hose Heater To Valve
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.3L V6	Base, LS, LT	Bottom Hose - Small I.D. Heater Hose	Heater To Valve

Part Name: HVAC Heater HoseBrand: GatesPart#: 19198

2003 Chevrolet Astro HVAC Heater Hose ZO 19198

Gates HVAC Heater Hose 19198 - Heater To Valve (Upper)

Position: Heater To Valve (Upper)

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 34.4
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Chevrolet Astro Engines.
Engine Sub Model Notes Fit Notes Position
4.3L V6 Base, LS, LT Molded Heater Hose Fuel Type: GAS Heater To Valve (Upper)
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base, LS, LT	Molded Heater Hose	Fuel Type: GAS	Heater To Valve (Upper)

Part Name: HVAC Heater HoseBrand: GatesPart#: 19761

2003 Chevrolet Astro HVAC Heater Hose ZO 19761

Gates HVAC Heater Hose 19761 - Heater To Valve (Lower)

Position: Heater To Valve (Lower)

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 30.7
Inside Diameter 1 : .74
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Chevrolet Astro Engines.
Engine Sub Model Notes Fit Notes Position
4.3L V6 Base, LS, LT Molded Heater Hose Fuel Type: GAS Heater To Valve (Lower)
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base, LS, LT	Molded Heater Hose	Fuel Type: GAS	Heater To Valve (Lower)

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

2003 Chevrolet Astro HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Position: Radiator To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2003 Chevrolet Astro Engines.
Engine Sub Model Notes Fit Notes Position
4.3L V6 Base, LS, LT Cut to Length, 16" - Straight Heater Hose (Standard) Fuel Type: GAS Radiator To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base, LS, LT	Cut to Length, 16" - Straight Heater Hose (Standard)	Fuel Type: GAS	Radiator To Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2003 Chevrolet Astro HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Auxiliary Heater Pipe-2 To Valve, Tee To Auxiliary Heater Pipe-1

Position: Auxiliary Heater Pipe-2 To Valve, Tee To Auxiliary Heater Pipe-1

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2003 Chevrolet Astro Engines.
Engine Sub Model Notes Fit Notes Position
4.3L V6 Base, LS, LT W/Aux. Heater; Cut to Length, 8" - Straight Heater Hose (Standard) Fuel Type: GAS Auxiliary Heater Pipe-2 To Valve, Tee To Auxiliary Heater Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	18414L
ACDelco	16223M
CARQUEST	19901
CARQUEST	19762
Datsun/Nissan	92400-7Y000
Duralast	E88477
Gates	19901
Gates	19762
General Motors	15729510
NAPA	11901
NAPA	11762

My Vehicle:

2003 Chevrolet Astro HVAC Heater Hose

Gates HVAC Heater Hose 18801 - Valve To Auxiliary Heater Pipe-3

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80400 - Valve To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88477 - Valve To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28466 - Pipe To Water Pump, Valve To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19762 - Valve To Intake Manifold (Upper)

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87979 - Heater To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88497 - Heater To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19198 - Heater To Valve (Upper)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19761 - Heater To Valve (Lower)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Auxiliary Heater Pipe-2 To Valve, Tee To Auxiliary Heater Pipe-1

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X