2010 Chevrolet Cobalt HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18194

Gates HVAC Heater Hose 18194 - Thermostat To Reservoir

Position: Thermostat To Reservoir

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.8
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2010 Chevrolet Cobalt Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 Base, LS, LT, LT Team Canada Molded Heater Hose Fuel Type: GAS Thermostat To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	Base, LS, LT, LT Team Canada	Molded Heater Hose	Fuel Type: GAS	Thermostat To Reservoir

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87604

2010 Chevrolet Cobalt HVAC Heater Hose DY 87604

Dayco HVAC Heater Hose 87604 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 13
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2010 Chevrolet Cobalt Engines.
Engine Sub Model Notes Position
2.0L L4 SS Cut to Fit - Small I.D. Heater Hose Heater Outlet

Engine	Sub Model	Notes	Position
2.0L L4	SS	Cut to Fit - Small I.D. Heater Hose	Heater Outlet

Part Interchange

ACDelco	16004M
CARQUEST	18071
Duralast	D87604
Ford	F5VH-18C266-AA
Ford	YF1Z-18472-AA
Ford	3W7H-18K580-BA
Ford	XF1H-18K579-AA
Ford	F1OY-18472-C
Ford	F1OY-18472-D
Freshstart	4332
Gates	18071
General Motors	25856148
General Motors	10288179
General Motors	15776141
General Motors	22682485
General Motors	22709849
Goodyear	63068
NAPA	10071
Toyota	87245-50360
V&W	303604

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88427

2010 Chevrolet Cobalt HVAC Heater Hose DY 88427

Dayco HVAC Heater Hose 88427 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8
End 1 Inside Diameter : 23/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2010 Chevrolet Cobalt Engines.
Engine Sub Model Notes Position
2.2L L4 Base, LS, LT, LT Team Canada Cut to Fit - Small I.D. Heater Hose Heater Inlet

Engine	Sub Model	Notes	Position
2.2L L4	Base, LS, LT, LT Team Canada	Cut to Fit - Small I.D. Heater Hose	Heater Inlet

Part Interchange

ACDelco	14476S
ACDelco	14463S
ACDelco	14397S
CARQUEST	19848
Duralast	B88427
Gates	19824
Gates	19848
Gates	19840
General Motors	22730982
General Motors	22682483
General Motors	22715318
General Motors	15247538
General Motors	10378597
General Motors	10378598
NAPA	11824
NAPA	11840
NAPA	11848

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19824

2010 Chevrolet Cobalt HVAC Heater Hose ZO 19824

Gates HVAC Heater Hose 19824 - Engine To Heater

Position: Engine To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 16.7
Inside Diameter 1 : .73
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2010 Chevrolet Cobalt Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 Base, LS, LT, LT Team Canada Molded Heater Hose Fuel Type: GAS Engine To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	Base, LS, LT, LT Team Canada	Molded Heater Hose	Fuel Type: GAS	Engine To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 18259

2010 Chevrolet Cobalt HVAC Heater Hose ZO 18259

Gates HVAC Heater Hose 18259 - Pipe To Engine, Pipe-1 To Engine

Position: Pipe To Engine, Pipe-1 To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.8
Inside Diameter 1 : .3
Inside Diameter 2 : .41
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2010 Chevrolet Cobalt Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	SS	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe To Engine
2.2L L4	Base, LS, LT, LT Team Canada	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Engine

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88426

2010 Chevrolet Cobalt HVAC Heater Hose DY 88426

Dayco HVAC Heater Hose 88426 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 13
End 1 Inside Diameter : 23/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : N
Contains Heat Shield : Y
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2010 Chevrolet Cobalt Engines.
Engine Sub Model Notes Position
2.0L L4 SS Small I.D. Heater Hose Heater Inlet
Part Interchange
ACDelco 14392S
CARQUEST 19815
Duralast D88426
Gates 19815
General Motors 10314360
General Motors 22680499
Goodyear 64297
NAPA 11815
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	SS	Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19316

2010 Chevrolet Cobalt HVAC Heater Hose ZO 19316

Gates HVAC Heater Hose 19316 - Heater To Thermostat

Position: Heater To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 11.6
Inside Diameter 1 : .61
Inside Diameter 2 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2010 Chevrolet Cobalt Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 SS Molded Heater Hose Fuel Type: GAS Heater To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	SS	Molded Heater Hose	Fuel Type: GAS	Heater To Thermostat

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87904

2010 Chevrolet Cobalt HVAC Heater Hose DY 87904

Dayco HVAC Heater Hose 87904 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 9.0
End 1 Inside Diameter : 19/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2010 Chevrolet Cobalt Engines.
Engine Sub Model Notes Position
2.2L L4 Base, LS, LT, LT Team Canada Small I.D. Heater Hose Heater Outlet
Part Interchange
ACDelco 14475S
ACDelco 14496S
CARQUEST 19500
Duralast B87904
Gates 19478
Gates 19500
General Motors 22717583
General Motors 15270255
NAPA 11500
NAPA 11478
Suzuki 17872-78J00
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.2L L4	Base, LS, LT, LT Team Canada	Small I.D. Heater Hose	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19658

2010 Chevrolet Cobalt HVAC Heater Hose ZO 19658

Gates HVAC Heater Hose 19658 - Tee-2 To Engine

Position: Tee-2 To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6.8
Inside Diameter 1 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2010 Chevrolet Cobalt Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 SS Molded Heater Hose Fuel Type: GAS Tee-2 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	SS	Molded Heater Hose	Fuel Type: GAS	Tee-2 To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19500

2010 Chevrolet Cobalt HVAC Heater Hose ZO 19500

Gates HVAC Heater Hose 19500 - Heater To Thermostat

Position: Heater To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.9
Inside Diameter 1 : .61
Inside Diameter 2 : .74
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2010 Chevrolet Cobalt Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 Base, LS, LT, LT Team Canada Molded Heater Hose Fuel Type: GAS Heater To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	Base, LS, LT, LT Team Canada	Molded Heater Hose	Fuel Type: GAS	Heater To Thermostat

Part Name: HVAC Heater HoseBrand: GatesPart#: 19815

2010 Chevrolet Cobalt HVAC Heater Hose ZO 19815

Gates HVAC Heater Hose 19815 - Engine To Heater

Position: Engine To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 14.9
Inside Diameter 1 : .73
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2010 Chevrolet Cobalt Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 SS Molded Heater Hose Fuel Type: GAS Engine To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	SS	Molded Heater Hose	Fuel Type: GAS	Engine To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 28407

2010 Chevrolet Cobalt HVAC Heater Hose ZO 28407

Gates HVAC Heater Hose 28407 - Reservoir To Pipe

Position: Reservoir To Pipe

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .25
Working Pressure : 60
Weight Per Length : 6 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2010 Chevrolet Cobalt Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 SS Cut to Length, 23" - Straight Heater Hose (Standard) Fuel Type: GAS Reservoir To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	SS	Cut to Length, 23" - Straight Heater Hose (Standard)	Fuel Type: GAS	Reservoir To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 28412

2010 Chevrolet Cobalt HVAC Heater Hose ZO 28412

Gates HVAC Heater Hose 28412 - Oil Cooler To Tee-2, Tee-2 To Reservoir

Position: Oil Cooler To Tee-2, Tee-2 To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .75
Working Pressure : 50
Weight Per Length : 13.20 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2010 Chevrolet Cobalt Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 SS Cut to Length, 14" - Straight Heater Hose (Standard) Fuel Type: GAS Oil Cooler To Tee-2, Tee-2 To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14392S
CARQUEST	19815
Duralast	D88426
Gates	19815
General Motors	10314360
General Motors	22680499
Goodyear	64297
NAPA	11815

ACDelco	14475S
ACDelco	14496S
CARQUEST	19500
Duralast	B87904
Gates	19478
Gates	19500
General Motors	22717583
General Motors	15270255
NAPA	11500
NAPA	11478
Suzuki	17872-78J00

My Vehicle:

2010 Chevrolet Cobalt HVAC Heater Hose

Gates HVAC Heater Hose 18194 - Thermostat To Reservoir

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87604 - Heater Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88427 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19824 - Engine To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18259 - Pipe To Engine, Pipe-1 To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88426 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19316 - Heater To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87904 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19658 - Tee-2 To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19500 - Heater To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19815 - Engine To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28407 - Reservoir To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Oil Cooler To Tee-2, Tee-2 To Reservoir

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X