2012 Chevrolet Express Cargo HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 19670

Gates HVAC Heater Hose 19670 - Pipe-2 To Valve

Position: Pipe-2 To Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6.9
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Chevrolet Express Cargo Engines.
Engine Sub Model Notes Fit Notes Position
4.3L V6 Base Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-2 To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-2 To Valve

Part Name: HVAC Heater HoseBrand: GatesPart#: 19279

2012 Chevrolet Express Cargo HVAC Heater Hose ZO 19279

Gates HVAC Heater Hose 19279 - Valve To Auxiliary Heater Pipe-1

Position: Valve To Auxiliary Heater Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10.8
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Chevrolet Express Cargo Engines.
Engine Sub Model Notes Fit Notes Position
6.0L V8 Base W/A.C.; W/Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Valve To Auxiliary Heater Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.0L V8	Base	W/A.C.; W/Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Valve To Auxiliary Heater Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19750

2012 Chevrolet Express Cargo HVAC Heater Hose ZO 19750

Gates HVAC Heater Hose 19750 - Engine To Valve

Position: Engine To Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.7
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Chevrolet Express Cargo Engines.
Engine Sub Model Notes Fit Notes Position
6.0L V8 Base W/A.C.; W/O Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Engine To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.0L V8	Base	W/A.C.; W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Engine To Valve

Part Name: HVAC Heater HoseBrand: GatesPart#: 19665

2012 Chevrolet Express Cargo HVAC Heater Hose ZO 19665

Gates HVAC Heater Hose 19665 - Engine To Auxiliary Heater Pipe-2

Position: Engine To Auxiliary Heater Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.9
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Chevrolet Express Cargo Engines.
Engine Sub Model Notes Fit Notes Position
6.0L V8 Base Cut to fit - Molded Heater Hose Fuel Type: GAS Engine To Auxiliary Heater Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.0L V8	Base	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Engine To Auxiliary Heater Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

2012 Chevrolet Express Cargo HVAC Heater Hose ZO 28466

Gates HVAC Heater Hose 28466 - Heater To Valve, Pipe-1 To Engine, Valve To Heater, Valve To Pipe-1

Position: Heater To Valve, Pipe-1 To Engine, Valve To Heater, Valve To Pipe-1

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2012 Chevrolet Express Cargo Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Engine, Valve To Heater, Valve To Pipe-1
6.0L V8	Base	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Valve

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19749

2012 Chevrolet Express Cargo HVAC Heater Hose ZO 19749

Gates HVAC Heater Hose 19749 - Heater To Valve, Valve To Heater

Position: Heater To Valve, Valve To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 8.4
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Chevrolet Express Cargo Engines.
Engine Sub Model Notes Fit Notes Position
4.3L V6 Base Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Valve
6.0L V8 Base Cut to fit - Molded Heater Hose Fuel Type: GAS Valve To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Valve
6.0L V8	Base	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Valve To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 18933

2012 Chevrolet Express Cargo HVAC Heater Hose ZO 18933

Gates HVAC Heater Hose 18933 - Auxiliary Heater Pipe-1 To Engine

Position: Auxiliary Heater Pipe-1 To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.9
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Chevrolet Express Cargo Engines.
Engine Sub Model Notes Fit Notes Position
6.0L V8 Base Cut to fit - Molded Heater Hose Fuel Type: GAS Auxiliary Heater Pipe-1 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.0L V8	Base	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Auxiliary Heater Pipe-1 To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18297

2012 Chevrolet Express Cargo HVAC Heater Hose ZO 18297

Gates HVAC Heater Hose 18297 - Radiator To Engine

Position: Radiator To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 39.4
Inside Diameter 1 : .27
Inside Diameter 2 : .38
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Chevrolet Express Cargo Engines.
Engine Sub Model Notes Fit Notes Position
6.0L V8 Base Molded Heater Hose Fuel Type: GAS Radiator To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.0L V8	Base	Molded Heater Hose	Fuel Type: GAS	Radiator To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19082

2012 Chevrolet Express Cargo HVAC Heater Hose ZO 19082

Gates HVAC Heater Hose 19082 - Valve To Engine

Position: Valve To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 19.6
Inside Diameter 1 : .59
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Chevrolet Express Cargo Engines.
Engine Sub Model Notes Fit Notes Position
6.0L V8 Base W/A.C.; W/O Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Valve To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.0L V8	Base	W/A.C.; W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Valve To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19729

2012 Chevrolet Express Cargo HVAC Heater Hose ZO 19729

Gates HVAC Heater Hose 19729 - Auxiliary Heater Pipe-2 To Valve

Position: Auxiliary Heater Pipe-2 To Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10.5
Inside Diameter 1 : .73
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Chevrolet Express Cargo Engines.
Engine Sub Model Notes Fit Notes Position
6.0L V8 Base W/A.C.; W/Aux. Heater - Molded Heater Hose Fuel Type: GAS Auxiliary Heater Pipe-2 To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.0L V8	Base	W/A.C.; W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Auxiliary Heater Pipe-2 To Valve

Part Name: HVAC Heater HoseBrand: GatesPart#: 19761

2012 Chevrolet Express Cargo HVAC Heater Hose ZO 19761

Gates HVAC Heater Hose 19761 - Engine To Heater

Position: Engine To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 30.7
Inside Diameter 1 : .74
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Chevrolet Express Cargo Engines.
Engine Sub Model Notes Fit Notes Position
6.0L V8 Base W/O A.C.; W/O Aux. Heater - Molded Heater Hose Fuel Type: GAS Engine To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.0L V8	Base	W/O A.C.; W/O Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Engine To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

2012 Chevrolet Express Cargo HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Position: Radiator To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2012 Chevrolet Express Cargo Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base	Cut to Length, 24" - Straight Heater Hose (Standard)	Fuel Type: GAS	Radiator To Reservoir
6.0L V8	Base	Cut to Length, 9" - Straight Heater Hose (Standard)	Fuel Type: GAS	Radiator To Reservoir

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2012 Chevrolet Express Cargo HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Heater To Auxiliary Heater Pipe-1, Heater To Engine

Position: Heater To Auxiliary Heater Pipe-1, Heater To Engine

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2012 Chevrolet Express Cargo Engines.
Engine Sub Model Notes Fit Notes Position
6.0L V8 Base W/O A.C.; W/O Aux. Heater; Cut to Length, 22" - Straight Heater Hose (Standard) Fuel Type: GAS Heater To Auxiliary Heater Pipe-1, Heater To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.0L V8	Base	W/O A.C.; W/O Aux. Heater; Cut to Length, 22" - Straight Heater Hose (Standard)	Fuel Type: GAS	Heater To Auxiliary Heater Pipe-1, Heater To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 28412

2012 Chevrolet Express Cargo HVAC Heater Hose ZO 28412

Gates HVAC Heater Hose 28412 - Auxiliary Heater Pipe-2 To Heater

Position: Auxiliary Heater Pipe-2 To Heater

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .75
Working Pressure : 50
Weight Per Length : 13.20 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2012 Chevrolet Express Cargo Engines.
Engine Sub Model Notes Fit Notes Position
6.0L V8 Base W/O A.C.; W/Aux. Heater; Cut to Length, 23" - Straight Heater Hose (Standard) Fuel Type: GAS Auxiliary Heater Pipe-2 To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2012 Chevrolet Express Cargo HVAC Heater Hose

Gates HVAC Heater Hose 19670 - Pipe-2 To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19279 - Valve To Auxiliary Heater Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19750 - Engine To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19665 - Engine To Auxiliary Heater Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28466 - Heater To Valve, Pipe-1 To Engine, Valve To Heater, Valve To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19749 - Heater To Valve, Valve To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18933 - Auxiliary Heater Pipe-1 To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18297 - Radiator To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19082 - Valve To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19729 - Auxiliary Heater Pipe-2 To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19761 - Engine To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Heater To Auxiliary Heater Pipe-1, Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Auxiliary Heater Pipe-2 To Heater

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X