1991 Chevrolet G10 HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 20338

Gates HVAC Heater Hose 20338 - Valve-1 To Valve-2

Position: Valve-1 To Valve-2

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 4.9
Inside Diameter 1 : .61
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 4

Condition: New

Fitments

This Part Fits Following 1991 Chevrolet G10 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Beauville, Chevy Van, Sportvan	W/A.C.; W/Aux. Heater; Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Valve-1 To Valve-2
5.0L V8	Beauville, Chevy Van, Sportvan	W/A.C.; W/Aux. Heater; Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Valve-1 To Valve-2
5.7L V8	Sportvan	W/A.C.; W/Aux. Heater; Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Valve-1 To Valve-2

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88352

1991 Chevrolet G10 HVAC Heater Hose DY 88352

Dayco HVAC Heater Hose 88352 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 10
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1991 Chevrolet G10 Engines.
Engine Sub Model Notes Position
4.3L V6 Beauville, Chevy Van, Sportvan w/o Aux. Heater - Small I.D. Heater Hose Heater To Pipe-2

Engine	Sub Model	Notes	Position
4.3L V6	Beauville, Chevy Van, Sportvan	w/o Aux. Heater - Small I.D. Heater Hose	Heater To Pipe-2

Part Interchange

ACDelco	16143M
ACDelco	16503M
CARQUEST	19893
CARQUEST	19604
Chrysler	4592100
Duralast	C88352
Freshstart	4436
Gates	19893
Gates	19604
General Motors	22657318
General Motors	10135399
General Motors	15621579
General Motors	15605196
Goodyear	63163
NAPA	11604
NAPA	11893
V&W	304352

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28468

1991 Chevrolet G10 HVAC Heater Hose ZO 28468

Gates HVAC Heater Hose 28468 - Valve-2 To Intake Manifold

Position: Valve-2 To Intake Manifold

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 22
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 18
Arm Length 2 : 457.2
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments

This Part Fits Following 1991 Chevrolet G10 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Beauville, Chevy Van, Sportvan	W/A.C.; W/Aux. Heater; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Valve-2 To Intake Manifold
5.0L V8	Beauville, Chevy Van, Sportvan	W/A.C.; W/Aux. Heater; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Valve-2 To Intake Manifold
5.7L V8	Sportvan	W/A.C.; W/Aux. Heater; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Valve-2 To Intake Manifold

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28475

1991 Chevrolet G10 HVAC Heater Hose ZO 28475

Gates HVAC Heater Hose 28475 - Auxiliary Heater Pipe-2 To Radiator, Valve-1 To Auxiliary Heater Pipe-1

Position: Auxiliary Heater Pipe-2 To Radiator, Valve-1 To Auxiliary Heater Pipe-1

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 16
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 12
Arm Length 2 : 304.8
Inside Diameter 1 : .75
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments

This Part Fits Following 1991 Chevrolet G10 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Beauville, Chevy Van, Sportvan	W/A.C.; W/Aux. Heater - 90º Molded Heater Hose	Fuel Type: GAS	Auxiliary Heater Pipe-2 To Radiator, Valve-1 To Auxiliary Heater Pipe-1

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

1991 Chevrolet G10 HVAC Heater Hose ZO 28466

Gates HVAC Heater Hose 28466 - Heater To Valve

Position: Heater To Valve

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1991 Chevrolet G10 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Beauville, Chevy Van, Sportvan	W/Aux. Heater; W/O A.C.; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Valve
5.0L V8	Beauville, Chevy Van, Sportvan	W/Aux. Heater; W/O A.C.; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Valve
5.7L V8	Sportvan	W/Aux. Heater; W/O A.C.; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Valve

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19604

1991 Chevrolet G10 HVAC Heater Hose ZO 19604

Gates HVAC Heater Hose 19604 - Heater To Pipe-2, Heater To Radiator

Position: Heater To Pipe-2, Heater To Radiator

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.7
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1991 Chevrolet G10 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Beauville, Chevy Van, Sportvan	W/O A.C.; W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-2
5.0L V8	Beauville, Chevy Van, Sportvan	W/A.C.; W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Radiator
5.7L V8	Sportvan	W/A.C.; W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Radiator

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19652

1991 Chevrolet G10 HVAC Heater Hose ZO 19652

Gates HVAC Heater Hose 19652 - Auxiliary Heater Pipe-2 To Radiator, Auxiliary Heater Valve To Pipe

Position: Auxiliary Heater Pipe-2 To Radiator, Auxiliary Heater Valve To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 16.5
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1991 Chevrolet G10 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Beauville, Chevy Van, Sportvan	Molded Heater Hose	Fuel Type: GAS	Auxiliary Heater Pipe-2 To Radiator, Auxiliary Heater Valve To Pipe
5.0L V8	Beauville, Chevy Van, Sportvan	Molded Heater Hose	Fuel Type: GAS	Auxiliary Heater Pipe-2 To Radiator, Auxiliary Heater Valve To Pipe
5.7L V8	Sportvan	Molded Heater Hose	Fuel Type: GAS	Auxiliary Heater Pipe-2 To Radiator, Auxiliary Heater Valve To Pipe

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18908

1991 Chevrolet G10 HVAC Heater Hose ZO 18908

Gates HVAC Heater Hose 18908 - Heater To Pipe-1, Valve To Intake Manifold

Position: Heater To Pipe-1, Valve To Intake Manifold

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 41.5
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1991 Chevrolet G10 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Beauville, Chevy Van, Sportvan	W/Aux. Heater; W/O A.C. - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1, Valve To Intake Manifold
5.0L V8	Beauville, Chevy Van, Sportvan	W/Aux. Heater; W/O A.C. - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1, Valve To Intake Manifold
5.7L V8	Sportvan	W/Aux. Heater; W/O A.C. - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1, Valve To Intake Manifold

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19603

1991 Chevrolet G10 HVAC Heater Hose ZO 19603

Gates HVAC Heater Hose 19603 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.9
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1991 Chevrolet G10 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Beauville, Chevy Van, Sportvan	W/A.C.; W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-2
5.7L V8	Sportvan	W/A.C.; W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-2

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19196

1991 Chevrolet G10 HVAC Heater Hose ZO 19196

Gates HVAC Heater Hose 19196 - Heater To Intake Manifold

Position: Heater To Intake Manifold

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 41.9
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1991 Chevrolet G10 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Beauville, Chevy Van, Sportvan	W/A.C.; W/O Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Heater To Intake Manifold
5.7L V8	Sportvan	W/A.C.; W/O Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Heater To Intake Manifold

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

1991 Chevrolet G10 HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Heater To Valve, Heater To Valve-1, Valve-1 To Heater

Position: Heater To Valve, Heater To Valve-1, Valve-1 To Heater

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1991 Chevrolet G10 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Beauville, Chevy Van, Sportvan	W/A.C.; W/Aux. Heater; Cut to Length, 3" - Straight Heater Hose (Standard)	Fuel Type: GAS	Valve-1 To Heater
5.0L V8	Beauville, Chevy Van, Sportvan	W/A.C.; W/O Aux. Heater; Cut to Length, 3" - Straight Heater Hose (Standard)	Fuel Type: GAS	Heater To Valve, Heater To Valve-1
5.7L V8	Sportvan	W/A.C.; W/O Aux. Heater; Cut to Length, 3" - Straight Heater Hose (Standard)	Fuel Type: GAS	Heater To Valve, Heater To Valve-1

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28412

1991 Chevrolet G10 HVAC Heater Hose ZO 28412

Gates HVAC Heater Hose 28412 - Heater To Radiator, Heater To Valve-1, Valve To Heater

Position: Heater To Radiator, Heater To Valve-1, Valve To Heater

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .75
Working Pressure : 50
Weight Per Length : 13.20 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1991 Chevrolet G10 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Beauville, Chevy Van, Sportvan	W/A.C.; W/Aux. Heater; Cut to Length, 3" - Straight Heater Hose (Standard)	Fuel Type: GAS	Heater To Valve-1
5.0L V8	Beauville, Chevy Van, Sportvan	W/A.C.; Cut to Length, 3" - Straight Heater Hose (Standard)	Fuel Type: GAS	Heater To Radiator, Heater To Valve-1, Valve To Heater
5.7L V8	Sportvan	W/A.C.; Cut to Length, 3" - Straight Heater Hose (Standard)	Fuel Type: GAS	Heater To Radiator, Heater To Valve-1, Valve To Heater

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

1991 Chevrolet G10 HVAC Heater Hose

Gates HVAC Heater Hose 20338 - Valve-1 To Valve-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88352 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28468 - Valve-2 To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28475 - Auxiliary Heater Pipe-2 To Radiator, Valve-1 To Auxiliary Heater Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28466 - Heater To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19604 - Heater To Pipe-2, Heater To Radiator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19652 - Auxiliary Heater Pipe-2 To Radiator, Auxiliary Heater Valve To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18908 - Heater To Pipe-1, Valve To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19603 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19196 - Heater To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Heater To Valve, Heater To Valve-1, Valve-1 To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Heater To Radiator, Heater To Valve-1, Valve To Heater

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X