Home

1992 Chevrolet K1500 Suburban

My Vehicle:

1992 Chevrolet K1500 Suburban Radiator Coolant Hose

We have found 8 Radiator Coolant Hose for

1992 Chevrolet K1500 Suburban

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71884

Dayco Radiator Coolant Hose 71884 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 24
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/2
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1992 Chevrolet K1500 Suburban Engines.
Engine Sub Model Notes Position
5.7L V8 Base, Silverado Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
5.7L V8	Base, Silverado	Curved Radiator Hose	Upper

Part Interchange

ACDelco	26225X
CARQUEST	22013
Duralast	E71884
Freshstart	62441
Gates	22013
General Motors	15629051
General Motors	15627103
General Motors	15659490
General Motors	15659484
General Motors	15659484GNH
General Motors	15592553
Goodyear	62441
MasterPro	22013
NAPA	8698

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22013

1992 Chevrolet K1500 Suburban Radiator Coolant Hose ZO 22013

Gates Radiator Coolant Hose 22013 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 32.8
Inside Diameter 1 : 1.27
Inside Diameter 2 : 1.52
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Chevrolet K1500 Suburban Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, Silverado W/34" Wide Rad. - Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Base, Silverado	W/34" Wide Rad. - Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21191

1992 Chevrolet K1500 Suburban Radiator Coolant Hose ZO 21191

Gates Radiator Coolant Hose 21191 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 38.6
Inside Diameter 1 : 1.25
Inside Diameter 2 : 1.5
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Chevrolet K1500 Suburban Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, Silverado W/41" Wide Rad.; Cut to fit - Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Base, Silverado	W/41" Wide Rad.; Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21441

1992 Chevrolet K1500 Suburban Radiator Coolant Hose ZO 21441

Gates Radiator Coolant Hose 21441 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 30.5
Inside Diameter 1 : 1.25
Inside Diameter 2 : 1.5
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Chevrolet K1500 Suburban Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, Silverado W/26" Wide Rad. - Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Base, Silverado	W/26" Wide Rad. - Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21710

1992 Chevrolet K1500 Suburban Radiator Coolant Hose ZO 21710

Gates Radiator Coolant Hose 21710 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 26.5
Inside Diameter 1 : 1.5
Inside Diameter 2 : 1.75
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Chevrolet K1500 Suburban Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, Silverado W/34" Wide Rad. - Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Base, Silverado	W/34" Wide Rad. - Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21941

1992 Chevrolet K1500 Suburban Radiator Coolant Hose ZO 21941

Gates Radiator Coolant Hose 21941 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 37
Inside Diameter 1 : 1.52
Inside Diameter 2 : 1.77
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Chevrolet K1500 Suburban Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, Silverado W/41" Wide Rad. - Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Base, Silverado	W/41" Wide Rad. - Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71762

1992 Chevrolet K1500 Suburban Radiator Coolant Hose DY 71762

Dayco Radiator Coolant Hose 71762 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 15
End 1 Inside Diameter : 1 17/32
End 2 Inside Diameter : 1 25/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1992 Chevrolet K1500 Suburban Engines.
Engine Sub Model Notes Position
5.7L V8 Base, Silverado Curved Radiator Hose Lower

Engine	Sub Model	Notes	Position
5.7L V8	Base, Silverado	Curved Radiator Hose	Lower

Part Interchange

ACDelco	26207X
ACDelco	22618M
CARQUEST	23403
Duralast	D71762
Gates	21941
Gates	23403
General Motors	15655016
General Motors	15671937
General Motors	15659495
General Motors	15657362
General Motors	15659497
General Motors	15671763
General Motors	15671766
General Motors	15671907
Goodyear	62075
MasterPro	21941
NAPA	16139
NAPA	8631

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21940

1992 Chevrolet K1500 Suburban Radiator Coolant Hose ZO 21940

Gates Radiator Coolant Hose 21940 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 30.7
Inside Diameter 1 : 1.5
Inside Diameter 2 : 1.75
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Chevrolet K1500 Suburban Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, Silverado W/26" Wide Rad. - Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

1992 Chevrolet K1500 Suburban Radiator Coolant Hose

Dayco Radiator Coolant Hose 71884 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22013 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21191 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21441 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21710 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21941 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71762 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21940 - Lower

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X