2006 Chevrolet Malibu HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86819

Dayco HVAC Heater Hose 86819 - Reservoir To Pipe

Position: Reservoir To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/16
End 2 Inside Diameter : 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Position
3.9L V6 Maxx SS, SS Cut to Fit - Small I.D. Heater Hose Reservoir To Pipe
Part Interchange
ACDelco 14372S
ACDelco 16393M
CARQUEST 18247
Duralast E86819
Gates 18288
Gates 18247
General Motors 22593878
General Motors 22593876
NAPA 10288
NAPA 10247
Toyota 16261-46020
Toyota 16261-62060
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.9L V6	Maxx SS, SS	Cut to Fit - Small I.D. Heater Hose	Reservoir To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87618

2006 Chevrolet Malibu HVAC Heater Hose DY 87618

Dayco HVAC Heater Hose 87618 - Pipe To Engine

Position: Pipe To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Position
3.9L V6 Maxx SS, SS Cut to Fit - Small I.D. Heater Hose Pipe To Engine

Engine	Sub Model	Notes	Position
3.9L V6	Maxx SS, SS	Cut to Fit - Small I.D. Heater Hose	Pipe To Engine

Part Interchange

ACDelco	14161S
ACDelco	14076S
ACDelco	14585S
CARQUEST	18096
CARQUEST	18701
CARQUEST	19042
Duralast	B87618
Freshstart	4383
Freshstart	4519
Gates	19042
Gates	18701
Gates	18096
General Motors	12590012
Goodyear	63061
Goodyear	64311
Goodyear	63246
Honda	19508-P2T-A00
Honda	19508-P2A-000
Honda	19508-P08-000
Honda	19506-PM6-000
Honda	19508-P2J-000
NAPA	11042
NAPA	10701
NAPA	10096
V&W	303618

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18247

2006 Chevrolet Malibu HVAC Heater Hose ZO 18247

Gates HVAC Heater Hose 18247 - Reservoir To Pipe-5

Position: Reservoir To Pipe-5

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 24.9
Inside Diameter 1 : .33
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Fit Notes Position
3.9L V6 Maxx SS, SS Cut to fit - Molded Heater Hose Fuel Type: GAS Reservoir To Pipe-5
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.9L V6	Maxx SS, SS	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Reservoir To Pipe-5

Part Name: HVAC Heater HoseBrand: GatesPart#: 19025

2006 Chevrolet Malibu HVAC Heater Hose ZO 19025

Gates HVAC Heater Hose 19025 - Pipe-1 To Pipe-2

Position: Pipe-1 To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.1
Inside Diameter 1 : .59
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Fit Notes Position
3.9L V6 Maxx SS, SS Molded Heater Hose Fuel Type: GAS Pipe-1 To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.9L V6	Maxx SS, SS	Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Pipe-2

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80400

2006 Chevrolet Malibu HVAC Heater Hose DY 80400

Dayco HVAC Heater Hose 80400 - Pipe To Pipe, Pipe To Tee, Tee To Engine

Position: Pipe To Pipe, Pipe To Tee, Tee To Engine

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Position
3.9L V6 Maxx SS, SS 90? Molded Coolant Hose Pipe To Pipe, Pipe To Tee, Tee To Engine

Engine	Sub Model	Notes	Position
3.9L V6	Maxx SS, SS	90? Molded Coolant Hose	Pipe To Pipe, Pipe To Tee, Tee To Engine

Part Interchange

ACDelco	14228S
ACDelco	14160S
ACDelco	14229S
ACDelco	14237S
ACDelco	20227S
ACDelco	14405S
ACDelco	14148S
ACDelco	14243S
Atlas	MH-60
CARQUEST	19005
CARQUEST	19333
CARQUEST	28466
CARQUEST	21738
CARQUEST	19035
CARQUEST	21862
CARQUEST	21739
CARQUEST	21742
Chrysler	3918266
Chrysler	3918200
Chrysler	39182000
Datsun/Nissan	14056-88G05
Datsun/Nissan	21306-16A00
Datsun/Nissan	14055-57Y11
Datsun/Nissan	14056-77A01
Duralast	B80400
Ford	F1DE-8A506-AA
Ford	D4AZ-18472-G
Ford	E6AE-8A527-AA
Ford	F1DE-8A527-AA
Ford	E6DZ-8A506-A
Ford	E6DZ-8A527-A
Ford	E9SE-8597-B
Ford	E8SZ-8597-B
Ford	E6AE-8A506-AA
Ford	F40Y-18472-A
Ford	F5RZ-8290-A
Ford	E6AE-8A506-BB
Ford	F6DH-18D334-AD
Ford	F6DZ-18472-AB
Ford	F6DH-18D334-AB
Freshstart	4318
Freshstart	4101
Gates	28466
Gates	21739
Gates	21742
Gates	21862
Gates	21738
Gates	19005
Gates	19333
Gates	19645
Gates	19035
General Motors	10215999
General Motors	10197652
General Motors	10171104
General Motors	10284263
General Motors	55036950
General Motors	15708635
General Motors	15713591
General Motors	15553626
General Motors	12603761
General Motors	35232953
General Motors	12590013
General Motors	3523265
General Motors	10021318
General Motors	10145098
General Motors	10135305
General Motors	10038502
General Motors	21030565
General Motors	15984157
General Motors	22685822
General Motors	25662102
General Motors	10145118
General Motors	30013103
General Motors	25525213
General Motors	22704430
General Motors	22704428
Goodyear	63052
Goodyear	63806
Honda	79118-S3V-A00
Honda	19508-P72-000
Honda	19504-PEO-010
Honda	19504-PE0-010
Honda	79118-S3V-A01
Honda	79117-S3V-A00
Honda	79722-SD5-A00
Honda	19508-PE0-010
Isuzu	8-94384-326-3
Isuzu	8-94384-326-2
Kia	K01315421
Lazorlite	L34-8589
Mazda	KJ01-15-261
Motorcraft	KM1809
Motorcraft	KM1748
NAPA	11035
NAPA	9807
NAPA	11333
NAPA	11005
Pirelli	43806
Toyota	16261-74010
Toyota	16261-74030
Toyota	16264-74030
Toyota	87245-3D520
Volvo Cars	3M5H-18K580-AB

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88368

2006 Chevrolet Malibu HVAC Heater Hose DY 88368

Dayco HVAC Heater Hose 88368 - Tee To Reservoir

Position: Tee To Reservoir

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Position
3.9L V6 Maxx SS, SS Small I.D. Heater Hose Tee To Reservoir

Engine	Sub Model	Notes	Position
3.9L V6	Maxx SS, SS	Small I.D. Heater Hose	Tee To Reservoir

Part Interchange

ACDelco	14182S
ACDelco	14468S
CARQUEST	19622
Duralast	C88368
Ford	E6ZZ-18472-A
Freshstart	63135
Freshstart	4633
Gates	19622
Gates	19845
General Motors	25877867
General Motors	25837525
General Motors	21031493
General Motors	15793366
General Motors	25837524
General Motors	21031413
Goodyear	63135
Goodyear	63498
NAPA	11622
NAPA	11845
V&W	304368

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87968

2006 Chevrolet Malibu HVAC Heater Hose DY 87968

Dayco HVAC Heater Hose 87968 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 11 1/2
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 15/16
End 2 Inside Diameter : 3/4
End 2 Outside Diameter : 1 1/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Position
2.2L L4 LS, LT Top Hose - Small I.D. Heater Hose Heater Outlet
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.2L L4	LS, LT	Top Hose - Small I.D. Heater Hose	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19838

2006 Chevrolet Malibu HVAC Heater Hose ZO 19838

Gates HVAC Heater Hose 19838 - Engine To Reservoir

Position: Engine To Reservoir

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 16.4
Inside Diameter 1 : .74
Inside Diameter 2 : .79
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 LS, LT Molded Heater Hose Fuel Type: GAS Engine To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	LS, LT	Molded Heater Hose	Fuel Type: GAS	Engine To Reservoir

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80402

2006 Chevrolet Malibu HVAC Heater Hose DY 80402

Dayco HVAC Heater Hose 80402 - Heater Outlet

Position: Heater Outlet

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Position
3.5L V6 LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ 90? Molded Coolant Hose Heater Outlet

Engine	Sub Model	Notes	Position
3.5L V6	LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ	90? Molded Coolant Hose	Heater Outlet

Part Interchange

ACDelco	16481M
ACDelco	16395M
ACDelco	16347M
ACDelco	16677M
ACDelco	18149L
ACDelco	22570M
ACDelco	18408L
ACDelco	16340M
ACDelco	18021L
Atlas	MH-62
CARQUEST	19323
CARQUEST	28468
CARQUEST	19413
CARQUEST	18447
Chrysler	4462374
Chrysler	55036089
Chrysler	55036507
Chrysler	55036413AB
Chrysler	5058097AD
Chrysler	4677421
Chrysler	55036948
Chrysler	55056674AC
Datsun/Nissan	92400-6M100
Datsun/Nissan	92410-6Z500
Datsun/Nissan	92410-6M100
Datsun/Nissan	92400-9E000
Datsun/Nissan	92400-6Z500
Duralast	E80402
Freshstart	4103
Gates	28468
Gates	23149
Gates	19890
Gates	19323
Gates	19310
Gates	12083
Gates	19413
Gates	18447
Gates	19551
General Motors	94858013
General Motors	22682501
General Motors	15286611
General Motors	15570994
General Motors	15821186
General Motors	22627222
Goodyear	63818
Honda	79721-SX0-000
Honda	79725-SDB-A60
Honda	79725-SDA-A00
Honda	79721-SDB-A60
Honda	79725-S9A-A00
Hyundai	97312-2F400
Hyundai	97321-38000
Hyundai	97312-26200
Hyundai	97311-38030
Hyundai	97321-2D100
Hyundai	97312-2D100
Hyundai	97311-38300
Hyundai	97322-26200
NAPA	11413
NAPA	11310
NAPA	11551
NAPA	11323
NAPA	11890
NAPA	9880
NAPA	10447
NAPA	9809
NAPA	13083
Pirelli	43818
Subaru (cars)	72015-AA020
Subaru (cars)	72421-AE02A
Subaru (cars)	72421-AE02B
Suzuki	17871-57B03
Suzuki	17871-57B02
Toyota	87245-0C030
Toyota	87245-21190
Toyota	87245-12D90
Toyota	87245-21192
Volvo Cars	1282933001

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19447

2006 Chevrolet Malibu HVAC Heater Hose ZO 19447

Gates HVAC Heater Hose 19447 - Heater To Engine

Position: Heater To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 14.4
Inside Diameter 1 : .62
Inside Diameter 2 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 LS, LT Molded Heater Hose Fuel Type: GAS Heater To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	LS, LT	Molded Heater Hose	Fuel Type: GAS	Heater To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86109

2006 Chevrolet Malibu HVAC Heater Hose DY 86109

Dayco HVAC Heater Hose 86109 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 23/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Position
2.2L L4 LS, LT Bottom Hose - Small I.D. Heater Hose Heater Inlet

Engine	Sub Model	Notes	Position
2.2L L4	LS, LT	Bottom Hose - Small I.D. Heater Hose	Heater Inlet

Part Interchange

ACDelco	16219M
ACDelco	14516S
ACDelco	14480S
CARQUEST	19733
Datsun/Nissan	92400-EA200
Duralast	D86109
Gates	19878
Gates	19733
Gates	19850
General Motors	25679318
General Motors	3528978
General Motors	3543620
General Motors	3544757
General Motors	15776163
General Motors	22685157
General Motors	22682498
General Motors	15776161
NAPA	11850
NAPA	11878
NAPA	11733
Saturn	22615850

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87763

2006 Chevrolet Malibu HVAC Heater Hose DY 87763

Dayco HVAC Heater Hose 87763 - Heater Inlet, Heater To Pipe

Position: Heater Inlet, Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 19/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments

This Part Fits Following 2006 Chevrolet Malibu Engines.

Engine	Sub Model	Notes	Position
3.5L V6	LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ	Cut to Fit - Hose Must Be Cut On Both Ends - Small I.D. Heater Hose	Heater Inlet
3.9L V6	Maxx SS, SS	Small I.D. Heater Hose	Heater To Pipe

Part Interchange

ACDelco	16385M
ACDelco	16346M
ACDelco	16136M
CARQUEST	19049
Chrysler	05058672AC
Duralast	D87763
Gates	19322
Gates	19392
Gates	19049
General Motors	22682499
General Motors	22627220
General Motors	22659276
Goodyear	63994
NAPA	11049
NAPA	11322
NAPA	11392

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86090

2006 Chevrolet Malibu HVAC Heater Hose DY 86090

Dayco HVAC Heater Hose 86090 - Filler Reservoir To Radiator

Position: Filler Reservoir To Radiator

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 28
End 1 Inside Diameter : 23/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Position
3.5L V6 LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ Small I.D. Heater Hose Filler Reservoir To Radiator
Part Interchange
ACDelco 18121L
ACDelco 18338L
CARQUEST 19615
CARQUEST 19839
Duralast E86090
Freshstart 63140
Gates 19839
Gates 19615
General Motors 15545650
General Motors 22682507
General Motors 15592018
Goodyear 63140
NAPA 11839
NAPA 11615
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.5L V6	LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ	Small I.D. Heater Hose	Filler Reservoir To Radiator

Part Name: HVAC Heater HoseBrand: GatesPart#: 19850

2006 Chevrolet Malibu HVAC Heater Hose ZO 19850

Gates HVAC Heater Hose 19850 - Engine To Heater

Position: Engine To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.6
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 LS, LT Molded Heater Hose Fuel Type: GAS Engine To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	LS, LT	Molded Heater Hose	Fuel Type: GAS	Engine To Heater

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88351

2006 Chevrolet Malibu HVAC Heater Hose DY 88351

Dayco HVAC Heater Hose 88351 - Tee To Reservoir

Position: Tee To Reservoir

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Position
2.2L L4 LS, LT Cut to Fit - Hose Must Be Cut On Both Ends - Small I.D. Heater Hose Tee To Reservoir

Engine	Sub Model	Notes	Position
2.2L L4	LS, LT	Cut to Fit - Hose Must Be Cut On Both Ends - Small I.D. Heater Hose	Tee To Reservoir

Part Interchange

ACDelco	18117L
Acura	19504-RWC-A00
CARQUEST	19602
Duralast	E88351
Freshstart	63242
Gates	19602
General Motors	15802561
General Motors	22731266
General Motors	22682506
General Motors	14101516
General Motors	10069157
General Motors	10021320
Goodyear	63242
NAPA	11602
Saturn	22712141
Saturn	15247033
V&W	304351

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18971

2006 Chevrolet Malibu HVAC Heater Hose ZO 18971

Gates HVAC Heater Hose 18971 - Pipe-2 To Water Pump

Position: Pipe-2 To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 11.5
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Fit Notes Position
3.9L V6 Maxx SS, SS Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-2 To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.9L V6	Maxx SS, SS	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-2 To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 19322

2006 Chevrolet Malibu HVAC Heater Hose ZO 19322

Gates HVAC Heater Hose 19322 - Pipe-3 To Heater, Pipe-4 To Heater

Position: Pipe-3 To Heater, Pipe-4 To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 17.8
Inside Diameter 1 : .61
Inside Diameter 2 : .74
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2006 Chevrolet Malibu Engines.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Base	Molded Heater Hose	Fuel Type: GAS	Pipe-3 To Heater
3.9L V6	Maxx SS, SS	Molded Heater Hose	Fuel Type: GAS	Pipe-4 To Heater

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19839

2006 Chevrolet Malibu HVAC Heater Hose ZO 19839

Gates HVAC Heater Hose 19839 - Reservoir To Radiator

Position: Reservoir To Radiator

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 38.1
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Base Molded Heater Hose Fuel Type: GAS Reservoir To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Base	Molded Heater Hose	Fuel Type: GAS	Reservoir To Radiator

Part Name: HVAC Heater HoseBrand: GatesPart#: 18285

2006 Chevrolet Malibu HVAC Heater Hose ZO 18285

Gates HVAC Heater Hose 18285 - Reservoir To Engine

Position: Reservoir To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 31.4
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 LS, LT Molded Heater Hose Fuel Type: GAS Reservoir To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	LS, LT	Molded Heater Hose	Fuel Type: GAS	Reservoir To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19845

2006 Chevrolet Malibu HVAC Heater Hose ZO 19845

Gates HVAC Heater Hose 19845 - Tee To Reservoir

Position: Tee To Reservoir

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.7
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Fit Notes Position
3.9L V6 Maxx SS, SS Molded Heater Hose Fuel Type: GAS Tee To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.9L V6	Maxx SS, SS	Molded Heater Hose	Fuel Type: GAS	Tee To Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 19456

2006 Chevrolet Malibu HVAC Heater Hose ZO 19456

Gates HVAC Heater Hose 19456 - Tee To Pipe-1

Position: Tee To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.5
Inside Diameter 1 : .63
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Fit Notes Position
3.9L V6 Maxx SS, SS Molded Heater Hose Fuel Type: GAS Tee To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.9L V6	Maxx SS, SS	Molded Heater Hose	Fuel Type: GAS	Tee To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

2006 Chevrolet Malibu HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Reservoir To Pipe-2

Position: Reservoir To Pipe-2

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Base Cut to Length, 19" - Straight Heater Hose (Standard) Fuel Type: GAS Reservoir To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Base	Cut to Length, 19" - Straight Heater Hose (Standard)	Fuel Type: GAS	Reservoir To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2006 Chevrolet Malibu HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Pipe-3 To Pipe-4

Position: Pipe-3 To Pipe-4

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Malibu Engines.
Engine Sub Model Notes Fit Notes Position
3.9L V6 Maxx SS, SS Cut to Length, 3" - Straight Heater Hose (Standard) Fuel Type: GAS Pipe-3 To Pipe-4
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14372S
ACDelco	16393M
CARQUEST	18247
Duralast	E86819
Gates	18288
Gates	18247
General Motors	22593878
General Motors	22593876
NAPA	10288
NAPA	10247
Toyota	16261-46020
Toyota	16261-62060

ACDelco	18121L
ACDelco	18338L
CARQUEST	19615
CARQUEST	19839
Duralast	E86090
Freshstart	63140
Gates	19839
Gates	19615
General Motors	15545650
General Motors	22682507
General Motors	15592018
Goodyear	63140
NAPA	11839
NAPA	11615

My Vehicle:

2006 Chevrolet Malibu HVAC Heater Hose

Dayco HVAC Heater Hose 86819 - Reservoir To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87618 - Pipe To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18247 - Reservoir To Pipe-5

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19025 - Pipe-1 To Pipe-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80400 - Pipe To Pipe, Pipe To Tee, Tee To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88368 - Tee To Reservoir

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87968 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19838 - Engine To Reservoir

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80402 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19447 - Heater To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86109 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87763 - Heater Inlet, Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86090 - Filler Reservoir To Radiator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19850 - Engine To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88351 - Tee To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18971 - Pipe-2 To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19322 - Pipe-3 To Heater, Pipe-4 To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19839 - Reservoir To Radiator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18285 - Reservoir To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19845 - Tee To Reservoir

Description: