2000 Chevrolet Metro Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: GatesPart#: 20802

Gates Radiator Coolant Hose 20802 - Lower - Engine To Pipe

Position: Lower - Engine To Pipe

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 7.2
Inside Diameter 1 : .92
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet Metro Engines.
Engine Sub Model Notes Fit Notes Position
1.3L L4 Base, LSi Cut to fit - Molded Coolant Hose Fuel Type: GAS - Transmission Control Type: Automatic Lower - Engine To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.3L L4	Base, LSi	Cut to fit - Molded Coolant Hose	Fuel Type: GAS - Transmission Control Type: Automatic	Lower - Engine To Pipe

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 70982

2000 Chevrolet Metro Radiator Coolant Hose DY 70982

Dayco Radiator Coolant Hose 70982 - Lower - Pipe To Pipe

Position: Lower - Pipe To Pipe

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 1 1/16
End 2 Inside Diameter : 1 1/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet Metro Engines.
Engine Sub Model Notes Position
1.3L L4 Base, LSi Cut to Fit - Curved Radiator Hose Lower - Pipe To Pipe

Engine	Sub Model	Notes	Position
1.3L L4	Base, LSi	Cut to Fit - Curved Radiator Hose	Lower - Pipe To Pipe

Part Interchange

ACDelco	20004S
ACDelco	20333S
Atlas	MC67
Beck/Arnley	142-2385
Beck/Arnley	142-5131
Beck/Arnley	142-2377
CARQUEST	22518
CARQUEST	20157
Datsun/Nissan	21501-H5000
Datsun/Nissan	21501-H5015
Datsun/Nissan	21501-H8500
Datsun/Nissan	21501-H7211
Datsun/Nissan	21501-H5020
Datsun/Nissan	14055-0W000
Datsun/Nissan	14055-V5201
Datsun/Nissan	14055-4S110
Duralast	B70982
Freshstart	038
Gates	20157
Gates	22518
General Motors	30005547
General Motors	30013098
Goodyear	60998
Goodyear	66683
John Deere	R49474
Lazorlite	L34-1568
Lazorlite	L34-1576
Lazorlite	L34-1584
Motorcraft	KM1069
NAPA	9151
NAPA	7848
Pirelli	MR934
Pirelli	43011
Suzuki	17855-63B20
Suzuki	17855-63B00
Suzuki	17855-86200
Suzuki	17855-63B21
Suzuki	17851-60B00
Yanmar	121250-49030

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 70942

2000 Chevrolet Metro Radiator Coolant Hose DY 70942

Dayco Radiator Coolant Hose 70942 - Lower - Pipe To Radiator

Position: Lower - Pipe To Radiator

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 14
End 1 Inside Diameter : 1 1/16
End 2 Inside Diameter : 1 1/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet Metro Engines.
Engine Sub Model Notes Fit Notes Position
1.3L L4 Base, LSi Cut to Fit - Curved Radiator Hose Transmission Control Type: Standard Lower - Pipe To Radiator

Engine	Sub Model	Notes	Fit Notes	Position
1.3L L4	Base, LSi	Cut to Fit - Curved Radiator Hose	Transmission Control Type: Standard	Lower - Pipe To Radiator

Part Interchange

ACDelco	22109M
Atlas	MC110
AutoZone	C1029
Beck/Arnley	142-5914
Beck/Arnley	142-6102
Beck/Arnley	142-5913
Beck/Arnley	142-5788
Beck/Arnley	142-5123
CARQUEST	21029
Chief	C1029
Chrysler	4140574
Chrysler	4266298
Datsun/Nissan	21501-01A00
Datsun/Nissan	21503-M4961
Datsun/Nissan	21501-M6600
Duralast	C70942
Freshstart	224
Freshstart	285
Gates	21029
Goodyear	61282
Goodyear	61056
Mopar	H0061056
Mopar	H0061282
Motorcraft	KM1221
NAPA	7741
Pirelli	41056
Pirelli	41282
Suzuki	17854-51G00
Yanmar	129350-49010
Yanmar	121450-49020

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 70834

2000 Chevrolet Metro Radiator Coolant Hose DY 70834

Dayco Radiator Coolant Hose 70834 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 1 1/16
End 2 Inside Diameter : 1 1/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet Metro Engines.
Engine Sub Model Notes Position
1.3L L4 Base, LSi Cut to Fit - Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
1.3L L4	Base, LSi	Cut to Fit - Curved Radiator Hose	Upper

Part Interchange

ACDelco	20100S
ACDelco	20313S
Atlas	MC68
AutoZone	C1008
Beck/Arnley	142-4043
Beck/Arnley	142-2302
Beck/Arnley	142-3920
Beck/Arnley	142-4035
CARQUEST	21008
CARQUEST	22355
Chrysler	4140572
Duralast	B70834
Ford	E9BZ-8260-A
Ford	E8BZ-8260-A
Freshstart	041
Gates	21008
Gates	20895
Gates	22355
General Motors	30019602
Goodyear	61002
Honda	19502-634-000
Honda	19502-639-000
Honda	19502-634-010
Honda	19502-639-010
John Deere	CH11773
John Deere	CH15528
Motorcraft	KM1759
Motorcraft	KM1639
NAPA	7733
NAPA	8988
Pirelli	MR202
Pirelli	41151
Suzuki	17852-64B00

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21029

2000 Chevrolet Metro Radiator Coolant Hose ZO 21029

Gates Radiator Coolant Hose 21029 - Lower - Pipe To Radiator

Position: Lower - Pipe To Radiator

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 16.6
Inside Diameter 1 : 1
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet Metro Engines.
Engine Sub Model Notes Fit Notes Position
1.3L L4 Base, LSi Cut to fit - Molded Coolant Hose Fuel Type: GAS - Transmission Control Type: Standard Lower - Pipe To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.3L L4	Base, LSi	Cut to fit - Molded Coolant Hose	Fuel Type: GAS - Transmission Control Type: Standard	Lower - Pipe To Radiator

Part Name: Radiator Coolant HoseBrand: GatesPart#: 20157

2000 Chevrolet Metro Radiator Coolant Hose ZO 20157

Gates Radiator Coolant Hose 20157 - Lower - Pipe To Pipe

Position: Lower - Pipe To Pipe

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 12.2
Inside Diameter 1 : 1.06
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet Metro Engines.
Engine Sub Model Notes Fit Notes Position
1.3L L4 Base, LSi Cut to fit - Molded Coolant Hose Fuel Type: GAS - Transmission Control Type: Standard Lower - Pipe To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.3L L4	Base, LSi	Cut to fit - Molded Coolant Hose	Fuel Type: GAS - Transmission Control Type: Standard	Lower - Pipe To Pipe

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 70894

2000 Chevrolet Metro Radiator Coolant Hose DY 70894

Dayco Radiator Coolant Hose 70894 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 16 1/2
End 1 Inside Diameter : 1
End 2 Inside Diameter : 1
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet Metro Engines.
Engine Sub Model Notes Position
1.0L L3 Base Cut to Fit - Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
1.0L L3	Base	Cut to Fit - Curved Radiator Hose	Upper

Part Interchange

ACDelco	24076L
Atlas	MC97
AutoZone	C1057
Beck/Arnley	142-4332
CARQUEST	21057
Duralast	D70894
Gates	21057
General Motors	96058064
General Motors	96060157
General Motors	96055559
Goodyear	61063
Lazorlite	L34-1339
NAPA	7769
Subaru (cars)	645077720
Suzuki	17852-52G00
Suzuki	17852-60A00
Suzuki	17852-63A00

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21517

2000 Chevrolet Metro Radiator Coolant Hose ZO 21517

Gates Radiator Coolant Hose 21517 - Lower - Pipe To Radiator, Lower - Radiator To Pipe-1

Position: Lower - Pipe To Radiator, Lower - Radiator To Pipe-1

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 14.3
Inside Diameter 1 : .97
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2000 Chevrolet Metro Engines.

Engine	Sub Model	Notes	Fit Notes	Position
1.0L L3	Base	Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Lower - Radiator To Pipe-1
1.3L L4	Base, LSi	Cut to fit - Molded Coolant Hose	Fuel Type: GAS - Transmission Control Type: Automatic	Lower - Pipe To Radiator

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71847

2000 Chevrolet Metro Radiator Coolant Hose DY 71847

Dayco Radiator Coolant Hose 71847 - Lower - Pipe To Radiator

Position: Lower - Pipe To Radiator

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 1 1/16
End 2 Inside Diameter : 1 1/16
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet Metro Engines.
Engine Sub Model Notes Fit Notes Position
1.3L L4 Base, LSi Curved Radiator Hose Transmission Control Type: Automatic Lower - Pipe To Radiator
Part Interchange
ACDelco 16193M
CARQUEST 21517
Duralast B71847
Gates 21517
General Motors 30013099
NAPA 8230
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.3L L4	Base, LSi	Curved Radiator Hose	Transmission Control Type: Automatic	Lower - Pipe To Radiator

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21056

2000 Chevrolet Metro Radiator Coolant Hose ZO 21056

Gates Radiator Coolant Hose 21056 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 19.7
Inside Diameter 1 : 1
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet Metro Engines.
Engine Sub Model Notes Fit Notes Position
1.0L L3 Base Preferred Hose - Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.0L L3	Base	Preferred Hose - Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21057

2000 Chevrolet Metro Radiator Coolant Hose ZO 21057

Gates Radiator Coolant Hose 21057 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 18.1
Inside Diameter 1 : 1
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet Metro Engines.
Engine Sub Model Notes Fit Notes Position
1.0L L3 Base Optional Hose; Cut to fit - Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	16193M
CARQUEST	21517
Duralast	B71847
Gates	21517
General Motors	30013099
NAPA	8230

My Vehicle:

2000 Chevrolet Metro Radiator Coolant Hose

Gates Radiator Coolant Hose 20802 - Lower - Engine To Pipe

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 70982 - Lower - Pipe To Pipe

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 70942 - Lower - Pipe To Radiator

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 70834 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21029 - Lower - Pipe To Radiator

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 20157 - Lower - Pipe To Pipe

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 70894 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21517 - Lower - Pipe To Radiator, Lower - Radiator To Pipe-1

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71847 - Lower - Pipe To Radiator

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21056 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21057 - Upper

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X