2004 Chevrolet Tracker HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87310

Dayco HVAC Heater Hose 87310 - Heater Outlet (Rear)

Position: Heater Outlet (Rear)

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 7 1/2
End 1 Inside Diameter : 1/2
End 2 Inside Diameter : 1/2
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2004 Chevrolet Tracker Engines.
Engine Sub Model Notes Position
2.5L V6 Base, LT, ZR2 Small I.D. Heater Hose Heater Outlet (Rear)
Part Interchange
ACDelco 14065S
CARQUEST 18422
Duralast B87310
Freshstart 4427
Gates 18422
General Motors 30025414
Goodyear 63156
NAPA 10422
Suzuki 17862-67D20
Suzuki 17872-67D20
V&W 303310
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L V6	Base, LT, ZR2	Small I.D. Heater Hose	Heater Outlet (Rear)

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80393

2004 Chevrolet Tracker HVAC Heater Hose DY 80393

Dayco HVAC Heater Hose 80393 - Engine To Heater

Position: Engine To Heater

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 1/2
End 2 Inside Diameter : 1/2
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2004 Chevrolet Tracker Engines.
Engine Sub Model Notes Position
2.5L V6 Base, LT, ZR2 90? Molded Coolant Hose Engine To Heater

Engine	Sub Model	Notes	Position
2.5L V6	Base, LT, ZR2	90? Molded Coolant Hose	Engine To Heater

Part Interchange

ACDelco	14272S
ACDelco	14242S
CARQUEST	28460
CARQUEST	18462
Datsun/Nissan	14056-84A10
Duralast	B80393
Gates	28460
Gates	18462
General Motors	30025413
Honda	19508-RNA-A01
Isuzu	8-94427-963-3
NAPA	9801
NAPA	10462
Suzuki	17871-73X50
Suzuki	17871-67D20
Suzuki	17861-67D20
Toyota	16264-74101
Toyota	16267-74081

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80394

2004 Chevrolet Tracker HVAC Heater Hose DY 80394

Dayco HVAC Heater Hose 80394 - Heater Outlet (Front)

Position: Heater Outlet (Front)

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 1/2
End 2 Inside Diameter : 1/2
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2004 Chevrolet Tracker Engines.
Engine Sub Model Notes Position
2.5L V6 Base, LT, ZR2 90? Molded Coolant Hose Heater Outlet (Front)

Engine	Sub Model	Notes	Position
2.5L V6	Base, LT, ZR2	90? Molded Coolant Hose	Heater Outlet (Front)

Part Interchange

ACDelco	14242S
ACDelco	16197M
ACDelco	14064S
CARQUEST	28460
CARQUEST	28461
CARQUEST	18421
Duralast	D80394
Freshstart	4620
Gates	18421
Gates	28460
Gates	28461
General Motors	30025044
General Motors	30014384
Goodyear	63706
Goodyear	63347
Honda	19508-PK1-000
Honda	19508-PH1-000
Isuzu	8-97167-694-0
Isuzu	8-97167-694-2
Isuzu	8-97167-694-1
NAPA	10421
NAPA	9802
NAPA	9801
Suzuki	17851-52G00
Suzuki	17871-65D00
Suzuki	17872-65D10
Suzuki	17873-77E01
Suzuki	17872-65D00
Suzuki	17872-51G01
Suzuki	17852-51G11
Suzuki	17871-65D10
Toyota	87245-08110

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18011

2004 Chevrolet Tracker HVAC Heater Hose ZO 18011

Gates HVAC Heater Hose 18011 - Heater To Engine

Position: Heater To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.6
Inside Diameter 1 : .25
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Chevrolet Tracker Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 Base, LT, ZR2 Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	Base, LT, ZR2	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18422

2004 Chevrolet Tracker HVAC Heater Hose ZO 18422

Gates HVAC Heater Hose 18422 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10.5
Inside Diameter 1 : .5
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Chevrolet Tracker Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 Base, LT, ZR2 Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	Base, LT, ZR2	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 28461

2004 Chevrolet Tracker HVAC Heater Hose ZO 28461

Gates HVAC Heater Hose 28461 - Pipe-1 To Water Pump

Position: Pipe-1 To Water Pump

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 16
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 12
Arm Length 2 : 304.8
Inside Diameter 1 : .5
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Chevrolet Tracker Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 Base, LT, ZR2 Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Pipe-1 To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	Base, LT, ZR2	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

2004 Chevrolet Tracker HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Pipe-1 To Throttle Body, Radiator To Reservoir, Thermostat To Engine, Throttle Body To Engine, Throttle Body To Pipe-2, Water Pump To Throttle Body

Position: Pipe-1 To Throttle Body, Radiator To Reservoir, Thermostat To Engine, Throttle Body To Engine, Throttle Body To Pipe-2, Water Pump To Throttle Body

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2004 Chevrolet Tracker Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	Base, LT, ZR2	Cut to Length, 14" - Straight Heater Hose (Standard)	Fuel Type: GAS	Pipe-1 To Throttle Body, Radiator To Reservoir, Thermostat To Engine, Throttle Body To Engine, Throttle Body To Pipe-2, Water Pump To Throttle Body

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2004 Chevrolet Tracker HVAC Heater Hose

Dayco HVAC Heater Hose 87310 - Heater Outlet (Rear)

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80393 - Engine To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80394 - Heater Outlet (Front)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18011 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18422 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28461 - Pipe-1 To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Pipe-1 To Throttle Body, Radiator To Reservoir, Thermostat To Engine, Throttle Body To Engine, Throttle Body To Pipe-2, Water Pump To Throttle Body

Description:

Part Specifications:

Features:

Related HVAC Parts

ACDelco	14065S
CARQUEST	18422
Duralast	B87310
Freshstart	4427
Gates	18422
General Motors	30025414
Goodyear	63156
NAPA	10422
Suzuki	17862-67D20
Suzuki	17872-67D20
V&W	303310

My Vehicle:

2004 Chevrolet Tracker HVAC Heater Hose

Dayco HVAC Heater Hose 87310 - Heater Outlet (Rear)

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80393 - Engine To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80394 - Heater Outlet (Front)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18011 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18422 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28461 - Pipe-1 To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Pipe-1 To Throttle Body, Radiator To Reservoir, Thermostat To Engine, Throttle Body To Engine, Throttle Body To Pipe-2, Water Pump To Throttle Body

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X