Home

2001 Chrysler PT Cruiser

My Vehicle:

2001 Chrysler PT Cruiser HVAC Heater Hose

We have found 4 HVAC Heater Hose for

2001 Chrysler PT Cruiser

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87656

Dayco HVAC Heater Hose 87656 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2001 Chrysler PT Cruiser Engines.
Engine Sub Model Notes Position
2.4L L4 Base, Limited, Touring Top Hose - Small I.D. Heater Hose Heater To Pipe

Engine	Sub Model	Notes	Position
2.4L L4	Base, Limited, Touring	Top Hose - Small I.D. Heater Hose	Heater To Pipe

Part Interchange

ACDelco	16409M
ACDelco	16410M
ACDelco	14443S
ACDelco	16056M
CARQUEST	19438
CARQUEST	18782
CARQUEST	19437
Chrysler	5058855AA
Chrysler	05058671AB
Chrysler	5058856AA
Duralast	D87656
Freshstart	4400
Gates	19438
Gates	19437
Gates	19391
Gates	18782
General Motors	12639068
Goodyear	63129
Honda	39312-SB6-000
Honda	39312-SB2-000
Hyundai	97311-2E000
NAPA	10782
NAPA	19438
NAPA	11391
NAPA	11437
V&W	303656

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19437

2001 Chrysler PT Cruiser HVAC Heater Hose ZO 19437

Gates HVAC Heater Hose 19437 - Heater Inlet

Position: Heater Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 18.7
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Chrysler PT Cruiser Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, Limited, Touring, Classic Molded Heater Hose Fuel Type: GAS Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, Limited, Touring, Classic	Molded Heater Hose	Fuel Type: GAS	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19438

2001 Chrysler PT Cruiser HVAC Heater Hose ZO 19438

Gates HVAC Heater Hose 19438 - Heater Outlet

Position: Heater Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 18.4
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Chrysler PT Cruiser Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, Limited, Touring, Classic Molded Heater Hose Fuel Type: GAS Heater Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, Limited, Touring, Classic	Molded Heater Hose	Fuel Type: GAS	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2001 Chrysler PT Cruiser HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Filler Neck To Pipe-2, Pipe-1 To Water Pump

Position: Filler Neck To Pipe-2, Pipe-1 To Water Pump

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2001 Chrysler PT Cruiser Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, Limited, Touring, Classic Cut to Length, 4" - Straight Heater Hose (Standard) Fuel Type: GAS Filler Neck To Pipe-2, Pipe-1 To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2001 Chrysler PT Cruiser HVAC Heater Hose

Dayco HVAC Heater Hose 87656 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19437 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19438 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Filler Neck To Pipe-2, Pipe-1 To Water Pump

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X