1996 Chrysler Sebring HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18709

Gates HVAC Heater Hose 18709 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 23.2
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Chrysler Sebring Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 LX Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	LX	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 18772

1996 Chrysler Sebring HVAC Heater Hose ZO 18772

Gates HVAC Heater Hose 18772 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.7
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Chrysler Sebring Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 JX, JXi, LX, LXi Cut to fit - Molded Heater Hose Fuel Type: GAS - Body Type: Coupe Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	JX, JXi, LX, LXi	Cut to fit - Molded Heater Hose	Fuel Type: GAS - Body Type: Coupe	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86121

1996 Chrysler Sebring HVAC Heater Hose DY 86121

Dayco HVAC Heater Hose 86121 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15 1/2
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1996 Chrysler Sebring Engines.
Engine Sub Model Notes Position
2.5L V6 JX, JXi, LX, LXi Small I.D. Heater Hose Heater Inlet

Engine	Sub Model	Notes	Position
2.5L V6	JX, JXi, LX, LXi	Small I.D. Heater Hose	Heater Inlet

Part Interchange

ACDelco	18083L
ACDelco	18095L
ACDelco	16300M
ACDelco	16051M
CARQUEST	18969
CARQUEST	18774
CARQUEST	19004
Chrysler	55056966AA
Chrysler	55056711AC
Chrysler	55036383
Chrysler	5005370AB
Duralast	E86121
Freshstart	4353
Gates	19269
Gates	19004
Gates	18774
Gates	18969
General Motors	15768212
General Motors	22598982
General Motors	14103584
General Motors	22551237
Goodyear	63089
Hyundai	97312-38300
Hyundai	97321-38100
Hyundai	97322-38000
Hyundai	97312-38030
Kia	97311-38100
NAPA	10774
NAPA	10969
NAPA	11269
NAPA	11004
Suzuki	17871-54G10
Suzuki	17872-54G10

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87689

1996 Chrysler Sebring HVAC Heater Hose DY 87689

Dayco HVAC Heater Hose 87689 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 16
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1996 Chrysler Sebring Engines.
Engine Sub Model Notes Position
2.0L L4 LX Small I.D. Heater Hose Heater To Pipe
Part Interchange
ACDelco 18051L
CARQUEST 18851
Duralast E87689
Freshstart 4424
Gates 18851
Goodyear 63153
Honda 79725-SE0-000
NAPA 10851
V&W 303689
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	LX	Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87619

1996 Chrysler Sebring HVAC Heater Hose DY 87619

Dayco HVAC Heater Hose 87619 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1996 Chrysler Sebring Engines.
Engine Sub Model Notes Position
2.5L V6 JX, JXi, LX, LXi Small I.D. Heater Hose Heater To Pipe

Engine	Sub Model	Notes	Position
2.5L V6	JX, JXi, LX, LXi	Small I.D. Heater Hose	Heater To Pipe

Part Interchange

ACDelco	16585M
ACDelco	18023L
CARQUEST	87619
CARQUEST	18703
Chrysler	55038222AB
Duralast	E87619
Ford	F4BZ-18472-A
Gates	87619
Gates	18703
General Motors	10425109
General Motors	10281555
General Motors	10233198
General Motors	10233197
NAPA	10527
NAPA	10703
V&W	303619

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86126

1996 Chrysler Sebring HVAC Heater Hose DY 86126

Dayco HVAC Heater Hose 86126 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1996 Chrysler Sebring Engines.
Engine Sub Model Notes Position
2.5L V6 JX, JXi, LX, LXi Small I.D. Heater Hose Heater Outlet
Part Interchange
ACDelco 16313M
CARQUEST 19089
Chrysler 4662182
Duralast E86126
Gates 19089
NAPA 11089
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L V6	JX, JXi, LX, LXi	Small I.D. Heater Hose	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19094

1996 Chrysler Sebring HVAC Heater Hose ZO 19094

Gates HVAC Heater Hose 19094 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 21.4
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Chrysler Sebring Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 LX Molded Heater Hose Fuel Type: GAS Heater To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	LX	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-2

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86125

1996 Chrysler Sebring HVAC Heater Hose DY 86125

Dayco HVAC Heater Hose 86125 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 19/32
End 2 Inside Diameter : 19/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1996 Chrysler Sebring Engines.
Engine Sub Model Notes Position
2.5L V6 JX, JXi, LX, LXi Small I.D. Heater Hose Heater Inlet
Part Interchange
ACDelco 18236L
CARQUEST 19090
Chrysler 4662181AB
Chrysler 4662181
Duralast E86125
Gates 19090
NAPA 11090
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L V6	JX, JXi, LX, LXi	Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19089

1996 Chrysler Sebring HVAC Heater Hose ZO 19089

Gates HVAC Heater Hose 19089 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 32.7
Inside Diameter 1 : .62
Inside Diameter 2 : .71
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Chrysler Sebring Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 JX, JXi, LX, LXi Molded Heater Hose Fuel Type: GAS - Body Type: Convertible Heater To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	JX, JXi, LX, LXi	Molded Heater Hose	Fuel Type: GAS - Body Type: Convertible	Heater To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 18879

1996 Chrysler Sebring HVAC Heater Hose ZO 18879

Gates HVAC Heater Hose 18879 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 29.3
Inside Diameter 1 : .64
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Chrysler Sebring Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 JX Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	JX	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 19090

1996 Chrysler Sebring HVAC Heater Hose ZO 19090

Gates HVAC Heater Hose 19090 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 33.1
Inside Diameter 1 : .59
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Chrysler Sebring Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 JX, JXi, LX, LXi Molded Heater Hose Fuel Type: GAS - Body Type: Convertible Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	JX, JXi, LX, LXi	Molded Heater Hose	Fuel Type: GAS - Body Type: Convertible	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

1996 Chrysler Sebring HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Pipe-3 To Water Pump, Pipe-4 To Engine, Pipe-4 To Thermostat

Position: Pipe-3 To Water Pump, Pipe-4 To Engine, Pipe-4 To Thermostat

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1996 Chrysler Sebring Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	LX	Cut to Length, 3" - Straight Heater Hose (Standard)	Fuel Type: GAS	Pipe-3 To Water Pump, Pipe-4 To Thermostat
2.4L L4	JX	Cut to Length, 4" - Straight Heater Hose (Standard)	Fuel Type: GAS	Pipe-4 To Engine

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 26241

1996 Chrysler Sebring HVAC Heater Hose ZO 26241

Gates HVAC Heater Hose 26241 - Pipe-3 To Water Pump

Position: Pipe-3 To Water Pump

Description:

Straight Heater Hose Silicone

Part Specifications:

Centerline Length : 25
Centerline Length : 7.62
Centerline Length : 300
Inside Diameter 1 : .625
Working Pressure : 60

Features:

Constructed with silicone rubber. Ideal for extremely high temperature service in radiator, heater and other coolant transfer hose applications. Approved for marine applications.
- Reinforced with tough, high temperature resistant polyester textile cords.
- Exceptionally flexible.
- Highly resistant to weathering, coolant deterioration, ozone and temperature extremes.
- Exceeds SAE 20R3 Class A Tube and Cover.
- Can be used for emission hose applications.
- For proper installation, use Gates PowerGrip(R) SB clamps or Gates silicone hose clamps.
- Temperature Rating: 70 Deg. F to +400 Deg. F ( 57 Deg. C to +204 Deg. C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 3

Condition: New

Fitments
This Part Fits Following 1996 Chrysler Sebring Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 JX Cut to Length, 4" - Straight Heater Hose (Silicone) Fuel Type: GAS Pipe-3 To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	18051L
CARQUEST	18851
Duralast	E87689
Freshstart	4424
Gates	18851
Goodyear	63153
Honda	79725-SE0-000
NAPA	10851
V&W	303689

ACDelco	16313M
CARQUEST	19089
Chrysler	4662182
Duralast	E86126
Gates	19089
NAPA	11089

ACDelco	18236L
CARQUEST	19090
Chrysler	4662181AB
Chrysler	4662181
Duralast	E86125
Gates	19090
NAPA	11090

My Vehicle:

1996 Chrysler Sebring HVAC Heater Hose

Gates HVAC Heater Hose 18709 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18772 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86121 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87689 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87619 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86126 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19094 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86125 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19089 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18879 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19090 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Pipe-3 To Water Pump, Pipe-4 To Engine, Pipe-4 To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 26241 - Pipe-3 To Water Pump

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X