1990 Chrysler Town & Country HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87698

Dayco HVAC Heater Hose 87698 - Auxiliary Heater Pipe-2 To Auxiliary Heater

Position: Auxiliary Heater Pipe-2 To Auxiliary Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 19
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1990 Chrysler Town & Country Engines.
Engine Sub Model Notes Position
3.3L V6 Base Protective Sleeve Req'd. - Small I.D. Heater Hose Auxiliary Heater Pipe-2 To Auxiliary Heater

Engine	Sub Model	Notes	Position
3.3L V6	Base	Protective Sleeve Req'd. - Small I.D. Heater Hose	Auxiliary Heater Pipe-2 To Auxiliary Heater

Part Interchange

ACDelco	18197L
ACDelco	18053L
ACDelco	18250L
CARQUEST	18868
Cummins	303794
Duralast	E87698
Freshstart	4384
Gates	19109
Gates	18868
Gates	19204
General Motors	10253806
General Motors	10400423
General Motors	10293246
General Motors	10429887
General Motors	10262875
General Motors	10416503
General Motors	10283772
Goodyear	63115
NAPA	11109
NAPA	11204
NAPA	10868
V&W	303698
Volvo Cars	30896900/A
Volvo Cars	30896900/B
Volvo Cars	30896900A
Volvo Cars	30896900B

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

1990 Chrysler Town & Country HVAC Heater Hose ZO 28466

Gates HVAC Heater Hose 28466 - Heater To Valve

Position: Heater To Valve

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1990 Chrysler Town & Country Engines.
Engine Sub Model Notes Fit Notes Position
3.3L V6 Base W/A.C.; Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Heater To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.3L V6	Base	W/A.C.; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Valve

Part Name: HVAC Heater HoseBrand: GatesPart#: 28471

1990 Chrysler Town & Country HVAC Heater Hose ZO 28471

Gates HVAC Heater Hose 28471 - Valve To Auxiliary Heater Pipe-1

Position: Valve To Auxiliary Heater Pipe-1

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 40
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 36
Arm Length 2 : 914.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1990 Chrysler Town & Country Engines.
Engine Sub Model Notes Fit Notes Position
3.3L V6 Base 90º Molded Heater Hose Fuel Type: GAS Valve To Auxiliary Heater Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.3L V6	Base	90º Molded Heater Hose	Fuel Type: GAS	Valve To Auxiliary Heater Pipe-1

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80405

1990 Chrysler Town & Country HVAC Heater Hose DY 80405

Dayco HVAC Heater Hose 80405 - Heater Hose

Position: Heater Hose

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 36
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 1990 Chrysler Town & Country Engines.
Engine Sub Model Notes Position
3.3L V6 Base 90? Molded Coolant Hose Heater Hose

Engine	Sub Model	Notes	Position
3.3L V6	Base	90? Molded Coolant Hose	Heater Hose

Part Interchange

ACDelco	16420M
ACDelco	18152L
Atlas	MH-65
CARQUEST	19459
CARQUEST	28471
Chrysler	4462406
Chrysler	5264133
Chrysler	4361127
Chrysler	55037326
Chrysler	4462087
Chrysler	1595160
Duralast	E80405
Ford	F57H-18472-CA
Freshstart	4106
Gates	19459
Gates	28471
General Motors	15545960
General Motors	55036491
Goodyear	63836
Mazda	GK3J-61-24YF
Mazda	GK3J-61-24YG
Mazda	3K3J-61-24YF
Mazda	GK3J-61-24YK
NAPA	9812
NAPA	11459
Pirelli	43836
Toyota	87245-3D490
Toyota	87209-04030

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18868

1990 Chrysler Town & Country HVAC Heater Hose ZO 18868

Gates HVAC Heater Hose 18868 - Auxiliary Heater Pipe-2 To Auxiliary Heater

Position: Auxiliary Heater Pipe-2 To Auxiliary Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 22.5
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1990 Chrysler Town & Country Engines.
Engine Sub Model Notes Fit Notes Position
3.3L V6 Base Protective sleeve required - Molded Heater Hose Fuel Type: GAS Auxiliary Heater Pipe-2 To Auxiliary Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.3L V6	Base	Protective sleeve required - Molded Heater Hose	Fuel Type: GAS	Auxiliary Heater Pipe-2 To Auxiliary Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 18909

1990 Chrysler Town & Country HVAC Heater Hose ZO 18909

Gates HVAC Heater Hose 18909 - Oil Cooler To Water Pump

Position: Oil Cooler To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 38.1
Inside Diameter 1 : .59
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1990 Chrysler Town & Country Engines.
Engine Sub Model Notes Fit Notes Position
3.3L V6 Base Molded Heater Hose Fuel Type: GAS Oil Cooler To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.3L V6	Base	Molded Heater Hose	Fuel Type: GAS	Oil Cooler To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 18915

1990 Chrysler Town & Country HVAC Heater Hose ZO 18915

Gates HVAC Heater Hose 18915 - Heater To Pipe-1, Heater To Tee

Position: Heater To Pipe-1, Heater To Tee

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 40.9
Inside Diameter 1 : .62
Inside Diameter 2 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1990 Chrysler Town & Country Engines.
Engine Sub Model Notes Fit Notes Position
3.3L V6 Base W/Aux. Heater - Molded Heater Hose Fuel Type: GAS Heater To Pipe-1, Heater To Tee
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.3L V6	Base	W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1, Heater To Tee

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

1990 Chrysler Town & Country HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Auxiliary Heater Pipe-1 To Auxiliary Heater, Pipe-1 To Water Pump, Pipe-4 To Water Pump, Tee To Auxiliary Heater Pipe-3, Tee To Pipe-4

Position: Auxiliary Heater Pipe-1 To Auxiliary Heater, Pipe-1 To Water Pump, Pipe-4 To Water Pump, Tee To Auxiliary Heater Pipe-3, Tee To Pipe-4

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1990 Chrysler Town & Country Engines.

Engine	Sub Model	Notes	Fit Notes	Position
3.3L V6	Base	W/Aux. Heater; Cut to Length, 14" - Straight Heater Hose (Standard)	Fuel Type: GAS	Auxiliary Heater Pipe-1 To Auxiliary Heater, Pipe-1 To Water Pump, Pipe-4 To Water Pump, Tee To Auxiliary Heater Pipe-3, Tee To Pipe-4

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

1990 Chrysler Town & Country HVAC Heater Hose

Dayco HVAC Heater Hose 87698 - Auxiliary Heater Pipe-2 To Auxiliary Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28466 - Heater To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28471 - Valve To Auxiliary Heater Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80405 - Heater Hose

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18868 - Auxiliary Heater Pipe-2 To Auxiliary Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18909 - Oil Cooler To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18915 - Heater To Pipe-1, Heater To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Auxiliary Heater Pipe-1 To Auxiliary Heater, Pipe-1 To Water Pump, Pipe-4 To Water Pump, Tee To Auxiliary Heater Pipe-3, Tee To Pipe-4

Description:

Part Specifications:

Features:

Related HVAC Parts

My Vehicle:

1990 Chrysler Town & Country HVAC Heater Hose

Dayco HVAC Heater Hose 87698 - Auxiliary Heater Pipe-2 To Auxiliary Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28466 - Heater To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28471 - Valve To Auxiliary Heater Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80405 - Heater Hose

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18868 - Auxiliary Heater Pipe-2 To Auxiliary Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18909 - Oil Cooler To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18915 - Heater To Pipe-1, Heater To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Auxiliary Heater Pipe-1 To Auxiliary Heater, Pipe-1 To Water Pump, Pipe-4 To Water Pump, Tee To Auxiliary Heater Pipe-3, Tee To Pipe-4

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X