2009 Dodge Ram 2500 Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23958

Gates Radiator Coolant Hose 23958 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 19
Inside Diameter 1 : 1.5
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Dodge Ram 2500 Engines.
Engine Sub Model Notes Fit Notes Position
4.7L V8 ST Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.7L V8	ST	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72357

2009 Dodge Ram 2500 Radiator Coolant Hose DY 72357

Dayco Radiator Coolant Hose 72357 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 21
End 1 Inside Diameter : 1 11/16
End 2 Inside Diameter : 1 15/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2009 Dodge Ram 2500 Engines.
Engine Sub Model Notes Position
5.9L L6 ST Curved Radiator Hose Upper
6.7L L6 Laramie, SLT, ST, SXT Curved Radiator Hose Upper
Part Interchange
ACDelco 26484X
CARQUEST 22892
Chrysler 52028872AF
Chrysler 52028872AE
Chrysler 52028872AD
Duralast E72357
Freshstart 62699
Gates 22892
Goodyear 62699
NAPA 9527
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.9L L6	ST	Curved Radiator Hose	Upper
6.7L L6	Laramie, SLT, ST, SXT	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23959

2009 Dodge Ram 2500 Radiator Coolant Hose ZO 23959

Gates Radiator Coolant Hose 23959 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 15.29
Inside Diameter 1 : 1.75
Inside Diameter 2 : 1.80
Contains Spring : Yes
Number of Branches : 0

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Dodge Ram 2500 Engines.
Engine Sub Model Notes Fit Notes Position
4.7L V8 ST Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.7L V8	ST	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72241

2009 Dodge Ram 2500 Radiator Coolant Hose DY 72241

Dayco Radiator Coolant Hose 72241 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 13
End 1 Inside Diameter : 1 15/16
End 2 Inside Diameter : 2
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2009 Dodge Ram 2500 Engines.
Engine Sub Model Notes Position
5.9L L6 ST Curved Radiator Hose Lower
6.7L L6 Laramie, SLT, ST, SXT Curved Radiator Hose Lower
Part Interchange
ACDelco 22503M
CARQUEST 22893
Chrysler 55056945AC
Chrysler 55056945AD
Chrysler 55056945AB
Chrysler 55056945AA
Duralast D72241
Gates 22893
Goodyear 62700
NAPA 9528
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.9L L6	ST	Curved Radiator Hose	Lower
6.7L L6	Laramie, SLT, ST, SXT	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22892

2009 Dodge Ram 2500 Radiator Coolant Hose ZO 22892

Gates Radiator Coolant Hose 22892 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 24.5
Inside Diameter 1 : 1.75
Inside Diameter 2 : 2
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Dodge Ram 2500 Engines.
Engine Sub Model Notes Fit Notes Position
5.9L L6 ST Molded Coolant Hose Fuel Type: DIESEL Upper
6.7L L6 Laramie, SLT, ST, SXT Molded Coolant Hose Fuel Type: DIESEL Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.9L L6	ST	Molded Coolant Hose	Fuel Type: DIESEL	Upper
6.7L L6	Laramie, SLT, ST, SXT	Molded Coolant Hose	Fuel Type: DIESEL	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23068

2009 Dodge Ram 2500 Radiator Coolant Hose ZO 23068

Gates Radiator Coolant Hose 23068 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 21
Inside Diameter 1 : 1.75
Inside Diameter 2 : 2
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Dodge Ram 2500 Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Crew, Laramie, Power Wagon, SLT, ST, SXT VIN 11th Digit G - Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Crew, Laramie, Power Wagon, SLT, ST, SXT	VIN 11th Digit G - Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22893

2009 Dodge Ram 2500 Radiator Coolant Hose ZO 22893

Gates Radiator Coolant Hose 22893 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 15.1
Inside Diameter 1 : 2
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Dodge Ram 2500 Engines.
Engine Sub Model Notes Fit Notes Position
5.9L L6 ST Molded Coolant Hose Fuel Type: DIESEL Lower
6.7L L6 Laramie, SLT, ST, SXT Molded Coolant Hose Fuel Type: DIESEL Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.9L L6	ST	Molded Coolant Hose	Fuel Type: DIESEL	Lower
6.7L L6	Laramie, SLT, ST, SXT	Molded Coolant Hose	Fuel Type: DIESEL	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23604

2009 Dodge Ram 2500 Radiator Coolant Hose ZO 23604

Gates Radiator Coolant Hose 23604 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 18.3
Inside Diameter 1 : 1.75
Inside Diameter 2 : 2
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Dodge Ram 2500 Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Crew, Laramie, Power Wagon, SLT, ST, SXT VIN 11th Digit J, S - Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Crew, Laramie, Power Wagon, SLT, ST, SXT	VIN 11th Digit J, S - Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23605

2009 Dodge Ram 2500 Radiator Coolant Hose ZO 23605

Gates Radiator Coolant Hose 23605 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 47.2
Inside Diameter 1 : 1.5
Inside Diameter 2 : 1.75
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Dodge Ram 2500 Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Crew, Laramie, Power Wagon, SLT, ST, SXT VIN 11th Digit J, S - Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Crew, Laramie, Power Wagon, SLT, ST, SXT	VIN 11th Digit J, S - Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24472

2009 Dodge Ram 2500 Radiator Coolant Hose ZO 24472

Gates Radiator Coolant Hose 24472 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 32.44
Inside Diameter 1 : 1.46
Inside Diameter 2 : 1.75
Number of Branches : 0

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Dodge Ram 2500 Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Crew, Laramie, Power Wagon, SLT, ST, SXT VIN 11th Digit G - Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	26484X
CARQUEST	22892
Chrysler	52028872AF
Chrysler	52028872AE
Chrysler	52028872AD
Duralast	E72357
Freshstart	62699
Gates	22892
Goodyear	62699
NAPA	9527

ACDelco	22503M
CARQUEST	22893
Chrysler	55056945AC
Chrysler	55056945AD
Chrysler	55056945AB
Chrysler	55056945AA
Duralast	D72241
Gates	22893
Goodyear	62700
NAPA	9528

My Vehicle:

2009 Dodge Ram 2500 Radiator Coolant Hose

Gates Radiator Coolant Hose 23958 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72357 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23959 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72241 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22892 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23068 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22893 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23604 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23605 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24472 - Upper

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X