2005 Dodge Ram 3500 HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80401

Dayco HVAC Heater Hose 80401 - Pipe To Heater, Heater Outlet

Position: Pipe To Heater, Heater Outlet

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2005 Dodge Ram 3500 Engines.
Engine Sub Model Notes Position
5.9L L6 Laramie, SLT, ST 90? Molded Coolant Hose Pipe To Heater, Heater Outlet

Engine	Sub Model	Notes	Position
5.9L L6	Laramie, SLT, ST	90? Molded Coolant Hose	Pipe To Heater, Heater Outlet

Part Interchange

ACDelco	14494S
ACDelco	16382M
ACDelco	16328M
ACDelco	16198M
ACDelco	18060L
Atlas	MH-61
CARQUEST	28467
CARQUEST	19498
CARQUEST	19377
CARQUEST	19290
CARQUEST	18888
Chrysler	4677422
Chrysler	55056673AC
Chrysler	MR439546
Chrysler	55037607AB
Chrysler	55037607AC
Chrysler	55036415
Chrysler	5058859AC
Chrysler	55036777
Duralast	D80401
Ford	1R3H-18K579-CB
Ford	1L5H-18472-FA
Ford	1R3Z-18472-CA
Ford	YR3H-18K580-AA
Ford	1R3H-18K579-CE
Ford	E9SE-8597-BE
Ford	F6ZZ-18472-CC
Ford	F77A-18472-A
Ford	F77Z-18472-A
Ford	F77H-18D334-BC
Ford	F77Z-18472-BA
Ford	F6ZH-18K580-AF
Ford	F77A-18472-BB
Ford	E9SZ-8597-A
Ford	F7DH-18K579-BA
Ford	E9SZ-8597-B
Ford	XF1H-18K579-B
Freshstart	4102
Gates	19498
Gates	19290
Gates	18888
Gates	28467
Gates	19377
General Motors	10284269
General Motors	22712142
General Motors	1641237
General Motors	14100798
General Motors	10284268
General Motors	55036942
General Motors	10007473
General Motors	22551240
General Motors	10145102
Goodyear	63812
Goodyear	64323
Honda	19504-RAA-A00
Kia	0K30E-61-212A
Mazda	NC10-61-212
Mitsubishi	MR296878
Motorcraft	KH57
Motorcraft	KM1747
NAPA	10888
NAPA	11290
NAPA	11498
NAPA	9808
NAPA	11377
Pirelli	43812
Suzuki	17856-86Z00
Toyota	87245-1B251
Toyota	87245-2D550
Toyota	87245-3A820
Volvo Cars	9485591
White	33-0135712

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19213

2005 Dodge Ram 3500 HVAC Heater Hose ZO 19213

Gates HVAC Heater Hose 19213 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10.9
Inside Diameter 1 : .61
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Dodge Ram 3500 Engines.
Engine Sub Model Notes Fit Notes Position
5.9L L6 Laramie, SLT, ST Molded Heater Hose Fuel Type: DIESEL Heater To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.9L L6	Laramie, SLT, ST	Molded Heater Hose	Fuel Type: DIESEL	Heater To Pipe-2

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80403

2005 Dodge Ram 3500 HVAC Heater Hose DY 80403

Dayco HVAC Heater Hose 80403 - Connector To Engine

Position: Connector To Engine

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2005 Dodge Ram 3500 Engines.
Engine Sub Model Notes Position
5.7L V8 Laramie, SLT, ST Cut to Fit - Driver Side - 90? Molded Coolant Hose Connector To Engine

Engine	Sub Model	Notes	Position
5.7L V8	Laramie, SLT, ST	Cut to Fit - Driver Side - 90? Molded Coolant Hose	Connector To Engine

Part Interchange

ACDelco	18150L
ACDelco	26667X
CARQUEST	28469
Duralast	E80403
Ford	F57H-18D334-CA
Freshstart	4107
Gates	23570
Gates	28469
General Motors	14076098
General Motors	10387758
General Motors	15032160
Goodyear	63819
Honda	79721-S02-A00
Honda	19504-PPA-A00
Kia	0K30E-61-211D
Kia	0K30E-61-211C
NAPA	9810
NAPA	16285
Pirelli	43819
Toyota	87245-42190

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87887

2005 Dodge Ram 3500 HVAC Heater Hose DY 87887

Dayco HVAC Heater Hose 87887 - Pipe to Engine (Inlet)

Position: Pipe to Engine (Inlet)

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 14 1/2
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 31/32
End 2 Inside Diameter : 5/8
End 2 Outside Diameter : 31/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2005 Dodge Ram 3500 Engines.
Engine Sub Model Notes Position
5.9L L6 Laramie, SLT, ST Small I.D. Heater Hose Pipe to Engine (Inlet)
Part Interchange
ACDelco 18223L
ACDelco 18178L
CARQUEST 19168
CARQUEST 19125
Duralast E87887
Ford F58Z-18472-Q
Ford F58H-18C266-BB
Gates 19168
Gates 19125
NAPA 11168
NAPA 11125
Toyota 87245-0C010
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.9L L6	Laramie, SLT, ST	Small I.D. Heater Hose	Pipe to Engine (Inlet)

Part Name: HVAC Heater HoseBrand: GatesPart#: 28469

2005 Dodge Ram 3500 HVAC Heater Hose ZO 28469

Gates HVAC Heater Hose 28469 - Connector To Engine, Engine To Connector

Position: Connector To Engine, Engine To Connector

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 26
Arm Length 1 : 8
Arm Length 1 : 203.2
Arm Length 2 : 18
Arm Length 2 : 457.2
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2005 Dodge Ram 3500 Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Laramie, SLT, ST Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Connector To Engine, Engine To Connector
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Laramie, SLT, ST	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Connector To Engine, Engine To Connector

Part Name: HVAC Heater HoseBrand: GatesPart#: 19168

2005 Dodge Ram 3500 HVAC Heater Hose ZO 19168

Gates HVAC Heater Hose 19168 - Pipe-1 To Heater

Position: Pipe-1 To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 19.7
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Dodge Ram 3500 Engines.
Engine Sub Model Notes Fit Notes Position
5.9L L6 Laramie, SLT, ST Cut to fit - Molded Heater Hose Fuel Type: DIESEL Pipe-1 To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.9L L6	Laramie, SLT, ST	Cut to fit - Molded Heater Hose	Fuel Type: DIESEL	Pipe-1 To Heater

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87684

2005 Dodge Ram 3500 HVAC Heater Hose DY 87684

Dayco HVAC Heater Hose 87684 - Heater To Connector

Position: Heater To Connector

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 19
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2005 Dodge Ram 3500 Engines.
Engine Sub Model Notes Position
5.7L V8 Laramie, SLT, ST Cut to Fit - Top Hose - Small I.D. Heater Hose Heater To Connector

Engine	Sub Model	Notes	Position
5.7L V8	Laramie, SLT, ST	Cut to Fit - Top Hose - Small I.D. Heater Hose	Heater To Connector

Part Interchange

ACDelco	18104L
ACDelco	18045L
ACDelco	18409L
CARQUEST	18840
CARQUEST	19575
CARQUEST	19045
Chrysler	55057236AC
Duralast	E87684
Freshstart	4448
Gates	19516
Gates	19575
Gates	19045
Gates	18840
Goodyear	63175
Honda	79725S84A00
Honda	79721-TA0-A01
Mazda	ZZL015184
NAPA	11045
NAPA	11575
NAPA	11516
NAPA	10840
NAPA	18390L
V&W	303684

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87925

2005 Dodge Ram 3500 HVAC Heater Hose DY 87925

Dayco HVAC Heater Hose 87925 - Connector To Engine

Position: Connector To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 10 3/4
End 1 Inside Diameter : 21/32
End 2 Inside Diameter : 21/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2005 Dodge Ram 3500 Engines.
Engine Sub Model Notes Position
5.7L V8 Laramie, SLT, ST Passenger Side - Small I.D. Heater Hose Connector To Engine
Part Interchange
ACDelco 14445S
CARQUEST 19394
Duralast C87925
Gates 19394
Honda 87245-47230
NAPA 11394
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.7L V8	Laramie, SLT, ST	Passenger Side - Small I.D. Heater Hose	Connector To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19516

2005 Dodge Ram 3500 HVAC Heater Hose ZO 19516

Gates HVAC Heater Hose 19516 - Connector To Heater, Heater To Connector

Position: Connector To Heater, Heater To Connector

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 30.1
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Dodge Ram 3500 Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Laramie, SLT, ST Cut to fit - Molded Heater Hose Fuel Type: GAS Connector To Heater, Heater To Connector
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2005 Dodge Ram 3500 HVAC Heater Hose

Dayco HVAC Heater Hose 80401 - Pipe To Heater, Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19213 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80403 - Connector To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87887 - Pipe to Engine (Inlet)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28469 - Connector To Engine, Engine To Connector

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19168 - Pipe-1 To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87684 - Heater To Connector

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87925 - Connector To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19516 - Connector To Heater, Heater To Connector

Description:

Part Specifications:

Features:

Related HVAC Parts

ACDelco	18223L
ACDelco	18178L
CARQUEST	19168
CARQUEST	19125
Duralast	E87887
Ford	F58Z-18472-Q
Ford	F58H-18C266-BB
Gates	19168
Gates	19125
NAPA	11168
NAPA	11125
Toyota	87245-0C010

ACDelco	14445S
CARQUEST	19394
Duralast	C87925
Gates	19394
Honda	87245-47230
NAPA	11394

My Vehicle:

2005 Dodge Ram 3500 HVAC Heater Hose

Dayco HVAC Heater Hose 80401 - Pipe To Heater, Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19213 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80403 - Connector To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87887 - Pipe to Engine (Inlet)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28469 - Connector To Engine, Engine To Connector

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19168 - Pipe-1 To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87684 - Heater To Connector

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87925 - Connector To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19516 - Connector To Heater, Heater To Connector

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X