Home

1989 Ford Country Squire

My Vehicle:

1989 Ford Country Squire HVAC Heater Hose

We have found 8 HVAC Heater Hose for

1989 Ford Country Squire

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88434

Dayco HVAC Heater Hose 88434 - Valve To Engine

Position: Valve To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 14
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 1989 Ford Country Squire Engines.
Engine Sub Model Notes Position
5.0L V8 LX, Base w/Auto Temp. Control - Small I.D. Heater Hose Valve To Engine
Part Interchange
ACDelco 16176M
ACDelco 16681M
CARQUEST 19683
Datsun/Nissan 92410-EY00A
Duralast E88434
Gates 19683
Gates 12092
Goodyear 63985
NAPA 13092
NAPA 11683
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.0L V8	LX, Base	w/Auto Temp. Control - Small I.D. Heater Hose	Valve To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88357

1989 Ford Country Squire HVAC Heater Hose DY 88357

Dayco HVAC Heater Hose 88357 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 13
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1989 Ford Country Squire Engines.
Engine Sub Model Notes Position
5.0L V8 Base, LX w/Auto Temp. Control - Small I.D. Heater Hose Heater To Pipe
Part Interchange
ACDelco 16146M
CARQUEST 19610
Chrysler 4767172AG
Duralast D88357
Freshstart 4341
Gates 19610
General Motors 1629223
Goodyear 63077
Goodyear 64320
NAPA 11610
V&W 304357
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.0L V8	Base, LX	w/Auto Temp. Control - Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87628

1989 Ford Country Squire HVAC Heater Hose DY 87628

Dayco HVAC Heater Hose 87628 - Pipe To Water Pump

Position: Pipe To Water Pump

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1989 Ford Country Squire Engines.
Engine Sub Model Notes Position
5.0L V8 Base, LX Small I.D. Heater Hose Pipe To Water Pump
Part Interchange
ACDelco 14086S
CARQUEST 18741
Duralast B87628
Ford E7AZ-18472-E
Freshstart 4517
Gates 18741
Goodyear 63244
Kia 97312-3M000
NAPA 10741
V&W 303628
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.0L V8	Base, LX	Small I.D. Heater Hose	Pipe To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 19610

1989 Ford Country Squire HVAC Heater Hose ZO 19610

Gates HVAC Heater Hose 19610 - Heater To Valve

Position: Heater To Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.6
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1989 Ford Country Squire Engines.
Engine Sub Model Notes Fit Notes Position
5.0L V8 Base, LX W/Auto. Temp. Control; Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Base, LX	W/Auto. Temp. Control; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Valve

Part Name: HVAC Heater HoseBrand: GatesPart#: 18741

1989 Ford Country Squire HVAC Heater Hose ZO 18741

Gates HVAC Heater Hose 18741 - Pipe To Water Pump

Position: Pipe To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.2
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1989 Ford Country Squire Engines.
Engine Sub Model Notes Fit Notes Position
5.0L V8 Base, LX Molded Heater Hose Fuel Type: GAS Pipe To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Base, LX	Molded Heater Hose	Fuel Type: GAS	Pipe To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 18708

1989 Ford Country Squire HVAC Heater Hose ZO 18708

Gates HVAC Heater Hose 18708 - Heater To Pipe, Heater To Pipe-1

Position: Heater To Pipe, Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.6
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1989 Ford Country Squire Engines.
Engine Sub Model Notes Fit Notes Position
5.0L V8 Base, LX Molded Heater Hose Fuel Type: GAS Heater To Pipe, Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Base, LX	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe, Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19683

1989 Ford Country Squire HVAC Heater Hose ZO 19683

Gates HVAC Heater Hose 19683 - Valve To Engine

Position: Valve To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 16.4
Inside Diameter 1 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1989 Ford Country Squire Engines.
Engine Sub Model Notes Fit Notes Position
5.0L V8 Base, LX W/Auto. Temp. Control - Molded Heater Hose Fuel Type: GAS Valve To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Base, LX	W/Auto. Temp. Control - Molded Heater Hose	Fuel Type: GAS	Valve To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88351

1989 Ford Country Squire HVAC Heater Hose DY 88351

Dayco HVAC Heater Hose 88351 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1989 Ford Country Squire Engines.
Engine Sub Model Notes Position
5.0L V8 LX, Base w/A.C., w/o Auto Temp. Control - Small I.D. Heater Hose Heater To Pipe

Engine	Sub Model	Notes	Position
5.0L V8	LX, Base	w/A.C., w/o Auto Temp. Control - Small I.D. Heater Hose	Heater To Pipe

Part Interchange

ACDelco	18117L
Acura	19504-RWC-A00
CARQUEST	19602
Duralast	E88351
Freshstart	63242
Gates	19602
General Motors	15802561
General Motors	22731266
General Motors	22682506
General Motors	14101516
General Motors	10069157
General Motors	10021320
Goodyear	63242
NAPA	11602
Saturn	22712141
Saturn	15247033
V&W	304351

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	16176M
ACDelco	16681M
CARQUEST	19683
Datsun/Nissan	92410-EY00A
Duralast	E88434
Gates	19683
Gates	12092
Goodyear	63985
NAPA	13092
NAPA	11683

ACDelco	16146M
CARQUEST	19610
Chrysler	4767172AG
Duralast	D88357
Freshstart	4341
Gates	19610
General Motors	1629223
Goodyear	63077
Goodyear	64320
NAPA	11610
V&W	304357

ACDelco	14086S
CARQUEST	18741
Duralast	B87628
Ford	E7AZ-18472-E
Freshstart	4517
Gates	18741
Goodyear	63244
Kia	97312-3M000
NAPA	10741
V&W	303628

My Vehicle:

1989 Ford Country Squire HVAC Heater Hose

Dayco HVAC Heater Hose 88434 - Valve To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88357 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87628 - Pipe To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19610 - Heater To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18741 - Pipe To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18708 - Heater To Pipe, Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19683 - Valve To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88351 - Heater To Pipe

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X