Home

2007 Ford Crown Victoria

My Vehicle:

2007 Ford Crown Victoria HVAC Heater Hose

We have found 4 HVAC Heater Hose for

2007 Ford Crown Victoria

Part Name: HVAC Heater HoseBrand: GatesPart#: 19632

Gates HVAC Heater Hose 19632 - Heater Inlet

Position: Heater Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 21.7
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2007 Ford Crown Victoria Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 Base, LX, Police Interceptor Molded Heater Hose Fuel Type: FLEX, GAS Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	Base, LX, Police Interceptor	Molded Heater Hose	Fuel Type: FLEX, GAS	Heater Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88442

2007 Ford Crown Victoria HVAC Heater Hose DY 88442

Dayco HVAC Heater Hose 88442 - Intake Manifold To Heater

Position: Intake Manifold To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 9
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2007 Ford Crown Victoria Engines.
Engine Sub Model Notes Position
4.6L V8 Base, LX, Police Interceptor Small I.D. Heater Hose Intake Manifold To Heater
Part Interchange
ACDelco 14269S
CARQUEST 19764
Duralast C88442
Ford 5W73-18K579-AA
Ford 3W7Z-18472-AE
Ford 3W7H-18K579-AB
Gates 19764
Motorcraft KH275
NAPA 11764
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.6L V8	Base, LX, Police Interceptor	Small I.D. Heater Hose	Intake Manifold To Heater

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87918

2007 Ford Crown Victoria HVAC Heater Hose DY 87918

Dayco HVAC Heater Hose 87918 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 8
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 15/16
End 2 Inside Diameter : 3/4
End 2 Outside Diameter : 1 1/16
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2007 Ford Crown Victoria Engines.
Engine Sub Model Notes Position
4.6L V8 Base, LX, Police Interceptor Small I.D. Heater Hose Heater To Pipe
Part Interchange
Duralast B87918
Ford 4W7Z-18472-AA
Ford 4W73-18K580-AA
Motorcraft KH361
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.6L V8	Base, LX, Police Interceptor	Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19764

2007 Ford Crown Victoria HVAC Heater Hose ZO 19764

Gates HVAC Heater Hose 19764 - Heater Outlet

Position: Heater Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 14.4
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2007 Ford Crown Victoria Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 Base, LX, Police Interceptor Molded Heater Hose Fuel Type: FLEX, GAS Heater Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14269S
CARQUEST	19764
Duralast	C88442
Ford	5W73-18K579-AA
Ford	3W7Z-18472-AE
Ford	3W7H-18K579-AB
Gates	19764
Motorcraft	KH275
NAPA	11764

Duralast	B87918
Ford	4W7Z-18472-AA
Ford	4W73-18K580-AA
Motorcraft	KH361

My Vehicle:

2007 Ford Crown Victoria HVAC Heater Hose

Gates HVAC Heater Hose 19632 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88442 - Intake Manifold To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87918 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19764 - Heater Outlet

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X