1992 Ford E-150 Econoline HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87614

Dayco HVAC Heater Hose 87614 - Pipe To Engine, Heater To Engine

Position: Pipe To Engine, Heater To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1992 Ford E-150 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
4.9L L6 Base, XL w/o Aux. Heater - Small I.D. Heater Hose Transmission Speeds: 4 Pipe To Engine, Heater To Engine

Engine	Sub Model	Notes	Fit Notes	Position
4.9L L6	Base, XL	w/o Aux. Heater - Small I.D. Heater Hose	Transmission Speeds: 4	Pipe To Engine, Heater To Engine

Part Interchange

ACDelco	18008L
ACDelco	16354M
ACDelco	16276M
CARQUEST	18082
CARQUEST	18450
Duralast	E87614
Ford	F8RZ-18472-HA
Ford	98BB-18K582-HB
Ford	F8RZ-18472-AA
Freshstart	4365
Gates	19343
Gates	23335
Gates	18082
Gates	18450
General Motors	89023413
General Motors	90573890
General Motors	96539582
General Motors	19129959
General Motors	15187987
General Motors	22704431
Goodyear	63102
NAPA	11343
NAPA	10450
NAPA	10082
NAPA	16073
V&W	303614

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87000

1992 Ford E-150 Econoline HVAC Heater Hose DY 87000

Dayco HVAC Heater Hose 87000 - Intake Manifold To Heater

Position: Intake Manifold To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 9 1/4
End 1 Inside Diameter : 3/8
End 2 Inside Diameter : 3/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1992 Ford E-150 Econoline Engines.
Engine Sub Model Notes Position
5.0L V8 Base, XL Small I.D. Heater Hose Intake Manifold To Heater
5.8L V8 Base, XL Small I.D. Heater Hose Intake Manifold To Heater

Engine	Sub Model	Notes	Position
5.0L V8	Base, XL	Small I.D. Heater Hose	Intake Manifold To Heater
5.8L V8	Base, XL	Small I.D. Heater Hose	Intake Manifold To Heater

Part Interchange

ACDelco	14002S
CARQUEST	18030
Datsun/Nissan	14056-V5022
Datsun/Nissan	14056-19P00
Datsun/Nissan	14056-32F12
Datsun/Nissan	14055-69A06
Datsun/Nissan	14055-96A06
Duralast	B87000
Gates	18030
Goodyear	64309
NAPA	10030
Toyota	16281-42020
Toyota	16284-88381
Toyota	16285-42010
V&W	303000

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18082

1992 Ford E-150 Econoline HVAC Heater Hose ZO 18082

Gates HVAC Heater Hose 18082 - Heater To Thermostat

Position: Heater To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 18
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Ford E-150 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
4.9L L6 Base, XL W/O Aux. Heater; Cut to fit - Molded Heater Hose Transmission Speeds: 3 - Fuel Type: GAS - Transmission Control Type: Automatic Heater To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.9L L6	Base, XL	W/O Aux. Heater; Cut to fit - Molded Heater Hose	Transmission Speeds: 3 - Fuel Type: GAS - Transmission Control Type: Automatic	Heater To Thermostat

Part Name: HVAC Heater HoseBrand: GatesPart#: 28467

1992 Ford E-150 Econoline HVAC Heater Hose ZO 28467

Gates HVAC Heater Hose 28467 - Heater To Tee-1, Heater To Tee-2

Position: Heater To Tee-1, Heater To Tee-2

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 16
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 12
Arm Length 2 : 304.8
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Ford E-150 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
4.9L L6 Base, XL W/Aux. Heater; Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Heater To Tee-1, Heater To Tee-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.9L L6	Base, XL	W/Aux. Heater; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Tee-1, Heater To Tee-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 18030

1992 Ford E-150 Econoline HVAC Heater Hose ZO 18030

Gates HVAC Heater Hose 18030 - Heater To Intake Manifold, Tee To Intake Manifold

Position: Heater To Intake Manifold, Tee To Intake Manifold

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .38
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1992 Ford E-150 Econoline Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Base, XL	W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Intake Manifold, Tee To Intake Manifold
5.8L V8	Base, XL	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Intake Manifold

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18830

1992 Ford E-150 Econoline HVAC Heater Hose ZO 18830

Gates HVAC Heater Hose 18830 - Tee To Water Pump

Position: Tee To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.7
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Ford E-150 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
5.8L V8 Base, XL W/Aux. Heater - Molded Heater Hose Fuel Type: GAS Tee To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.8L V8	Base, XL	W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Tee To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 18821

1992 Ford E-150 Econoline HVAC Heater Hose ZO 18821

Gates HVAC Heater Hose 18821 - Heater To Engine, Heater To Water Pump

Position: Heater To Engine, Heater To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10.8
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Ford E-150 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
5.0L V8 Base, XL W/Aux. Heater; W/A.C. - Molded Heater Hose Fuel Type: GAS Heater To Engine, Heater To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Base, XL	W/Aux. Heater; W/A.C. - Molded Heater Hose	Fuel Type: GAS	Heater To Engine, Heater To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 18769

1992 Ford E-150 Econoline HVAC Heater Hose ZO 18769

Gates HVAC Heater Hose 18769 - Heater To Tee

Position: Heater To Tee

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 14.3
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Ford E-150 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
5.0L V8 Base, XL W/O Aux. Heater - Molded Heater Hose Transmission Speeds: 4 - Fuel Type: GAS - Transmission Control Type: Automatic Heater To Tee
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Base, XL	W/O Aux. Heater - Molded Heater Hose	Transmission Speeds: 4 - Fuel Type: GAS - Transmission Control Type: Automatic	Heater To Tee

Part Name: HVAC Heater HoseBrand: GatesPart#: 18020

1992 Ford E-150 Econoline HVAC Heater Hose ZO 18020

Gates HVAC Heater Hose 18020 - Tee To Intake Manifold

Position: Tee To Intake Manifold

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1992 Ford E-150 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
5.8L V8 Base, XL W/O Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Tee To Intake Manifold
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.8L V8	Base, XL	W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Tee To Intake Manifold

Part Name: HVAC Heater HoseBrand: GatesPart#: 18799

1992 Ford E-150 Econoline HVAC Heater Hose ZO 18799

Gates HVAC Heater Hose 18799 - Tee To Water Pump

Position: Tee To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.1
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Ford E-150 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
5.0L V8 Base, XL W/Calif. Emission System - Molded Heater Hose Fuel Type: GAS Tee To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Base, XL	W/Calif. Emission System - Molded Heater Hose	Fuel Type: GAS	Tee To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 18786

1992 Ford E-150 Econoline HVAC Heater Hose ZO 18786

Gates HVAC Heater Hose 18786 - Tee To Thermostat, Tee-3 To Thermostat

Position: Tee To Thermostat, Tee-3 To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 17.7
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1992 Ford E-150 Econoline Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.9L L6	Base, XL	W/Aux. Heater; W/A.C.; Cut to fit - Molded Heater Hose	Transmission Speeds: 4 - Fuel Type: GAS - Transmission Control Type: Automatic	Tee To Thermostat, Tee-3 To Thermostat

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18703

1992 Ford E-150 Econoline HVAC Heater Hose ZO 18703

Gates HVAC Heater Hose 18703 - Tee To Water Pump

Position: Tee To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 19.6
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1992 Ford E-150 Econoline Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Base, XL	W/O Aux. Heater; Protective sleeve required; Cut to fit - Molded Heater Hose	Transmission Speeds: 4 - Fuel Type: GAS - Transmission Control Type: Automatic	Tee To Water Pump
5.8L V8	Base, XL	W/O Aux. Heater; Protective sleeve required; Cut to fit - Molded Heater Hose	Transmission Speeds: 4 - Fuel Type: GAS - Transmission Control Type: Automatic	Tee To Water Pump

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

1992 Ford E-150 Econoline HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Pipe-2 To Thermostat

Position: Pipe-2 To Thermostat

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1992 Ford E-150 Econoline Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Base, XL	Cut to Length, 8" - Straight Heater Hose (Standard)	Fuel Type: GAS	Pipe-2 To Thermostat
5.8L V8	Base, XL	Cut to Length, 8" - Straight Heater Hose (Standard)	Fuel Type: GAS	Pipe-2 To Thermostat

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

1992 Ford E-150 Econoline HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Auxiliary Heater Pipe To Auxiliary Heater, Heater To Tee, Pipe To Auxiliary Heater Pipe, Heater To Water Pump, Tee To Thermostat, Tee-1 To Tee-3, Tee-2 To Water Pump

Position: Auxiliary Heater Pipe To Auxiliary Heater, Heater To Tee, Pipe To Auxiliary Heater Pipe, Heater To Water Pump, Tee To Thermostat, Tee-1 To Tee-3, Tee-2 To Water Pump

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1992 Ford E-150 Econoline Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.9L L6	Base, XL	W/Aux. Heater; Cut to Length, 19" - Straight Heater Hose (Standard)	Fuel Type: GAS	Auxiliary Heater Pipe To Auxiliary Heater, Heater To Tee, Pipe To Auxiliary Heater Pipe, Heater To Water Pump, Tee To Thermostat, Tee-1 To Tee-3, Tee-2 To Water Pump
5.8L V8	Base, XL	W/Aux. Heater; Cut to Length, 17" - Straight Heater Hose (Standard)	Fuel Type: GAS	Heater To Tee, Heater To Water Pump

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28410

1992 Ford E-150 Econoline HVAC Heater Hose ZO 28410

Gates HVAC Heater Hose 28410 - Pipe-2 To Pipe-3

Position: Pipe-2 To Pipe-3

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .5
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1992 Ford E-150 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
4.9L L6 Base, XL Cut to Length, 24" - Straight Heater Hose (Standard) Transmission Speeds: 4 - Fuel Type: GAS - Transmission Control Type: Automatic Pipe-2 To Pipe-3
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

1992 Ford E-150 Econoline HVAC Heater Hose

Dayco HVAC Heater Hose 87614 - Pipe To Engine, Heater To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87000 - Intake Manifold To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18082 - Heater To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28467 - Heater To Tee-1, Heater To Tee-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18030 - Heater To Intake Manifold, Tee To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18830 - Tee To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18821 - Heater To Engine, Heater To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18769 - Heater To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18020 - Tee To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18799 - Tee To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18786 - Tee To Thermostat, Tee-3 To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18703 - Tee To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Pipe-2 To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Auxiliary Heater Pipe To Auxiliary Heater, Heater To Tee, Pipe To Auxiliary Heater Pipe, Heater To Water Pump, Tee To Thermostat, Tee-1 To Tee-3, Tee-2 To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28410 - Pipe-2 To Pipe-3

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X