1991 Ford E-250 Econoline HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87605

Dayco HVAC Heater Hose 87605 - Pipe To Thermostat

Position: Pipe To Thermostat

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 20
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1991 Ford E-250 Econoline Engines.
Engine Sub Model Notes Position
4.9L L6 Custom, XL Small I.D. Heater Hose Pipe To Thermostat
5.0L V8 Custom, XL Small I.D. Heater Hose Pipe To Thermostat
5.8L V8 Custom, XL Small I.D. Heater Hose Pipe To Thermostat

Engine	Sub Model	Notes	Position
4.9L L6	Custom, XL	Small I.D. Heater Hose	Pipe To Thermostat
5.0L V8	Custom, XL	Small I.D. Heater Hose	Pipe To Thermostat
5.8L V8	Custom, XL	Small I.D. Heater Hose	Pipe To Thermostat

Part Interchange

ACDelco	18001L
CARQUEST	18072
Chrysler	04809438AD
Cummins	303702
Duralast	E87605
Ford	F87H-18D334-CA
Ford	F87H-18D334-EA
Ford	F87Z-18472-CB
Ford	XL5H-18D334-AA
Freshstart	4373
Gates	18072
Goodyear	63109
Honda	79725-S6M-A00
NAPA	10072
V&W	303605

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87675

1991 Ford E-250 Econoline HVAC Heater Hose DY 87675

Dayco HVAC Heater Hose 87675 - Heater To Water Pump, Heater To Engine

Position: Heater To Water Pump, Heater To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1991 Ford E-250 Econoline Engines.
Engine Sub Model Notes Position
5.0L V8 Custom, XL w/A.C. - Small I.D. Heater Hose Heater To Water Pump, Heater To Engine

Engine	Sub Model	Notes	Position
5.0L V8	Custom, XL	w/A.C. - Small I.D. Heater Hose	Heater To Water Pump, Heater To Engine

Part Interchange

ACDelco	14245S
ACDelco	14122S
CARQUEST	19183
CARQUEST	18821
Chrysler	05005373AB
Chrysler	05005373AC
Chrysler	04596703AB
Duralast	C87675
Ford	F77Z-18472-KB
Ford	1R3H-18K580-C
Freshstart	4395
Gates	19183
Gates	18821
General Motors	10135306
General Motors	25525788
Goodyear	63124
NAPA	10821
NAPA	11183
Toyota	97209-0R040
Toyota	87245-42420
V&W	303675

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87604

1991 Ford E-250 Econoline HVAC Heater Hose DY 87604

Dayco HVAC Heater Hose 87604 - Pipe To Engine

Position: Pipe To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 13
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1991 Ford E-250 Econoline Engines.
Engine Sub Model Notes Position
4.9L L6 Custom, XL Small I.D. Heater Hose Pipe To Engine

Engine	Sub Model	Notes	Position
4.9L L6	Custom, XL	Small I.D. Heater Hose	Pipe To Engine

Part Interchange

ACDelco	16004M
CARQUEST	18071
Duralast	D87604
Ford	F5VH-18C266-AA
Ford	YF1Z-18472-AA
Ford	3W7H-18K580-BA
Ford	XF1H-18K579-AA
Ford	F1OY-18472-C
Ford	F1OY-18472-D
Freshstart	4332
Gates	18071
General Motors	25856148
General Motors	10288179
General Motors	15776141
General Motors	22682485
General Motors	22709849
Goodyear	63068
NAPA	10071
Toyota	87245-50360
V&W	303604

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18072

1991 Ford E-250 Econoline HVAC Heater Hose ZO 18072

Gates HVAC Heater Hose 18072 - Pipe To Thermostat

Position: Pipe To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 25.6
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1991 Ford E-250 Econoline Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.9L L6	Custom, XL	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe To Thermostat
5.0L V8	Custom, XL	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe To Thermostat
5.8L V8	Custom, XL	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe To Thermostat

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28467

1991 Ford E-250 Econoline HVAC Heater Hose ZO 28467

Gates HVAC Heater Hose 28467 - Heater To Engine, Heater To Thermostat, Heater To Water Pump

Position: Heater To Engine, Heater To Thermostat, Heater To Water Pump

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 16
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 12
Arm Length 2 : 304.8
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments
This Part Fits Following 1991 Ford E-250 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
4.9L L6 Custom, XL W/O Aux. Heater; Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Heater To Engine, Heater To Thermostat, Heater To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.9L L6	Custom, XL	W/O Aux. Heater; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Engine, Heater To Thermostat, Heater To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 18830

1991 Ford E-250 Econoline HVAC Heater Hose ZO 18830

Gates HVAC Heater Hose 18830 - Tee To Water Pump

Position: Tee To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.7
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1991 Ford E-250 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
5.8L V8 Custom, XL W/Calif. Emission System - Molded Heater Hose Fuel Type: GAS Tee To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.8L V8	Custom, XL	W/Calif. Emission System - Molded Heater Hose	Fuel Type: GAS	Tee To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 18821

1991 Ford E-250 Econoline HVAC Heater Hose ZO 18821

Gates HVAC Heater Hose 18821 - Heater To Engine, Heater To Water Pump

Position: Heater To Engine, Heater To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10.8
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1991 Ford E-250 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
5.0L V8 Custom, XL W/A.C.; W/Aux. Heater - Molded Heater Hose Fuel Type: GAS Heater To Engine, Heater To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Custom, XL	W/A.C.; W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Heater To Engine, Heater To Water Pump

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87650

1991 Ford E-250 Econoline HVAC Heater Hose DY 87650

Dayco HVAC Heater Hose 87650 - Pipe To Engine

Position: Pipe To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1991 Ford E-250 Econoline Engines.
Engine Sub Model Notes Position
5.0L V8 Custom, XL w/A.C., w/Aux. Heater - Small I.D. Heater Hose Pipe To Engine

Engine	Sub Model	Notes	Position
5.0L V8	Custom, XL	w/A.C., w/Aux. Heater - Small I.D. Heater Hose	Pipe To Engine

Part Interchange

ACDelco	16050M
CARQUEST	18773
Chrysler	4540175
Duralast	D87650
Ford	F4BZ-18472-B
Gates	18773
General Motors	25525792
General Motors	22659275
General Motors	10417434
Hyundai	97322-39000
Hyundai	97322-2D100
Hyundai	97312-39000
NAPA	10773
V&W	303650

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18071

1991 Ford E-250 Econoline HVAC Heater Hose ZO 18071

Gates HVAC Heater Hose 18071 - Pipe To Engine

Position: Pipe To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.6
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1991 Ford E-250 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
4.9L L6 Custom, XL W/O Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.9L L6	Custom, XL	W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

1991 Ford E-250 Econoline HVAC Heater Hose ZO 28466

Gates HVAC Heater Hose 28466 - Heater To Pipe

Position: Heater To Pipe

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1991 Ford E-250 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
4.9L L6 Custom, XL W/Aux. Heater; Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Heater To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.9L L6	Custom, XL	W/Aux. Heater; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87633

1991 Ford E-250 Econoline HVAC Heater Hose DY 87633

Dayco HVAC Heater Hose 87633 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 10
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1991 Ford E-250 Econoline Engines.
Engine Sub Model Notes Position
4.9L L6 Custom, XL w/A.C. - Small I.D. Heater Hose Heater To Pipe
Part Interchange
ACDelco 16042M
CARQUEST 18748
Chrysler 3849202
Duralast C87633
Gates 18748
General Motors 10317874
General Motors 88958005
General Motors 10329478
Goodyear 64145
Goodyear 63106
NAPA 10748
V&W 303633
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.9L L6	Custom, XL	w/A.C. - Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 18724

1991 Ford E-250 Econoline HVAC Heater Hose ZO 18724

Gates HVAC Heater Hose 18724 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.6
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1991 Ford E-250 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
4.9L L6 Custom, XL W/A.C. - Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.9L L6	Custom, XL	W/A.C. - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87619

1991 Ford E-250 Econoline HVAC Heater Hose DY 87619

Dayco HVAC Heater Hose 87619 - Heater To Engine

Position: Heater To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1991 Ford E-250 Econoline Engines.
Engine Sub Model Notes Position
5.0L V8 Custom, XL w/Aux. Heater - Small I.D. Heater Hose Heater To Engine

Engine	Sub Model	Notes	Position
5.0L V8	Custom, XL	w/Aux. Heater - Small I.D. Heater Hose	Heater To Engine

Part Interchange

ACDelco	16585M
ACDelco	18023L
CARQUEST	87619
CARQUEST	18703
Chrysler	55038222AB
Duralast	E87619
Ford	F4BZ-18472-A
Gates	87619
Gates	18703
General Motors	10425109
General Motors	10281555
General Motors	10233198
General Motors	10233197
NAPA	10527
NAPA	10703
V&W	303619

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18748

1991 Ford E-250 Econoline HVAC Heater Hose ZO 18748

Gates HVAC Heater Hose 18748 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.4
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1991 Ford E-250 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
4.9L L6 Custom, XL W/A.C. - Molded Heater Hose Fuel Type: GAS Heater To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.9L L6	Custom, XL	W/A.C. - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-2

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87661

1991 Ford E-250 Econoline HVAC Heater Hose DY 87661

Dayco HVAC Heater Hose 87661 - Tee To Water Pump

Position: Tee To Water Pump

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1991 Ford E-250 Econoline Engines.
Engine Sub Model Notes Position
5.0L V8 Custom, XL Calif. - Small I.D. Heater Hose Tee To Water Pump

Engine	Sub Model	Notes	Position
5.0L V8	Custom, XL	Calif. - Small I.D. Heater Hose	Tee To Water Pump

Part Interchange

ACDelco	14316S
ACDelco	14106S
ACDelco	14368S
ACDelco	14426S
CARQUEST	18799
CARQUEST	19088
CARQUEST	19279
CARQUEST	19376
Chrysler	05005375AB
Chrysler	05005370AC
Chrysler	05505375AB
Duralast	B87661
Gates	19376
Gates	19279
Gates	18799
Gates	19088
General Motors	25668357
General Motors	25681952
General Motors	25668354
General Motors	15755548
Goodyear	64314
NAPA	10799
NAPA	11088
NAPA	11279
NAPA	11151
V&W	303661

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87616

1991 Ford E-250 Econoline HVAC Heater Hose DY 87616

Dayco HVAC Heater Hose 87616 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 60
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1991 Ford E-250 Econoline Engines.
Engine Sub Model Notes Position
4.9L L6 Custom, XL w/o Aux. Heater - Small I.D. Heater Hose Heater To Pipe
Part Interchange
ACDelco 18010L
ACDelco 18377L
CARQUEST 18084
Chrysler 3849303
Duralast E87616
Freshstart 4338
Gates 19856
Gates 18084
General Motors 15644354
Goodyear 63074
Honda 79725-SCV-A00
NAPA 11856
NAPA 10084
V&W 303616
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.9L L6	Custom, XL	w/o Aux. Heater - Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 18799

1991 Ford E-250 Econoline HVAC Heater Hose ZO 18799

Gates HVAC Heater Hose 18799 - Tee To Water Pump

Position: Tee To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.1
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1991 Ford E-250 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
5.0L V8 Custom, XL W/Calif. Emission System - Molded Heater Hose Fuel Type: GAS Tee To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Custom, XL	W/Calif. Emission System - Molded Heater Hose	Fuel Type: GAS	Tee To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 18786

1991 Ford E-250 Econoline HVAC Heater Hose ZO 18786

Gates HVAC Heater Hose 18786 - Heater To Engine

Position: Heater To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 17.7
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1991 Ford E-250 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
4.9L L6 Custom, XL W/O Aux. Heater - Molded Heater Hose Fuel Type: GAS Heater To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.9L L6	Custom, XL	W/O Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Heater To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18703

1991 Ford E-250 Econoline HVAC Heater Hose ZO 18703

Gates HVAC Heater Hose 18703 - Heater To Engine

Position: Heater To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 19.6
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1991 Ford E-250 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
5.0L V8 Custom, XL W/Aux. Heater - Molded Heater Hose Fuel Type: GAS Heater To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Custom, XL	W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Heater To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18084

1991 Ford E-250 Econoline HVAC Heater Hose ZO 18084

Gates HVAC Heater Hose 18084 - Heater To Pipe

Position: Heater To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 60
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1991 Ford E-250 Econoline Engines.
Engine Sub Model Notes Fit Notes Position
4.9L L6 Custom, XL W/O Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.9L L6	Custom, XL	W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

1991 Ford E-250 Econoline HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Engine To Pipe, Heater To Engine, Pipe To Engine, Pipe-1 To Engine, Pipe-2 To Engine, Heater To Water Pump

Position: Engine To Pipe, Heater To Engine, Pipe To Engine, Pipe-1 To Engine, Pipe-2 To Engine, Heater To Water Pump

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1991 Ford E-250 Econoline Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.9L L6	Custom, XL	W/Aux. Heater; Cut to Length, 5" - Straight Heater Hose (Standard)	Fuel Type: GAS	Pipe To Engine
5.0L V8	Custom, XL	W/Aux. Heater; Cut to Length, 8" - Straight Heater Hose (Standard)	Transmission Speeds: 4 - Fuel Type: GAS - Transmission Control Type: Automatic	Engine To Pipe, Pipe-1 To Engine, Pipe-2 To Engine
5.8L V8	Custom, XL	Cut to Length, 17" - Straight Heater Hose (Standard)	Fuel Type: GAS	Engine To Pipe, Heater To Engine, Pipe-1 To Engine, Pipe-2 To Engine, Heater To Water Pump

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	16042M
CARQUEST	18748
Chrysler	3849202
Duralast	C87633
Gates	18748
General Motors	10317874
General Motors	88958005
General Motors	10329478
Goodyear	64145
Goodyear	63106
NAPA	10748
V&W	303633

ACDelco	18010L
ACDelco	18377L
CARQUEST	18084
Chrysler	3849303
Duralast	E87616
Freshstart	4338
Gates	19856
Gates	18084
General Motors	15644354
Goodyear	63074
Honda	79725-SCV-A00
NAPA	11856
NAPA	10084
V&W	303616

My Vehicle:

1991 Ford E-250 Econoline HVAC Heater Hose

Dayco HVAC Heater Hose 87605 - Pipe To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87675 - Heater To Water Pump, Heater To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87604 - Pipe To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18072 - Pipe To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28467 - Heater To Engine, Heater To Thermostat, Heater To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18830 - Tee To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18821 - Heater To Engine, Heater To Water Pump

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87650 - Pipe To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18071 - Pipe To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28466 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87633 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18724 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87619 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18748 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87661 - Tee To Water Pump

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87616 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18799 - Tee To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18786 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18703 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18084 - Heater To Pipe

Description: