2005 Ford Escape Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72244

Dayco Radiator Coolant Hose 72244 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 19
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 3/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2005 Ford Escape Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 Hybrid, XLS, XLT, XLT No Boundaries Curved Radiator Hose Fuel Type: GAS Upper
Part Interchange
ACDelco 24657L
CARQUEST 23538
Duralast E72244
Ford 5L84-8B274-AD
Gates 23538
Goodyear 62526
NAPA 16263
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	Hybrid, XLS, XLT, XLT No Boundaries	Curved Radiator Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72318

2005 Ford Escape Radiator Coolant Hose DY 72318

Dayco Radiator Coolant Hose 72318 - Lower, Lower - Radiator To Engine

Position: Lower, Lower - Radiator To Engine

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 11/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2005 Ford Escape Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 Hybrid, XLS, XLT, XLT No Boundaries Curved Radiator Hose Fuel Type: GAS, ELECTRIC/GAS Lower, Lower - Radiator To Engine
Part Interchange
ACDelco 20354S
ACDelco 20469S
CARQUEST 23177
Duralast D72318
Ford 5M6Z-8286-BD
Ford 5L8Z-8286-AA
Ford 5L84-8B273-AE
Gates 22474
Gates 23177
Goodyear 62527
Motorcraft KM4766
NAPA 9107
NAPA 9838
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	Hybrid, XLS, XLT, XLT No Boundaries	Curved Radiator Hose	Fuel Type: GAS, ELECTRIC/GAS	Lower, Lower - Radiator To Engine

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23177

2005 Ford Escape Radiator Coolant Hose ZO 23177

Gates Radiator Coolant Hose 23177 - Lower Front, Lower

Position: Lower Front, Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 11.5
Inside Diameter 1 : 1.25
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Ford Escape Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 Hybrid, XLS, XLT, XLT No Boundaries Molded Coolant Hose Fuel Type: ELECTRIC/GAS, GAS Lower Front, Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	Hybrid, XLS, XLT, XLT No Boundaries	Molded Coolant Hose	Fuel Type: ELECTRIC/GAS, GAS	Lower Front, Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23271

2005 Ford Escape Radiator Coolant Hose ZO 23271

Gates Radiator Coolant Hose 23271 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 18.9
Inside Diameter 1 : 1.43
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Ford Escape Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Limited, XLS, XLT, XLT Deportivo, XLT No Boundaries, XLT Sport Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Limited, XLS, XLT, XLT Deportivo, XLT No Boundaries, XLT Sport	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72245

2005 Ford Escape Radiator Coolant Hose DY 72245

Dayco Radiator Coolant Hose 72245 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15
End 1 Inside Diameter : 1 1/2
End 2 Inside Diameter : 1 1/2
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2005 Ford Escape Engines.
Engine Sub Model Notes Position
3.0L V6 Limited, XLS, XLT, XLT Deportivo, XLT No Boundaries, XLT Sport Curved Radiator Hose Lower

Engine	Sub Model	Notes	Position
3.0L V6	Limited, XLS, XLT, XLT Deportivo, XLT No Boundaries, XLT Sport	Curved Radiator Hose	Lower

Part Interchange

ACDelco	24316L
ACDelco	22591M
CARQUEST	23271
CARQUEST	22139
Duralast	E72245
Ford	5L84-8B273-BF
Ford	8L84-8B273-BB
Ford	8L8Z-8286-B
Freshstart	62613
Freshstart	62442
Gates	23271
Gates	22139
General Motors	25641167
Goodyear	62442
Goodyear	62781
Goodyear	62613
Motorcraft	KM-4952
Motorcraft	KM4767
NAPA	8807
NAPA	16009

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22805

2005 Ford Escape Radiator Coolant Hose ZO 22805

Gates Radiator Coolant Hose 22805 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 36.6
Inside Diameter 1 : 1.19
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Ford Escape Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Limited, XLS, XLT, XLT Deportivo, XLT No Boundaries, XLT Sport Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Limited, XLS, XLT, XLT Deportivo, XLT No Boundaries, XLT Sport	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72246

2005 Ford Escape Radiator Coolant Hose DY 72246

Dayco Radiator Coolant Hose 72246 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 30
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2005 Ford Escape Engines.
Engine Sub Model Notes Position
3.0L V6 Limited, XLS, XLT, XLT Deportivo, XLT No Boundaries, XLT Sport Curved Radiator Hose Upper
Part Interchange
ACDelco 26449X
ACDelco 24256L
CARQUEST 22805
Duralast E72246
Ford 5L8Z-8250-BC
Ford 5L84-8B274-AB
Gates 21864
Gates 22805
General Motors 94847236
Goodyear 62819
Goodyear 61737
NAPA 9440
NAPA 8554
Toyota 16571-16090
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L V6	Limited, XLS, XLT, XLT Deportivo, XLT No Boundaries, XLT Sport	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23538

2005 Ford Escape Radiator Coolant Hose ZO 23538

Gates Radiator Coolant Hose 23538 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 23.8
Inside Diameter 1 : 1.25
Inside Diameter 2 : 1.34
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Ford Escape Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 Hybrid, XLS, XLT, XLT No Boundaries Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	Hybrid, XLS, XLT, XLT No Boundaries	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23853

2005 Ford Escape Radiator Coolant Hose ZO 23853

Gates Radiator Coolant Hose 23853 - Upper Rear

Position: Upper Rear

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 21.1
Number of Branches : 1
Inside Diameter 1 : .75
Inside Diameter 2 : .75
Inside Diameter 3 : .38

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Ford Escape Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 Hybrid, XLS, XLT, XLT No Boundaries Molded Coolant Hose Fuel Type: ELECTRIC/GAS Upper Rear
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2005 Ford Escape Radiator Coolant Hose

Dayco Radiator Coolant Hose 72244 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72318 - Lower, Lower - Radiator To Engine

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23177 - Lower Front, Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23271 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72245 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22805 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72246 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23538 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23853 - Upper Rear

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

ACDelco	24657L
CARQUEST	23538
Duralast	E72244
Ford	5L84-8B274-AD
Gates	23538
Goodyear	62526
NAPA	16263

ACDelco	20354S
ACDelco	20469S
CARQUEST	23177
Duralast	D72318
Ford	5M6Z-8286-BD
Ford	5L8Z-8286-AA
Ford	5L84-8B273-AE
Gates	22474
Gates	23177
Goodyear	62527
Motorcraft	KM4766
NAPA	9107
NAPA	9838

ACDelco	26449X
ACDelco	24256L
CARQUEST	22805
Duralast	E72246
Ford	5L8Z-8250-BC
Ford	5L84-8B274-AB
Gates	21864
Gates	22805
General Motors	94847236
Goodyear	62819
Goodyear	61737
NAPA	9440
NAPA	8554
Toyota	16571-16090

My Vehicle:

2005 Ford Escape Radiator Coolant Hose

Dayco Radiator Coolant Hose 72244 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72318 - Lower, Lower - Radiator To Engine

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23177 - Lower Front, Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23271 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72245 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22805 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72246 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23538 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23853 - Upper Rear

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X