2008 Ford Escape HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87612

Dayco HVAC Heater Hose 87612 - Pipe to Engine (Inlet)

Position: Pipe to Engine (Inlet)

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2008 Ford Escape Engines.
Engine Sub Model Notes Position
2.3L L4 Hybrid, XLS, XLT Small I.D. Heater Hose Pipe to Engine (Inlet)
Part Interchange
ACDelco 14006S
CARQUEST 18080
Duralast B87612
Ford F8RZ-8548-EC
Ford 98BB-8548-DA
Ford F8RZ-8548-DA
Freshstart 3035
Gates 18080
Goodyear 63030
Motorcraft KM4403
Motorcraft KM4346
NAPA 10080
V&W 303612
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.3L L4	Hybrid, XLS, XLT	Small I.D. Heater Hose	Pipe to Engine (Inlet)

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88451

2008 Ford Escape HVAC Heater Hose DY 88451

Dayco HVAC Heater Hose 88451 - Coolant Reservoir

Position: Coolant Reservoir

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 17
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2008 Ford Escape Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 Hybrid, XLS, XLT Small I.D. Heater Hose Fuel Type: GAS Coolant Reservoir
3.0L V6 Limited, XLS, XLT Small I.D. Heater Hose Coolant Reservoir
Part Interchange
ACDelco 16303M
CARQUEST 19800
Duralast E88451
Ford 5L84-8W005-AL
Ford YF1Z-18472-DA
Gates 19800
Mazda L3CE-15-18YA
Mazda 5L84-8W005-AD
NAPA 11800
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	Hybrid, XLS, XLT	Small I.D. Heater Hose	Fuel Type: GAS	Coolant Reservoir
3.0L V6	Limited, XLS, XLT	Small I.D. Heater Hose		Coolant Reservoir

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87803

2008 Ford Escape HVAC Heater Hose DY 87803

Dayco HVAC Heater Hose 87803 - Heater Inlet (Right)

Position: Heater Inlet (Right)

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 24
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2008 Ford Escape Engines.
Engine Sub Model Notes Position
2.3L L4 Hybrid, XLS, XLT Small I.D. Heater Hose Heater Inlet (Right)
Part Interchange
ACDelco 18329L
Acura 79730-TX4-A00
CARQUEST 19348
Duralast E87803
Ford YL84-18K579-CA
Ford 8L8Z-18472-F
Ford 8L84-18K579-A
Ford 8L84-18K579-AG
Gates 19348
Motorcraft KH657
NAPA 11348
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.3L L4	Hybrid, XLS, XLT	Small I.D. Heater Hose	Heater Inlet (Right)

Part Name: HVAC Heater HoseBrand: GatesPart#: 19880

2008 Ford Escape HVAC Heater Hose ZO 19880

Gates HVAC Heater Hose 19880 - Engine To Valve

Position: Engine To Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 35.2
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Ford Escape Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 Hybrid, XLS, XLT Molded Heater Hose Fuel Type: ELECTRIC/GAS Engine To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	Hybrid, XLS, XLT	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Engine To Valve

Part Name: HVAC Heater HoseBrand: GatesPart#: 23652

2008 Ford Escape HVAC Heater Hose ZO 23652

Gates HVAC Heater Hose 23652 - Engine To Tee

Position: Engine To Tee

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 20.17
Number of Branches : 1
Inside Diameter 1 : .63
Inside Diameter 2 : .75
Inside Diameter 3 : .31
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Ford Escape Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Limited, XLS, XLT Molded Coolant Hose Fuel Type: GAS Engine To Tee
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2008 Ford Escape HVAC Heater Hose

Dayco HVAC Heater Hose 87612 - Pipe to Engine (Inlet)

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88451 - Coolant Reservoir

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87803 - Heater Inlet (Right)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19880 - Engine To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 23652 - Engine To Tee

Description:

Part Specifications:

Features:

Related HVAC Parts

ACDelco	14006S
CARQUEST	18080
Duralast	B87612
Ford	F8RZ-8548-EC
Ford	98BB-8548-DA
Ford	F8RZ-8548-DA
Freshstart	3035
Gates	18080
Goodyear	63030
Motorcraft	KM4403
Motorcraft	KM4346
NAPA	10080
V&W	303612

ACDelco	16303M
CARQUEST	19800
Duralast	E88451
Ford	5L84-8W005-AL
Ford	YF1Z-18472-DA
Gates	19800
Mazda	L3CE-15-18YA
Mazda	5L84-8W005-AD
NAPA	11800

ACDelco	18329L
Acura	79730-TX4-A00
CARQUEST	19348
Duralast	E87803
Ford	YL84-18K579-CA
Ford	8L8Z-18472-F
Ford	8L84-18K579-A
Ford	8L84-18K579-AG
Gates	19348
Motorcraft	KH657
NAPA	11348

My Vehicle:

2008 Ford Escape HVAC Heater Hose

Dayco HVAC Heater Hose 87612 - Pipe to Engine (Inlet)

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88451 - Coolant Reservoir

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87803 - Heater Inlet (Right)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19880 - Engine To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 23652 - Engine To Tee

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X