2009 Ford Escape Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71637

Dayco Radiator Coolant Hose 71637 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 1 5/16
End 2 Inside Diameter : 1 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2009 Ford Escape Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Hybrid, Limited, Limited Hybrid, XLS, XLT Curved Radiator Hose Fuel Type: GAS Lower

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Hybrid, Limited, Limited Hybrid, XLS, XLT	Curved Radiator Hose	Fuel Type: GAS	Lower

Part Interchange

ACDelco	22758M
ACDelco	20393S
ACDelco	22282M
ACDelco	20437S
CARQUEST	22721
Duralast	B71637
Ford	9L8Z-8286-A
Ford	F42Z-8286-A
Ford	F4BZ-8286-A
Ford	F32Z-8286-B
Freshstart	981
Gates	22988
Gates	22721
Gates	22011
Gates	24000
Goodyear	62029
Goodyear	62879
Mazda	FSD7-15-185
Mazda	FS59-15-18YA
Mazda	FS59-15-18Y
Mazda	FS59-15-189A
Mitsubishi	MN135916
Mitsubishi	MR571701
Motorcraft	KM4988
Motorcraft	KM2467
Motorcraft	KM2428
Motorcraft	KM2366
NAPA	9626
NAPA	9354
NAPA	8696

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24429

2009 Ford Escape Radiator Coolant Hose ZO 24429

Gates Radiator Coolant Hose 24429 - Lower Rear

Position: Lower Rear

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 11.4
Inside Diameter 1 : 1.25
Inside Diameter 2 : 1.38
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Ford Escape Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Hybrid, Limited, Limited Hybrid, XLS, XLT Molded Coolant Hose Fuel Type: ELECTRIC/GAS Lower Rear
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Hybrid, Limited, Limited Hybrid, XLS, XLT	Molded Coolant Hose	Fuel Type: ELECTRIC/GAS	Lower Rear

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72318

2009 Ford Escape Radiator Coolant Hose DY 72318

Dayco Radiator Coolant Hose 72318 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 11/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2009 Ford Escape Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Hybrid, Limited, Limited Hybrid, XLS, XLT Curved Radiator Hose Fuel Type: ELECTRIC/GAS Lower
Part Interchange
ACDelco 20354S
ACDelco 20469S
CARQUEST 23177
Duralast D72318
Ford 5M6Z-8286-BD
Ford 5L8Z-8286-AA
Ford 5L84-8B273-AE
Gates 22474
Gates 23177
Goodyear 62527
Motorcraft KM4766
NAPA 9107
NAPA 9838
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Hybrid, Limited, Limited Hybrid, XLS, XLT	Curved Radiator Hose	Fuel Type: ELECTRIC/GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24000

2009 Ford Escape Radiator Coolant Hose ZO 24000

Gates Radiator Coolant Hose 24000 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 13.09
Inside Diameter 1 : 1.25
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Ford Escape Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Hybrid, Limited, Limited Hybrid, XLS, XLT Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Hybrid, Limited, Limited Hybrid, XLS, XLT	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23853

2009 Ford Escape Radiator Coolant Hose ZO 23853

Gates Radiator Coolant Hose 23853 - Upper Front

Position: Upper Front

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 21.1
Number of Branches : 1
Inside Diameter 1 : .75
Inside Diameter 2 : .75
Inside Diameter 3 : .38

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Ford Escape Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Hybrid, Limited, Limited Hybrid, XLS, XLT Molded Coolant Hose Fuel Type: ELECTRIC/GAS Upper Front
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Hybrid, Limited, Limited Hybrid, XLS, XLT	Molded Coolant Hose	Fuel Type: ELECTRIC/GAS	Upper Front

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23683

2009 Ford Escape Radiator Coolant Hose ZO 23683

Gates Radiator Coolant Hose 23683 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 23.7
Inside Diameter 1 : 1.27
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Ford Escape Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Hybrid, Limited, Limited Hybrid, XLS, XLT Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Hybrid, Limited, Limited Hybrid, XLS, XLT	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23705

2009 Ford Escape Radiator Coolant Hose ZO 23705

Gates Radiator Coolant Hose 23705 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 21.43
Inside Diameter 1 : 1.5
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Ford Escape Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Limited, XLS, XLT Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Limited, XLS, XLT	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72578

2009 Ford Escape Radiator Coolant Hose DY 72578

Dayco Radiator Coolant Hose 72578 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 28 1/2
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/2
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2009 Ford Escape Engines.
Engine Sub Model Notes Position
3.0L V6 Limited, XLS, XLT Curved Radiator Hose Upper
Part Interchange
Duralast E72578
Ford 9L8Z-8260-B
Ford 9L84-8B274-BD
Goodyear 66147
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L V6	Limited, XLS, XLT	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23868

2009 Ford Escape Radiator Coolant Hose ZO 23868

Gates Radiator Coolant Hose 23868 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 37.2
Inside Diameter 1 : 1.25
Inside Diameter 2 : 1.45
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Ford Escape Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Limited, XLS, XLT Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Limited, XLS, XLT	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23871

2009 Ford Escape Radiator Coolant Hose ZO 23871

Gates Radiator Coolant Hose 23871 - Upper Rear

Position: Upper Rear

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 27.5
Inside Diameter 1 : 1.20
Inside Diameter 2 : 1.25
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Ford Escape Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Hybrid, Limited, Limited Hybrid, XLS, XLT Molded Coolant Hose Fuel Type: ELECTRIC/GAS Upper Rear
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	20354S
ACDelco	20469S
CARQUEST	23177
Duralast	D72318
Ford	5M6Z-8286-BD
Ford	5L8Z-8286-AA
Ford	5L84-8B273-AE
Gates	22474
Gates	23177
Goodyear	62527
Motorcraft	KM4766
NAPA	9107
NAPA	9838

Duralast	E72578
Ford	9L8Z-8260-B
Ford	9L84-8B274-BD
Goodyear	66147

My Vehicle:

2009 Ford Escape Radiator Coolant Hose

Dayco Radiator Coolant Hose 71637 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24429 - Lower Rear

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72318 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24000 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23853 - Upper Front

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23683 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23705 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72578 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23868 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23871 - Upper Rear

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X